Normally when I shut power off my MacBook Pro, it takes about 4-5 seconds and then its off. Since I installed VMware Fusion yesterday, it takes about 1 minute to power off. What is going on? I read somewhere that when you quit a virtual machine you need to choose "kill all" to stop any background processes. How do I do this or is this just normal.
View 7 RepliesI upgraded to Windows 7 today on my Fusion Virtual Machine on my Macbook today. I preceded it with a Time Machine backup, and it copied a few gigabytes, which I expected since I installed CS4 the other day.
Two hours later...
I installed the Windows 7 upgrade, and then did another Time Machine backup. This time it copied 36 gigabytes (the amount of my virtual machine file).
This got me thinking... Does Time Machine backup the entire virtual machine file each time there is a slight change? If so, then merely launching Windows in Fusion would be enough for Time Machine to backup the virtual machine file, using almost 40 gig on my backup drive most every time I launch time machine backup, even though the change is minor (a few bytes)
The consequence is that for a Fusion user, the backup device is going to fill awfully fast because of the relatively minor changes to the VM file, thus making for paltry space for history on all the Mac files.
I figure that a 320 Gig backup device is effectively extremely tiny for a 250 Gig HDD with only 90 Gig of files. My backup drive is already full after only ~8 backup sessions, hence deleting old history, which is hardly a few months old!
I have a 13" macbook pro 4gb of ram, 2.26Ghz. So im trying to upgrade my MCSA/MCSE to 2008, so i would need to run few VM's, at least 3 2008, and few clients.. You guys think ill be fine using my laptop or i should buy a desktop with around 8gb of ram?
View 10 Replies View RelatedI can't seem to get win 7 to connect to the internet in vmware fusion, I don't know if it is Win 7 or VMware.
View 10 Replies View RelatedI'm having an issue with VMware and Windows 7 64-bit. I was running VMware with Windows XP 32-bit, but having since installed Windows 7 64-bit. I am not able to get VMware to work with the 64-bit version of Windows 7. I believe this is because when I installed VMware I selected the 32-bit OS option because this was what I had when I was running Windows XP via boot camp. Is there anyway to get VMware to work with Windows 7 64-bit without reinstalling VMware. It's starting to get a little annoying booting into 7 with Boot Camp.
View 3 Replies View Relatedafter restoring my bootcamp partition from my back up, I can not figure out how to get it to work with VMware. VMware has the special boot camp spot but it won't start up my bootcamp. I have had this problem before and my solution was to completely uninstall VMware and then do the set up it gives you(I don't feel like doing that). So I need to re-add my bootcamp partition some how. Anyone know how to do that with out having to re-install VMware?
View 6 Replies View RelatedAfter getting my macbook pro in just, latest 13" model with SD card slot, I've been meaning to upgrade the RAM and hard drive in it, as I wasn't willing to pay Apple for the privilage. I've seen a few things like non apple HDDs not being recognised or being slow. I'm just wondering if this is still the case? If I buy a bigger HDD will it work?
Also, does anyone have a pdf manual for VmWare Fusion. I bought it off their site, but for the life of me I can't find a manual, only a starters guide.
Thought this is the best place to put this thread out of all the subforums...
I've been trying to get Quake Live to run in my XP VM on fusion.
It has Internet Explorer 8 installed. When I enter the game I get this really weird sound stuttering and 1fps in game.
Theres been reports that it works perfectly fine in Parrallels.
I've never used Windows on my Mac since I have my PC for PC things, but yeah, which is better in terms of speed and features?
View 10 Replies View RelatedWhen I start up VMware fusion and win7 it pretty much makes my computer un-usable while it loads,(programs become un responsive) witch takes about 10 min. Then after it finally gets into windows it take another 10 min to finish loading, but programs become usable with some lag. The weird thing is, is that it's not even using half of my CPU or all of my RAM. After all that, and it finishes loading it is usable. Anyone else have this problem? I'm giving it 2gb of ram, and it's 64bit win 7 RC.
View 10 Replies View RelatedI find it kind of laggy working on office 2007..
its a bit choppy, is anyone experiencing the same problems?
its almost to the point of being usless as it doesnt flow as nice as in bootcamp.
what settings are you using? i allocated 1GB Ram and 1 CPU.
I got the blue of death in VMware fusion with windows vista ultimate,I think "Defender" did it, every time I go to the vmware to start windows the blue screen shows up, anyway around this ? I can't do any safe modes or last good configs.
