i get this error while installing Traktor, i tried fixing permissions and verifying disk in disk utility , any1 got any idea how could i fix this problem and install traktor, N.B. i tried downloading it again
View 5 RepliesI have this problem. I had the x64 version of Vista running on my Macbook Pro and I just started to hate all the stuttering because of the wireless driver (which nobody can resolve), so I decided to put back my good-old trusty XP Pro 32bit. (I still have that CD all dusted somewhere around here).
So I wiped my Boot Camp partition, made another one (with the Assistant), and put in the XP CD, the computer restarted, it loaded up Windows Setup, copied all the files (in text mode) and then when the computer restarts and boots off the new partition, I get the:
"Disk Boot Error,
Press any key to restart..."
And of course the system freezes. I have to hold down the power button and shut down my Mac.
Now as far as I can figure this out, I think something messed with my mbr or something, because this only happens with the XP disc. Vista would want to install just fine and dandy.............
OS: Windows XP SP3
I had two 512MB 2Rx16 PC2-5300S-55-12 sticks of ram in my laptop.
I purchased 2 x 2GB 200PIN DDR2 SODIMM 256MX64 sticks to install.
When i put in the new sticks I get 2 short beeps and it doesn't finish booting the the OS.
Am I doing something wrong? I know that the OS will only recognize 3Gb but it should at least boot right?
Also after the post check this pops up:
The amount of system memory has changed.
If you did not change your memory...
To resolve this issue, try to reseat the memory
installing drivers for inspiron 15-3521 , showing an eror "stop working" on win 7 64 bit
View 3 Replies View RelatedMy laptop is a DV6 6121tx with product number QB367PA#ACJ.
While installing bluestacks, it displayed an error stating not able to recognise the graphics card in the system.
Any safe update for the same if available.
HP support assistant details of my graphics driver::
Radeon (TM) HD 6770M
8.882.2.3000 (30-09-2011)
I just recently removed vista and upgraded to Win7 32 bit. I tryed to add 4gb of RAM, due to the factory 1gb it came with. However got a Blue screen Error. After that I only installed 1 of/ 2gb stick of RAM and it worked.
My question is, I need 4gb of RAM for this c700, Should I update the Bios for Win 7. By doing so will the c700 allow me to install the 4gb of RAM and work?
I'm An Acer Aspire 6930G user and it has vista home premium installed as OS. Today When I was trying to install Windows Xp on it A blue Error Screen Appear in the beginning of windows installing...I tried with 3 different Xp cd's but still the same problem.
Here's the full form of what that blue screen says:
The problem has detected and windows has been shut down to prevent damage on your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow this steps:
Check for viruses in your computer. Remove any newly installed hard drives or hard drive controllers.Check your hard drives to make sure it is properly configured and terminated.
run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical Information:
*** STOP : 0x0000007B (0XF78D2524,0XC0000034,0X00000000,0X00000000)
I have a Macbook with a 1gb Ram and I would like to install a new 2gb Ram...how can I do that?
View 10 Replies View RelatedI got this message: You cannot install Mac OS X Update on this volume. This volume does not meet the requirements for this update.
It's a brand new Unibody Macbook how could it not work?
I used boot camp a few days ago without having my vista ultimate yet and I partitioned the hardrive in half then this morning I tried installing windows as said in this forum as to use the assistant in boot camp and I got to the part where it said where would you like to install the OS, they gave 4 different options and only one would have been enough space to put a partition so I figured I could delete the other partitions and see but now it left me with only 1 full HD , the other problem with this is the CD won't eject and keeps wanting to install the windows on the full partition , anyone know how to eject the cd any commands ? so maybe I could boot back to OSX
View 5 Replies View RelatedI'm planning on installing an Intel X25-M G2 in my UMBP. Do you guys have any before/after installation tips? Also, the company I purchased the drive from has a very limited return policy, so I want to push the SSD to its limits within the first week. What tasks should I perform? Any signs I should look for indicating a bad drive?
View 10 Replies View RelatedMy Macbook is coming in tomorrow, but I've already got a new hard drive that I'm planning to install on it. How do I install the OS onto the new drive? Do I just assemble the new drive in and put the CD that comes with the Macbook in and it'll do everything for me?
View 7 Replies View RelatedI installed oranges 3G modem and now my mbp does not boot! it freezes after showing the "gray screen"! I tried bootcamp and it works. resting pram didn't help and I have no backup! So what options do I have?I can try to reformat, but I have some important things on it...
View 10 Replies View RelatedGot my macbook earlier on this week, but i want to install windows so i can use it via bootcamp for when i need windows. how easy it is to do.
View 10 Replies View RelatedI just replaced a failed hard drive on someone's iBook G4 and am now trying to install the operating system. I have the two CD's called "iBook G4 software install and restore." Using them, things go fine until it is time to "select a destination volume," where it doesn't show any volume to select. Running the apple hardware test off the cd shows that it detects the new hard drive, which is OK, and all the other hardware is OK too. So, what to check next? New hard drive is a seagate momentus 5400.3 ST9120822A.
View 10 Replies View RelatedI'm interested in the 13.3" but I'm used to using Windows. How does it fare with XP? Vista?
View 10 Replies View RelatedI am installing the oem version of vista home premium 64 bit on my brand new macbook pro. I use bootcamp assistant to create a 60gig partition, insert my vista cd to start the install, use advanced options to let vista convert format to ntfs.
