Apple :: Macbook 13' 1.1 - Discolored Palm Rest
May 4, 2009My GF has the Macbook 1.1 and she has the discolored palm rest issue, she has apple care and she says that it doesn't expire.
View 9 RepliesMy GF has the Macbook 1.1 and she has the discolored palm rest issue, she has apple care and she says that it doesn't expire.
View 9 Repliesi have had my like MB for just over a year...so my warranty just ran out. i noted that the top case has started cracking around the edge, and asking my friends and people who has the macbook, this is a pretty common problem. but mine is getting pretty bad.
Do you think Apple would send me a replacement topcase and if so, how much would it cost. i don't know if anyone else has had this problem and asked for a replacement.
Which is preferable for the palm rest area...the shiney plastic of studio XPS of 13" or the aluminum of XPS 13"?
View 3 Replies View RelatedThere are dark grey marks on both side of the palm rest on my M1210 palm rest which doesn't come off no matter what i use on it. There were never there until i cleaned my laptop with some iso-propyl alcohol. I wiped the whole laptop and around the two palm rest area, silver stuff were coming off my laptop and transferring into onto my cloth.
The place where the silver things come off became a big dark spot on my laptop.
I sent my computer for repair to Dell after a fall and when it came back, it came back with a variety of new problem. turns out, dell people damaged the the motherboard and forgot a few screws with a new palm rest when they were "fixing" it.
Anyway, I got a technician to change the motherboard and I got a new palm rest. Now I have the feeling the palm rest/mouse pad get a bit warmer than before but I am not really sure.
How hot should it be for a normally functionning XPS 1530? It is not burning hot or anything but I don't remember if before it was getting this warm.
Before I buy this laptop I am wondering what is the palm rest made from? I did chat to dell and they said magnesium? It doesnt look like magnesium to me
View 6 Replies View Relatedanyone familiar with taking apart a m1530? cause i got a new motherboard with a 8600gt and a new palmrest and i dont wanna open my laptop without having some knowledge about it...
View 8 Replies View RelatedI have an AR series Vaio and ive just got a new palm rest for it, can anyone tell me how easy they are to fit as i was expecting just a bit of plastic but its quite an in depth part where i think the keyboard and a few other things have to come off.
Its a Vaio VGN-AR51SU i have identical to this
I just got a new 6930p. It's rather warm on the left side where the palm would rest and causes a rather big discomfort.
Is there any type of cooling pad that would cool it down?
I know the HP dv5t's hard drive is on the left side , but is not located near the palm rest...instead it's near the battery compartment, just below it.
So what is under the left palm rest? Is it the GPU? CPU? It's pretty hot when in "High Performance" mode, but slightly warm when in "Power Saver" mode.
The silver trim that runs around the border of the case is starting to wear away and pit around where my palms rest. Is this something covered by warranty? And if not is it reasonably affordable / simple to fix?
The main reason I wanted this computer was for it's looks, so the fact that it's already starting to form visual defects is really, really annoying.
I've been trying to find reviews of the new Vostro 1520 on the web and have been having varying degrees of luck.
I have noticed however that a few people have complained that the left palm rest of the Vostro 1520 is too hot. One person measured it to be 103 deg F
Recently got a Latitude E6400 w/ 2.66Ghz, 4GB RAM, nvidia 160m, 250GB (7200rpm). The left Palm rest is often very hot to keep my hand on it. I even use Antec Laptop cooler pad.
Checking temperatures using speedfan, I have following temps when the left palm rest is hot:
GPU - 55-60C
HDD - 42C
Temp1: 37C
Core 0: 32C
Core 1: 38C
Has anyone removed the stickers from the right palmrest of their E6400 (or similar)? The Windows Vista Basic sticker is really annoying to me, but it seems to be very securely attached and I don't want to ruin anything in the process of removing it....
View 10 Replies View RelatedHas anyone attempted to replace the palmrest/keyboard assembly on their S XPS 16? I've done keyboards on older Dell laptops but this seems a bit more involved. The metal trim on the palm rest is coming up so it would be nice to have it replaced,
View 3 Replies View RelatedI bought a Z2 VAIO a while back, and curiously my Z26 didn't come with the VAIO spec sticker on the palm rest. Now, I know that you would be going 'why would you want that?'
(since I read that people usually take those off because they look horrendous), but would it indicate something iffy with my Z26? I bought this from a Sony Style store
Just bought a Sony Viao 448 J/B the palm rest gets very warm almost hot when running. This is my first Viao so I'm not familiar with the normal symptoms.
View 5 Replies View RelatedI used my Studio 1535 without problem about 4-5 months and temperatures were fine. But from some time I have very strange problem. First my charger became relatively very hot, my mother consider it as very hot as well.