View 8 Replies View RelatedRecently, my HDD and DVD drive went-off together and Dell replaced the parts.
Since new HDD has been placed, support team installed Windows 7 Home Premium and I had a excellent booting time of 20 seconds (total boot time, BIOS A07, no mSATA).
While upgrading Dell drivers for bluetooth,prompted for BIOS update and upgraded it now.
After upgrading my BIOS to A09, now my BIOS boot time itself 19 seconds, and windows boot time is 23 seconds.
Why previously good performance went down after upgrading BIOS...
I just installed a clean copy of Snow Leopard but now I don't have permission to access my Time Machine backups, the drive itself shows all the dates of the backups like this:[url]
But say when I try to open any given folders inside the backup it says I don't have permission to do so: [url]
When I enter Time Machine it shows the folders as empty with the red no access icon on desired folders.
I recently updated my MBP with the newest patch and im getting higher cpu temps by just doing my usual web surfing and itunes. I see the cpu raise and my fans will kick on well above 2000 rpm. Before this my computer would normally be stable around 1999-2000 rpm. I can clearly tell by just typing that my mbp is runing hotter.
View 6 Replies View RelatedI have just ordered 720QM SXPS 1645 and waiting for it to get out of the 'In Production' time...
So, I was just curious about its performance...
Can anyone who has a Studio XPS 1645 (preferably i7) post their start-up / shutdown time?
My laptop Dell inspiron N5010 shutdown automatically after some time, i alse diagnose the problem, during diagnose i get the error 2000-0146 of hard disk.
laptop is also shutdown automatically during diagnose and in safe mode. How to diagnose this problem..
My problem with Lenovo G470 is this: every 10, 12 days it shutdowns and can't use it for a time. I'm doing anything (listening to music, writting a text, etc) or sometimes I'm afk and just doing nothing and it happens anyway. And then, for a time it's impossible to start windows. I turn on the laptop and the Lenovo logo appears, but then just shuts down.
Maybe 4-5 hours later it starts to work ok again. Im not sure aboout this because when this happen i usually leave it there and come back the next day.
Also, this happens on battery or plugged in. Is the same. Another weird thing that occurs sometimes is that when I'm using it on battery and I turn it off, the laptop shutdown, but the on/off button light doesn't turns off. I need to plug it in to solve this. I don't know if could be related, but I replaced the W7 home basic with the ultimate version. While I had it with home basic this didn't happened, but it was a short time (2 days) so I couldn't determine if this is related. Anyway I have the recovery CDs if a probable solution would be that.
I've read here about solutions like flashing the bios. I didn't do it but I could try it if you think it could work. I don't know if there are new updates. The truth is I'm a total newbie on flashing the bios.I can't turn on the laptop with the on/off button. But if I press space and escape it turns on again, and fails again of course.
I came across the VMware guide on installing W7 from within Fusion.
However, I'm curious if it is possible to have Fusion recognize my W7 boot camp parititon and create a virtual machine from that?
With Vista and XP, Fusion was able to automatically detect and set it up for me.
I have a 4 year old Dell which I have had cleaned and maintained by Dell services in order to keep temperatures and hardware in check.
However, I am constantly experiencing an "Event" according to Event viewer, or "Event 6008". What it says is "Computer shutdown at X time unexpectedly."
I have monitored temperatures, have all latest drivers for all components, yet I continually get the same crash. The computer goes completely off, no bluescreen, no error. I used "Who Crashed" in an attempt to record a dump file, but it keeps coming empty.
The error/crash occurs only during games, some more frequent than others. I have tried all possible options for those games, low to high settings/resolutions/etc, no background programs running - no difference.
Some days, the error/crash occurs more rarely when unplugged and running on battery(which don't last more than an hour), and once I plug it in to charge it, it starts crashing in a few minutes.
It is also running Windows 7 64-bit, upgraded from the stock Vista(where the error/crash also kept occuring).
The laptop is a Dell Studio 1555(the widescreen version). I took it to one of Dell's shop for them to "fix it", tho after running all their stress tests they told me there is nothing wrong with the computer. So 7 completely different games crash the computer, but Dell's stress tests fail to identify what is wrong with it?
Before I erase my hard drive and start all over again, I'd be grateful if someone could help me with this problem which should have been resolved with the newest version of VMWare Fusion (2.0.1 is installed):
1. I created a Boot Camp partition and installed Windows XP SP3 and then activated it.
2. I next installed Virtual Machine on my Mac OS X partition, started up the Boot Camp partition as a VM, then manually installed VMWare Tools (they didn't install automatically). Then I activated Windows XP without a hitch.