I followed the steps/guide exactly and everything goes fine. The system goes through installation but when does its first reboot and comes back to the install screen it errors on the step that says completing installation. It remains on the completing installation step for a few minutes and then an error comes up the says "Windows cannot configure one or more system components. To install windows restart the computer and restart the installation."
after i do install the windows 7 rc i plan on giving my mother this macbook in mid july. I plan on doing a full system restore. bAsically whipe out the entire HD and reinstall os x. If i do this will it wipe out my w7rc? i would like her to have a good amount of HD space and dont want the RC on here at all when i do it.
View 3 Replies View Relatedabout installing a SSD drive in a Mac but I have a couple of questions.
Is a clean install really nessasary? I know Windows computers come with lots of bloatware but do Macs?
Do I have to install drivers?
Do SSD's and Mac's play nice together?
For someone with average computer abilties is replacing the hard drive doable?
I have 3 old games that run super fast in XP, and I've read that a common fix seems to be running in Uniprocessor mode. XP only installs the ACPI Multiprocessor driver, and I can't change it. I can only select ACPI Multiprocessor, or Standard PC, and when I changed it to Standard PC I lost my keyboard and mouse (and subsequently had to reinstall XP).
Is there any way to either tell Bootcamp to disable one core, or to install XP with the Uniprocessor driver?
I'm running the early 2009 white macbook, and XP Home SP3.
I have a new unibody Macbook Pro 15 inch and after playing with it for a month and having XP in parallel only, I decided to install Vista Ultimate through boot camp so that I'll be able to play games on my macbook. Now here's the problem...
After I load up the boot camp assistant and I proceed to install Windows, the laptop restarts and goes to the Vista installation screen. I set up the region codes and language that I prefer and I hit next. Now, I finally hit the big "Install Now" button in the middle. After clicking on this button though, I hit my error:
Required cd/dvd drive device driver is missing.
My dvd drive is the Matsua DVD-R UJ-868
My IDE controller is the 82801BA Ultra ATA Storage Controller 244B
Also, no, I do not have an external DVD drive and so loading up another CD with the drivers is out of the question.
I have to swap out the current hard drive on my old Power Mac G5 because it's become unreadable. I've decided on the hard drive to replace it, but I have no idea how to go about installing the operating system. Moreover, my Power Mac G5 came with 10.3.5 Tiger, so is it safe to upgrade to Leopard even if I have older components?
View 5 Replies View Relatedi got my santa rosa MBP not too long ago (i bought it second hand). i am extremely happy with the machine as it is a 2.4ghz c2d with 160g hdd at 5400rpm and 8600gt 256mg gpu. i know this has been discussed many times, so i have been reading about the multi touch trackpad and was a bit bummed that i didnt get the newer 2008 penryn model instead. 2 days ago i was thiking about replacing the SR MBP top case with a penryn MBP top case and have the multi touch, 4 finger gesture ability on my SR MBP. therefore i started googling to see of people have actually done conversions and worked..fortunately, i found a member on this forum and confirmed that it actually works...but unfortunately there was not guide for this operation. I would really want to hear from those that has performed such replacement operation and perhaps give me some tips and what i may need to watch out for. in addition to that, does anybody know of a guide for this replacement? would the penryn top case keyboard and trackpad connections fit the SR MBP? any modifications needed?
View 3 Replies View RelatedI just got a new 640GB hard drive, and plan to install OS X, Windows XP, and Ubuntu on it. I would like some guides and recommendations on which operating system to stalled first, and what other preparation/softwares I need to get before installing.
View 5 Replies View RelatedI popped in the disc and selected Install. Well it starts installing and I go downstairs for about 15. When I come back up, the screen is off but the disc is still spinning. It's been going on like this for about 20 minutes now.
Is the screen suppose to go blank while installation occurs?
This is installing on a fresh new Macbook pro 13.
Normally when I shut power off my MacBook Pro, it takes about 4-5 seconds and then its off. Since I installed VMware Fusion yesterday, it takes about 1 minute to power off. What is going on? I read somewhere that when you quit a virtual machine you need to choose "kill all" to stop any background processes. How do I do this or is this just normal.
View 7 Replies View RelatedI just installed a clean copy of Snow Leopard but now I don't have permission to access my Time Machine backups, the drive itself shows all the dates of the backups like this:[url]
But say when I try to open any given folders inside the backup it says I don't have permission to do so: [url]
When I enter Time Machine it shows the folders as empty with the red no access icon on desired folders.
I have brought a new dell studio 1435 laptop and they provided me with default windows vista home premiun OS.
I have installed windows XP professional OS after changing the BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
Can i will be able to install the windows vista OS after installing windows Xp with the same BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
I got a film file, and I've made a menu for it on iDVD.
It's a .dvdproj file, and the file is small enough to fit on my 4.7GB DvD-R disc.
I've got it open in iDVD, and I've clicked the little Nuclear icon next to the Preview or PLAY icon. But it keeps saying "There was an Error in Encoding" or something alike when it gets to the end of the Menu burning process.
i was just going to clean some stuff up with onyx and it said my hd needed too be repaired, so i started up disk utility to see exaclty and got this gnarly error message.
What should i do?
bring it too apple?
Insert the leopard disk and do a repair from there
back up my hard drive?