As the title says I'm looking for some new parts.
I'm currently in need of new:
LCD hinges
fans
palm rest
mouse buttons
Anyone know the part numbers for these or could you reference me to a parts list or online site that would sell these parts?
Which is preferable for the palm rest area...the shiney plastic of studio XPS of 13" or the aluminum of XPS 13"?
View 3 Replies View RelatedThere are dark grey marks on both side of the palm rest on my M1210 palm rest which doesn't come off no matter what i use on it. There were never there until i cleaned my laptop with some iso-propyl alcohol. I wiped the whole laptop and around the two palm rest area, silver stuff were coming off my laptop and transferring into onto my cloth.
The place where the silver things come off became a big dark spot on my laptop.
I sent my computer for repair to Dell after a fall and when it came back, it came back with a variety of new problem. turns out, dell people damaged the the motherboard and forgot a few screws with a new palm rest when they were "fixing" it.
Anyway, I got a technician to change the motherboard and I got a new palm rest. Now I have the feeling the palm rest/mouse pad get a bit warmer than before but I am not really sure.
How hot should it be for a normally functionning XPS 1530? It is not burning hot or anything but I don't remember if before it was getting this warm.
Before I buy this laptop I am wondering what is the palm rest made from? I did chat to dell and they said magnesium? It doesnt look like magnesium to me
View 6 Replies View Relatedanyone familiar with taking apart a m1530? cause i got a new motherboard with a 8600gt and a new palmrest and i dont wanna open my laptop without having some knowledge about it...
View 8 Replies View RelatedThe silver trim that runs around the border of the case is starting to wear away and pit around where my palms rest. Is this something covered by warranty? And if not is it reasonably affordable / simple to fix?
The main reason I wanted this computer was for it's looks, so the fact that it's already starting to form visual defects is really, really annoying.
I've been trying to find reviews of the new Vostro 1520 on the web and have been having varying degrees of luck.
I have noticed however that a few people have complained that the left palm rest of the Vostro 1520 is too hot. One person measured it to be 103 deg F
Recently got a Latitude E6400 w/ 2.66Ghz, 4GB RAM, nvidia 160m, 250GB (7200rpm). The left Palm rest is often very hot to keep my hand on it. I even use Antec Laptop cooler pad.
Checking temperatures using speedfan, I have following temps when the left palm rest is hot:
GPU - 55-60C
HDD - 42C
Temp1: 37C
Core 0: 32C
Core 1: 38C
Has anyone removed the stickers from the right palmrest of their E6400 (or similar)? The Windows Vista Basic sticker is really annoying to me, but it seems to be very securely attached and I don't want to ruin anything in the process of removing it....
View 10 Replies View RelatedHas anyone attempted to replace the palmrest/keyboard assembly on their S XPS 16? I've done keyboards on older Dell laptops but this seems a bit more involved. The metal trim on the palm rest is coming up so it would be nice to have it replaced,
View 3 Replies View RelatedI used my Studio 1535 without problem about 4-5 months and temperatures were fine. But from some time I have very strange problem. First my charger became relatively very hot, my mother consider it as very hot as well.
After my hard disk becomes hot 39-40 C, and now I guess as result from fan system and HDD high temperature, my left palm rest (typically warm on most notebooks) is hot too.
I have an AR series Vaio and ive just got a new palm rest for it, can anyone tell me how easy they are to fit as i was expecting just a bit of plastic but its quite an in depth part where i think the keyboard and a few other things have to come off.
Its a Vaio VGN-AR51SU i have identical to this
I just got a new 6930p. It's rather warm on the left side where the palm would rest and causes a rather big discomfort.
Is there any type of cooling pad that would cool it down?
I know the HP dv5t's hard drive is on the left side , but is not located near the palm rest...instead it's near the battery compartment, just below it.
So what is under the left palm rest? Is it the GPU? CPU? It's pretty hot when in "High Performance" mode, but slightly warm when in "Power Saver" mode.
My GF has the Macbook 1.1 and she has the discolored palm rest issue, she has apple care and she says that it doesn't expire.
View 9 Replies View RelatedI was giving my 1645 a nice cleaning when I noticed a depression on the left hand side palm corner. The black of the palm rest actually sinks below the the silver trimming. Is this normal? is it supposed to be flush? Does it mean I need yet ANOTHER part replaced on this damn laptop?
View 10 Replies View RelatedI bought a Z2 VAIO a while back, and curiously my Z26 didn't come with the VAIO spec sticker on the palm rest. Now, I know that you would be going 'why would you want that?'
(since I read that people usually take those off because they look horrendous), but would it indicate something iffy with my Z26? I bought this from a Sony Style store
Just bought a Sony Viao 448 J/B the palm rest gets very warm almost hot when running. This is my first Viao so I'm not familiar with the normal symptoms.
View 5 Replies View RelatedDoes anyone else get a slight tingling or vibrating sensation on the right palmrest? It doesn't really bother me but I just find it peculiar....it's really hard to describe except that my hand can feel some kind of vibrating going on (it's very subtle and doesn't make noise). Anybody else know what I mean?
View 10 Replies View Relatedi have had my like MB for just over a year...so my warranty just ran out. i noted that the top case has started cracking around the edge, and asking my friends and people who has the macbook, this is a pretty common problem. but mine is getting pretty bad.
