When I start up VMware fusion and win7 it pretty much makes my computer un-usable while it loads,(programs become un responsive) witch takes about 10 min. Then after it finally gets into windows it take another 10 min to finish loading, but programs become usable with some lag. The weird thing is, is that it's not even using half of my CPU or all of my RAM. After all that, and it finishes loading it is usable. Anyone else have this problem? I'm giving it 2gb of ram, and it's 64bit win 7 RC.
I have a 13" macbook pro 4gb of ram, 2.26Ghz. So im trying to upgrade my MCSA/MCSE to 2008, so i would need to run few VM's, at least 3 2008, and few clients.. You guys think ill be fine using my laptop or i should buy a desktop with around 8gb of ram?
I'm having an issue with VMware and Windows 7 64-bit. I was running VMware with Windows XP 32-bit, but having since installed Windows 7 64-bit. I am not able to get VMware to work with the 64-bit version of Windows 7. I believe this is because when I installed VMware I selected the 32-bit OS option because this was what I had when I was running Windows XP via boot camp. Is there anyway to get VMware to work with Windows 7 64-bit without reinstalling VMware. It's starting to get a little annoying booting into 7 with Boot Camp.
after restoring my bootcamp partition from my back up, I can not figure out how to get it to work with VMware. VMware has the special boot camp spot but it won't start up my bootcamp. I have had this problem before and my solution was to completely uninstall VMware and then do the set up it gives you(I don't feel like doing that). So I need to re-add my bootcamp partition some how. Anyone know how to do that with out having to re-install VMware?
After getting my macbook pro in just, latest 13" model with SD card slot, I've been meaning to upgrade the RAM and hard drive in it, as I wasn't willing to pay Apple for the privilage. I've seen a few things like non apple HDDs not being recognised or being slow. I'm just wondering if this is still the case? If I buy a bigger HDD will it work?
Also, does anyone have a pdf manual for VmWare Fusion. I bought it off their site, but for the life of me I can't find a manual, only a starters guide.
I upgraded to Windows 7 today on my Fusion Virtual Machine on my Macbook today. I preceded it with a Time Machine backup, and it copied a few gigabytes, which I expected since I installed CS4 the other day.
Two hours later... I installed the Windows 7 upgrade, and then did another Time Machine backup. This time it copied 36 gigabytes (the amount of my virtual machine file).
This got me thinking... Does Time Machine backup the entire virtual machine file each time there is a slight change? If so, then merely launching Windows in Fusion would be enough for Time Machine to backup the virtual machine file, using almost 40 gig on my backup drive most every time I launch time machine backup, even though the change is minor (a few bytes)
The consequence is that for a Fusion user, the backup device is going to fill awfully fast because of the relatively minor changes to the VM file, thus making for paltry space for history on all the Mac files.
I figure that a 320 Gig backup device is effectively extremely tiny for a 250 Gig HDD with only 90 Gig of files. My backup drive is already full after only ~8 backup sessions, hence deleting old history, which is hardly a few months old!
Before I erase my hard drive and start all over again, I'd be grateful if someone could help me with this problem which should have been resolved with the newest version of VMWare Fusion (2.0.1 is installed):
1. I created a Boot Camp partition and installed Windows XP SP3 and then activated it.
2. I next installed Virtual Machine on my Mac OS X partition, started up the Boot Camp partition as a VM, then manually installed VMWare Tools (they didn't install automatically). Then I activated Windows XP without a hitch.
3. I modified the VM settings to dual processor, 2 GB RAM
4. I next restarted into the Windows Boot Camp partition directly and installed the following MS Office Suites : MS Office Enterprise 2007, MS Office Project Standard 2007 and MS Office Visio Professional 2007. I activated each one following their installations via internet without a problem.
5. I then restarted in Mac OS X, started up my Boot Camp VM using VMWare Fusion, and tried to open an Office application. I was asked to reactivate, but I've already used the maximum number of activations (3) for this suite and cannot run any of these applications in my VM. Am I doing something wrong? Should a normal user be required to reactivate an Office suite in the virtual machine every time he switches between the two partitions? I suppose I could simply use MS Office 2007 by starting up into the Boot Camp partition, but this defeats the purpose of VMWare Fusion, doesn't it?
I had deleted temporary files in my Boot Camp partition using a CCleaner utility and am wondering if there was a file there I should have kept?
Normally when I shut power off my MacBook Pro, it takes about 4-5 seconds and then its off. Since I installed VMware Fusion yesterday, it takes about 1 minute to power off. What is going on? I read somewhere that when you quit a virtual machine you need to choose "kill all" to stop any background processes. How do I do this or is this just normal.
It looks like lightroom and premier has closed the gap in the windows land compared to Aperture and Final Cut. And with OpenCL's focus on using the GPU to boost performance and Apple doing it's very best to off Adobe.... is there any real advantage in software in OSX anymore? Or is it all about familiarity and preference?
I was kind of considering the i5 MBP since I'm more into editing than gaming but honestly, if I can just get a beefy Win7 laptop and run software with the same features that are just as reliable I don't really see the point in spending less for more.
If anyone experiencing long load times when booting up Windows 7? It takes considerably longer for me to boot Win7 than SL...
When Win7 boots, whether it be a cold boot or reboot, ill find myself hanging at a blank/black screen with nothing other than a blinking underscore in the top left corner for what seems like a minute, then it'll go to the normal "Starting Windows..." screen from there. Is a format/reinstall in order?
I want to install windows by Bootcamp. But I've found some problem about a partition on my HDD.
My MacbookPro HDD has 27 GB free space remain. And it's has only 1 partition on HDD. I try to create a new partition, 10-15 GB on my HDD for Bootcamp. I just want to run windows for some program, some games. But it always show "verification failed", "don't have enough space", "partition failed"...etc. on bootcamp and disk utility
I've seen some thread about a partition for bootcamp problem on some website. Some solution such as
1. use iDefrag for HDD then try to create a new partition.
2. Shrink your HDD space (disk utility) , revert , then try to create a new partition by Bootcamp.
3. Try to remove some files, that size is over 1 GB, then try to make a new partition.
4. Backup your harddrive, reinstall then try to create a new partition (I don't want to do this)...
When i created my Bootcamp partition i mde it way too big and i will never use all the space i created. Is there a way to shrink it without losing what i have on that partition? I tried to shrink it using Winclone but that did not work and if i create a backup using Winclone i believe that when you restore it the partition must be the same size as the original, is this correct?
How easy is it to install windows on a partition of the HD of a Macbook air instead of running windows in a virtual machine environnement of OS X ? It should be much faster and consume less power, no ?