3. I modified the VM settings to dual processor, 2 GB RAM
4. I next restarted into the Windows Boot Camp partition directly and installed the following MS Office Suites : MS Office Enterprise 2007, MS Office Project Standard 2007 and MS Office Visio Professional 2007. I activated each one following their installations via internet without a problem.
5. I then restarted in Mac OS X, started up my Boot Camp VM using VMWare Fusion, and tried to open an Office application. I was asked to reactivate, but I've already used the maximum number of activations (3) for this suite and cannot run any of these applications in my VM. Am I doing something wrong? Should a normal user be required to reactivate an Office suite in the virtual machine every time he switches between the two partitions? I suppose I could simply use MS Office 2007 by starting up into the Boot Camp partition, but this defeats the purpose of VMWare Fusion, doesn't it?
I had deleted temporary files in my Boot Camp partition using a CCleaner utility and am wondering if there was a file there I should have kept?
I have been looking for a new computer and am looking at the mac book pro since it is 13 inches now something I like. I have a few questions though regarding bootcamp and Vmware.
So say I install windows xp via bootcamp. Can I still view files that I had on my mac partition or does apple not allow that to happen.
Second question:
Say I install xp via bootcamp. Can I run it with Vmware too or do i have to have a fresh install just for Vmware?
Lastly, what do you like more bootcamp, vmware or parallel?
I am currently a windows user ever since I started using computers so I do not have much knowledge with macs.
I had put fusion on my notebook and it crashed, now that I have a partition with fusion thats no good I was wondering if I could delete the fusion and just install windows without bothering OSX
View 10 Replies View RelatedI think the question explains itself. I tried installing maya and I can't find the licensing program that I need to register it. And Maya keeps whining about the inability to launch the product configuration wizard. SO...
I may as well use it in windows since I have a working copy for that. However, I know bootcamp yields the best result but I want/need to be in osx also instead of isolating myself totally when I use Maya so between parallels and vmware, which would run Maya better? You can throw out a guess, doesn't have to be based on factual real life tests.
TLDR version: Which runs Maya better? VMware or Parallels?
I have an Inspiron 700m of which I am the original owner. I just ordered a new Hitachi Travelstar 7K100 80GB 7200rpm drive. I have only done one OS install prior to this when I assembled a desktop PC but that was several years ago and I was following an online guide (MySuperPC) virtually step-by-step.
I have contacted Dell and they sent me a reinstall copy of the OS (XP Home) on CD.
My biggest concern is partitioning. I'm really not clear on what this is all about or how I should go about doing this. I've had one person tell me not to partition at all. Another tell me to make it 50%-50% and another tell me to make a 5GB partition just for the OS.
This a basic email, web browsing, document reading type of machine that I use when I'm traveling.
I can follow to install the OS onto my new hard drive? I've seen a few, but they seem to be more geared toward recovery type reinstallations and several seem geared more toward "power users."
I use my boot camp partition in Vmware. How do I make a bootable copy of that? I want to know because in Boot camp I'm gonna install Windows 7, but I might still need XP so I was thinking about using Vmware for that.
View 7 Replies View Relatedif you can run VMWare or Parallels off of a bootcamp drive, however I CAN'T afford to buy that. So instead I got Virtual Box. Now virtual Box wasn't in the stickies so I think this should be ok to discuss, if not please feel free to delete it Mods. Anyway, I can't figure out how to get the Virtual Box to load from my Bootcamp drive. Anyone else use this and know what to do? I dont want to have to delete that partition or create a new one just to use VB. I don't have a large enough Hard Drive.
View 10 Replies View RelatedI want to put Win7 on my macbook pro and plan to use it with VMWare 3 as well as for dual booting. Is it better to go with the 32bit or the 64bit version of Win7.
Im running snow leopard on the macbook now... i know Apple isnt officially supporting win7 until later this year but has anyone else had any problems running Win7 under bootcamp on snow leopard?
I was sort of interested in doing this, until I read a little more about what XP Mode is, and how it works as a virtual machine under Windows.
Is this just asking for trouble? I mean, running a virtual machine from within a virtual machine on a Mac, if I am understanding Microsoft's XP mode concept.
it would be pretty slick to be able to do that, i guess it isn't possible, but MAN they should get on that.
View 4 Replies View Related