Do you think Apple would send me a replacement topcase and if so, how much would it cost. i don't know if anyone else has had this problem and asked for a replacement.
I'm looking for an extra Hard Drive bezel/Caddy (the flimsy plastic piece you screw onto your hard drive) for my Vostro 1500. The piece has to cost pennies to make, but I'm having a hard time finding one.
I was appalled to find it here at this price ($45):
http://www.laptopking.com/kingpartde...ategory=caddys
Anyone know of a good place to find this part?
They have the entire caddy for sale on ebay, but I'm just looking for the plastic piece:
http://search.ebay.com/search/search...=32%26fsoo%3D2
I need some rubber feet and the LCD Rubbers too.
Technical support tells me to purchase the following..
Vince Dash : Hardware kit - Contains chassis rubber foot and Bluetooth module holder
Part number: 538346-001
Price: $44.65
Vince Dash : LCD panel front bezel assembly $67.45
PArt number: 576810-001
I think its outrageous to purchase these two packages for over 100.00 just to get some rubber 1x1inch pieces?
Few days before i started a thread regarding the display issue .. and today i was got a replacement for my keyboard...
the old one was very strong and sturdy ... the new one was fragile, and flexible.. i called the CC then and reported that teh keyboard is very fragile...
he told me that currently all replacement keyboards are like that...
it seems that Indian customers are the ones who have been ill treated with cheap parts...
I have a Acer Travelmate 2420 that needs a new LCD back cover... The hinges were/are overly tight and over time the back cover has cracked and now it is to the point where replacement part is necessary..
the part number is 60.TB2V1.004 butr I am having difficulty tracking it down..
I have found a site that lists itm, but does not have it in stock..
[url]
although i am due for a notebook upgrade..i would like to repair this one for a spare home user for my wife or children
Where can I purchase replacement parts for the dv5t motherboard without spending an arm or a leg. I spilled coffee on the and now it's pretty much toast. It won't even start up.
View 10 Replies View RelatedI got my wife an HP DV2 for Mother's Day. She was extremely excited because she has needed a new laptop for quite some time. Anyway, we opened it and started to boot it up everything was looking good. I then happened to glance down at the mouse buttons and noticed that the left button looks as if it was pressed. There is definitely a gap when running your finger across the buttons. When pressing the right mouse button, it moves down as far as the left button sits while unpressed.
Now, I should clarify that the left button still works, it is just sitting lower than it seems like it should. I just wanted to see if anyone else has experienced this with their "brand new out of the box" HP DV2. My wife and I were both extremely bummed out, only because I equate it to buying a brand new car and noticing that the headlight is pressed in a little it and is uneven. Are we being too picky? To us, it seems ridiculous that a $700 laptop would have a quality issue like this.
I'm attaching a couple pictures showing the issue - in one, you can see me pressing the right button down to the level of the left unpressed button.
I tried to clean the underneath of the touchpad mouse buttons of this Dell Vostro 2520 Notebook. since then both the buttons are not working. I am not being able to use the left right buttons and now using an external mouse.
What do I need to replace? How to purchase and from where. dell techincl support phone waiting time is currently 2-3 hours. I just tried.
Is there any way to preserve finish of the Sony Vaio FW, particularly on the mouse buttons and where the palm-rest is, I hear the silver stippled paint finish wears away leaving bare white plastic underneath.
Is there a skin or plastic screen cover that you guys use or recommend to prevent this or hide defects?
I recently picked up this bad boy for just $744 (after 12.3% bing cashback (Google it if you don't know what it is)).
[url]
Has anyone heard any other issues with this laptop?
It has the 1600x900 screen which I've heard some criticism of (I heard something about it having a one-lamp "eco" screen) but I don't know if that applies to the model I bought or how good the eco screen is.
If I can get a skin that is precut for that laptop's dimensions in particular (nothing fancy, just black would be good), that would be awesome.
I'm considering this skin, but it's not precut, and I don't know how good it is...
[url]
I was going to be assembling an m1710 this weekend....
I called Dell Spare Parts a few days ago, and placed an order for the following;
HG345 Refurb bottom plastics, m1710
FF084 Refurb palmrest assy, m1710
J8841 Refurb speakers, LED, m1710
CF426 Refurb hinge cover, m1710
I've been watching the order on Dell's site all week, as it was scheduled to ship (on or before today) (2/21/08), and I opted for Next Day shipping.
When I placed the order, the woman I spoke with asked for my Service Tag number. I, um... don't HAVE one... I didn't say this, I simply said I don't have that information at the moment. She asked how I got the part numbers, and I told her from their own Spare Parts page.
Well....the order got cancelled today. Saw it online while at work, just before I left for the day. Another order number with the identical items was created, with a scheduled ship date of 3/3/08. WHAT?
The woman just called....she states they cannot process my order without a service tag number. YOU HAVE GOT TO BE KIDDING ME!
I told her I don't have a tag number....she asked if I was building one. "Yes." To which I hear...
"Oh....well, I don't think our supplier will allow that without a service tag number, because we reserve those parts for people who bought m1710's."
I said "That's amazing...because I know a number of people who have done the same thing I'm trying to do, and had no problems getting these parts."
"Well, that's because they have m1710's"
*mad enought to scream at this point* "Um, no...where do you think I got the idea from?? I'm certainly not the first person to have this idea."
how I can get them to sell me some refurbished plastics? What's the secret password?
