I don't think I'm losing my hearing, but it seems like 80% volume now is the same as 50% volume before on my MBP 15 after the 10.6.2 update. I checked my sound output and it is set to internal speakers, which I think is normal(?)
View 3 RepliesI have a 2ghz P-M, 2GB RAM, 7800GTX equipped XPS M170 and never really took attention to this. It has CPU whine, and when you scroll webpages, it slows the scrolling process and emits the higher pitched intermittent whine until you stop, then it resumes a lower volume whine.
It's not really noticable unless in a quiet situation, but it's very annoying to me in such situations, especially because it limits the scrolling speed of pages and things in programs.
I've reformatted several times and i'm pretty sure its either the CPU or GPU whining. Gaming eprformance is unaffected.
Can I call Dell and have them do anyhting about this? I don't have Bluetooth, as some other topics have said works, but I don't think I should have to buy a module to have my CPU stop whining.
question concerning the WUXGA screen on the 17" macbook pro. The questions may sound pretty basic, but I've only got experience with 1280*800 =)
Can i put the resolution of the screen on, let's say 1440*900 if i chose to? Or is it really THAT resolution (1920*1200) that is supported only?
In the case it is possible: does it look like a normal 17" screen with a native resolution of 1440*900
In the case that it is not possible: how small are the letters? I looked at a 15.4 inch screen with 1680*...? and i thought it was pretty OK. Is it comparable with a 17" 1920*1200?
Most of the time the laptop will be used for programming, and a game from time to time (but from experience i know games can be set on lower resolutions, resulting in ugly stuff, just the way i like it).
I have got a thinkpad x61 with win 7 pro x64. A few days ago I installed hotkeys drivers from Lenovo. On Screen Display problem: when I press volume up/down Button the volume decreases completely. To make louder or dim the volume I have to hold the buttons. All the other hotkeys functions work . why? what I have to do?
View 6 Replies View RelatedVolume Indicator not showing when adjusting volume with fn+f8/f9 key on ProBook 4740s 64bit Windows 7?
View 3 Replies View RelatedSince I installed Windows on the Mac, the Windows volume is always on the desktop. How do I disable the automount of that disk, or permanently eject it while in Mac OS X?
View 9 Replies View RelatedJust lookin' over the spec's on the new iphone and I noticed that the headphones now support volume control. I didn't see this fact listed before anywhere else or during the keynote... Its about time apple! The only major downside is that they are not enabling the feature on the 3G iphone. [url]
View 8 Replies View RelatedI usually turn my volume really low or even mute it before shutting down my mbp, and when I turn on my mbp, the startup chime will be as loud as that volume level.
Yesterday, I used onyx to clean up some of the preferences,etc. Now, it doesn't matter if I mute the volume before shutting down, the start-up chime will always be there at the same level.
I rather not download the startup sound preference program if i really dont have to.
I have an early 2009 Macbook unibody (2.4 Ghz).
I find the volume output to be extremely inadequate. All of my volume are at max. I click the little speaker icon in the taskbar to make sure everything (speakers, system sounds, application sounds) is max and sure it enough...they are.
I own a Macbook, and on that if F2 and F3 directly it changes the brightness on the laptop and also volume too
View 4 Replies View RelatedAnyone else noticed these two? I used to run Win7 via Boot Camp, but even turned to max in both software and the OS control panel, volume was always painfully low; never found a definitive fix via Google.
Also, seemed like double-clicking via two-fingered tapping was iffy; sometimes worked, sometimes didn't.
Any way to fix these two? I'm missing Windows 7.
When i play any game(CS 1.6, Halo, UT3 absolute any game) my fps drops to 30 and lower... Why? or maybe this is becouse i have Vista SP1, but drivers is for Vista SP0...
And i can't download newer drivers becouse downloading is not accessable...
I've got a Vostro 1500 and the specs for Dell's charger/adapter can be found here: http://support.dell.com/support/edoc...html/specs.htm
Dell's charger: 90W, 19.5V, 4.62A
Is it ok if I use a 90W, 19.5V, 3.34A charger instead? I'm using it right now, charger getting hot though. What do you think? Is it safe to continue using this charger with lower amp rating?
Del Studios Xps 13 New prices for lower specs
As dell Usuall doing
I get idle temps of 65-70 CPU and 70-75 GPU and gaming temps of 76-80 CPU and 85+ GPU when gaming.