After my hard disk becomes hot 39-40 C, and now I guess as result from fan system and HDD high temperature, my left palm rest (typically warm on most notebooks) is hot too.
I was giving my 1645 a nice cleaning when I noticed a depression on the left hand side palm corner. The black of the palm rest actually sinks below the the silver trimming. Is this normal? is it supposed to be flush? Does it mean I need yet ANOTHER part replaced on this damn laptop?
View 10 Replies View RelatedDoes anyone else get a slight tingling or vibrating sensation on the right palmrest? It doesn't really bother me but I just find it peculiar....it's really hard to describe except that my hand can feel some kind of vibrating going on (it's very subtle and doesn't make noise). Anybody else know what I mean?
View 10 Replies View RelatedAs the title says I'm looking for some new parts.
I'm currently in need of new:
LCD hinges
fans
palm rest
mouse buttons
Anyone know the part numbers for these or could you reference me to a parts list or online site that would sell these parts?
To start I should remind everyone that i'm not a mac user. I have never owned a mac or used OSX properly before today. As such, my opinions should be taken as coming from someone who has much knowledge and experience as far as PC's are concerned, but who is a total mac n00b.
First Impressions
When I first walked over to the Macbooks I was quite taken aback. The build quality is out of this world. In fact, I immediately walked over to the latest PC laptops to compare and immediately thought "manufacturing FAIL". Really, the Macbooks are italian sports cars, and PC's are 30 year old farm tractors to use the typical "car analogy".
The Macbook
I really only had any interest in the Macbook when I first went to the Apple stand, but came away with the intention of buying a MacBook Pro. Let me explain:
The MacBook's build quality is awesome. It's solid, no creaking plastic or flexable build, completely and utterly solid. Awesome.............
I have been speculating over this prospect giving the direction that Apple took with the starting price of the 24" iMac (upgrade everything else and downgrade the VRAM).
I mean, this is something I would like to see, but I wonder if it is a smart move on Apple's part given how much they make off the current MBP's with the so called Apple Tax.
And, if they made this move, one has to wonder if it still would be considered a Pro.
This is going to be my very first Mac. I'm really excited about it, but I don't know which one I should go for... I narrowed it down to these two models. Which one should I go for and why?
View 10 Replies View RelatedI bought a black macbook this summer and every night when I'm in bed trying to do work I can barely see which keys is which. Obviously this wouldn't be a cheap fix but is there a way or is it possible to install the new light up keys of the new macbooks onto a pre-remodel macbook?
View 10 Replies View RelatedI downloaded this updated for my unibody Macbook Pro, and I think it's pretty vital. However, it gave me this error when I tried to install it: "You cannot install Macbook, Macbook Pro software update on this volume. This update requires Mac OS X 10.5.5 or newer." Now don't tell me that I have selected the wrong partition to install the update, or that I need to update my OS to 10.5.5 because I already have 10.5.6 and I chose the Macintosh HD partition to install the update.
View 6 Replies View RelatedSo I'm definitely getting a 13" Macbook or Macbook Pro. Apple has some great prices on refurbs so that's probably the route I'll be going however I'm having trouble discerning the difference between the 13" Aluminum Unibody standard macbook and the 13" Unibody Macbook Pro. From what I've read they both have the upgraded screen, they're obviously both unibody, both have the large button-less trackpad, and both have the 9400m. They even have the same dimensions and the only difference I can see between the images is a slightly different case bevel (also the firewire and sd card ports, both are useless to me).
Unfortunately, none of the Apple stores or BestBuys in the area have a non-pro unibody 13" Macbook for me to actually handle and compare. So, basically, what makes the pro version with the slower cpu and smaller hard drive at the same price point worth it?
If I make an image of my hdd from my white macbook with disk utility onto a hard drive I take out of a unibody macbook pro will it work and boot properly?
I will do this by taking the 250gb hdd out of the unibody macbook pro and putting it into a sata external usb hdd enclosure, then making an image of my current 120gb white macbook and writing the image onto the 250gb. After, I plan to put the 250gb hdd back into the macbook pro and boot it up normally as if everything from my white macbook was just copied onto the macbook pro.
Was curious what is the difference between the short-lived aluminum macbooks and macbook pros. Only thing i could spot is the illuminated keyboard.
View 8 Replies View RelatedShe has a white macbook with leopard I think, and has a separate partition in which she has boot camp, she uses specialized software that can only run in windows (doesnt run in vm). She got a new macbook air but wants to keep everything intact.
Do programs like duper clone drives with all files intact, including partitions? Keep in mind that the windows side is more important, installation of this software can only be done remotely from Russia, so it's a bit of a hassle if we screw up, we have to contact IT at a specific time and get them to do it.
Would I have to take the drive of the macbook air out? Or can i just clone to an external hard drive and then move that to the mba hard drive, in target disc mode or something.