Right now i've been leaning toward the method of spraying all the vents with compressed air, is there anything else I can do that doesn't involve taking apart the laptop?
add Dell to the growing list (HP is another) who doesn't care about Canadians nor Canadian customers as they restrict the options compared to Americans and what is available to U.S. customers.
E.g. M4400 has way less options for Cdn customers compared to U.S. customers. American customers can order 15.4" WUXGA TrueLife RGB LED display (1920x1200) while Canadian Dell customers are limited to only a 15.4” WXGA (1280x800) LED Display.
well basically my question is in the title...but i was wonder is there anyway i can lower the watt draw (11 watts stock) while im on battery power.
I know powermizer does this but can i lower it even more?
Unlike most of you here (probably), I'm an old guy who doesn't run his displays at native resolution. I typically selecting something lower so things are easier to read. My 4:3 machines at home and work are set up at 1024 x 768.
I'm considering an Inspiron 1720 with anti-glare 1440 x 900 display, 128MB NVIDIA 8400M GS card and the standard Dell driver which, according to Dell Downloads, is 174.31 for Vista-32bits. I assume that's the driver Dell would install if I ordered this machine on line today.
I tried chat will Dell sales but, after repeating the question several times, they finally admitted the only thing they could tell me was that I could configure it with 1920 x 1200 glass, the opposite direction from which I wanted to go. They suggested I contact Dell Tech Support, but one can't get through to them without a product code for an in-warranty notebook.
So, here I am asking whether anyone has an Inspiron 1720 configured this way. If so, does that combination of video card and driver permit selecting 1280 x 800 and/or 1024 x 640? I don't want to get stuck with a resolution that results in distortion because it isn't in the screen's native 1.6:1 aspect ratio.
I purchased a Dell M1730 laptop a couple of years ago. A few months after I received it, the original LCD panel was shattered in an accident.
I shipped it back to Dell and they replaced it with a new Samsung panel (not sure what it had before) which looked just as good, except that after a couple of months it developed a one pixel wide red vertical line 80% of the way up from the bottom of the screen near the left side.
Because the line wasn't very distracting (only showed up on certain colors like dark grey and dark red) I lived with it for a while, but I recently decided I should get it fixed since my warranty is running out this year.
I emailed Dell recently and they sent a technician to my house while I was at work (my wife was at home) and he repaired the M1730 so that the red vertical line was no longer present.
I'm not sure what the exact nature of the repairs were, but he did mention to my wife that apparently when my panel was previously replaced, they had only used 2 of 8 screws .....
I've been thinking about drilling a few holies in the bottom the chassis for air intake on my laptop. First I want to hear your opinion about whether I'm thinking soundly or am just plain crazy.
The underside of my 5536G looks like this: [url]
What appears to be an air-intake right below where the fan should be (right hand side, close to camera), is only a ribbed area in solid plastics. This is where all other laptops I have seen have their main intake holes for air. The 5536G however has to rely on the small intake holes on the hatch to the left (which conseals the RAM) and a another equally small air intake in the front (you can just about see it in the pic).
Now the question is, will I lower the temps by drilling a few holes right below the center of the fan to let some cold air in, or will I completely mess up the chassis airflow which Acers engineers have carefully crafted? As far as I understand, laptops use radial fans, and cold air should be supplied in the center of the fan. The way it is now seems to work against that idea: cold air has to somehow be sucked through the spinning fanblades, not enter it from the center (no hole there!).
I am getting temps around 95 degrees C under load (2.2 GHz Turion), undervolting lowered that to about 83.
Are there drivers, or software, that allow access and the bility to tweak the core clock speed on the FX 1700M video card in my M4400? I beleive the FX 1700M consumes an extra 15W of power (over the 770M) simply because it is clocked faster.
View 4 Replies View RelatedI recently purchased a lenovo p500 ideapad from bestbuy around 3 weeks ago. just on thursday, i press the f11 key to lower the brightness and it imidiatley went very dim. i cannot bring the brightness back up even tho the button and the computer says the brightness is all the way up. the screen is at the dimmest setting possible. i am running windows 8 and i have checked the drivers to see if they are updated and they are but i cannot bring the brightness back up. this is very frustrating.
View 9 Replies View RelatedI have encountered vertical lines on the lower half of my screen and it is always there. When you reboot, it comes up right away. I read where someone else had the same problem and it would come and go at will..
View 3 Replies View Relatedjust like my sony laptop FW510f, it have the ATI 4650, but the GPU frequency is 450 and memory is 600. i think dell can do like it to avoid the fan's noisy(its runs when i press the start button), and the throttling problem.
BTW: my 1647's fan keep spin and the gpu temp is 50 when its idle, is it normal? the ambient no more than 20c
I'm working on an Extensa 5420 that has a broken plastic tab that holds the power jack in the lower case. Anyone had any luck with glue/epoxy (or some other techique) to secure the power jack in position so it won't fall inside the case?
View 6 Replies View RelatedI have a dv6t Quad ed with core i7 820QM processor. Is it possible to undervolt the processor or run it at lower speeds to save battery?
View 3 Replies View RelatedI'm looking at the configurators for the 32bit and 64bit Precision M4400s, and the almost the exact same configuration (difference is 64bit has 4gb ram vs. 2gb) costs about $50 less and comes with a free monitor (not really necessary...but getting rid of it doesn't result in any price drop).
Is this an error on Dell's site, or are they actively pushing 64bit and lowering the price of the system overall intentionally?
32bit: [url]
64bit: [url]
options:
Intel® Core™ 2 Duo T9800
Genuine Windows Vista® Ultimate
15.4" UltraSharp™ WUXGA
3 Year Basic Limited Warranty and 3 Year NBD On-Site Service
NVIDIA Quadro FX 770M
4.0GB, DDR2-800 SDRAM (2.0GB for 32 bit model)
250GB Hard Drive, 7200RPM with Free Fall Sensor
8X DVD+/-RW w/Roxio and Cyberlink Power DVD
6 Cell Battery
Intel® WiFi Link 5300
Internal English Backlit Keyboard
64bit: $2,058 + FREE! Dell 19 inch™ 1909WFP Widescreen Flat Panel, Analog
32bit: $2,097
I have an HP ENVY TS 17 Notebook with NVIDIA GT 740M and Intel 4600HD Graphics Drivers, and running Windows 7. Whenever I want to change the resolution in games to a lower resolution than the desktop resolution, the game shrinks its view leaving couple of inches black bars on the edges. For example if my desktop resolution is 1920x1080, and I want to run a game in 1600x900, the game doesn't fill the screen, instead, it leaves some amount of blank space on the edges of the screen.
In order to solve this problem, I tried the following steps:First I tried to locate the Display tab in NVIDIA Control panel in order to set scaling/stretching to 'Full Screen', but my version of NVIDIA CP doesn't have the Display Tab (My NVIDIA drivers are the latest version).Then I found out that I should do this from the Intel HD Graphics Control Panel. My Intel HD Graphics CP has an option named "Scaling" under Display > Display Settings, and it only shows the option Maintain Display Scaling which is checked by default and doesn't allow changing it. Also, after searching through internet I saw that some people suggested entering the 'Advanced Settings' and trying to make changes there. When I try to enter Advanced Settings under Display, it says "This display does not support any of the advanced settings".
After trying these without success, I tried updating the Intel's driver through their website hoping this can fix the problem. I ran Intel's small application on their website which identifies my chipset and suggests me the latest driver for that chipset. The website told me that the driver that is installed on my computer is 10.18.10.3304, and there is an update for this which is 15.33.18.64.3496 (or 10.18.10.3496). So I downloaded the file, but when I tried running it, it gave me this error message: "The drivre being installed is not validated for this computer. Please obtain the appropriate driver from the computer manufacturer. Setup will now exit." which doesn't make any sense.
The little LED on the shift key sometimes is on but Caps Lock is not on (all keys still in lower case). This is always the case when I log on freshly. Â pressing Shift two times to enable Caps Lock (screen indicator comes on, ALL CAPS NOW) and pressing it two times again turns off Caps Lock as well as the LED indicator. Â But sometimes it still behaves eradically. Any software update on this?
View 9 Replies View RelatedI have a inspiron 1710 It has been ok for the most part But the issue that i seem to have and bugs the heck out of me is that when i'm typing and tap the caps lock its like every thing stops and it is a few seconds then the caps lock changes to upper or lower and i have to wait for it to come back on then i can type again But i can not just tap caps and type , BUT if i have a external key board No problem.
View 2 Replies View Related