Apple :: What's The Made Of LCD Panel
Aug 29, 2009My MBP 15" mid 2009 LCD panel S/N is 9CA4, Does anybody know what's the made of it? LG or...?
View 10 RepliesMy MBP 15" mid 2009 LCD panel S/N is 9CA4, Does anybody know what's the made of it? LG or...?
View 10 Repliesi heard that there are 2 types of sony, one made in japan and another one made in usa . is this true or what ? is there sony z series made in japan and another one made in usa ?and if yes, then what is the difference between the sony z series japan version and the sony z series usa version ?
View 5 Replies View RelatedThe time is near for me to upgrade to a new machine. While this should be an exciting time, I find it more and more stressful as to which MacBook to purchase. I'm currently deciding between the Air and the 2.4 GHz MacBook. The MacBook weighs in only slightly more than the Air, and the thickness of the machines are getting closer to each other. However, the real separating factor for me is the display and the trackpad. I've grown very accustomed to a mouse button, and taking that away feels.. awkward at best. I don't know if I would be able to get used to that. The real separating factor here is the display.
View 10 Replies View Relatedwell last night and this morning i was busy making my self a home made cooling pad, with some crap laying around the house. I don't know if there is already one but i'll put this one up. I will upload pictures tomorrow. The total project was about 1 hour and cost less than $10. It also has a speed control which is cool (it is built on my ac/dc adapter so you will make yours). My mother-tongue is not English but French, so excuse the words i might use or not use. Also their are some tools i couldn't translate the name, but when pics are up I'm sure you will know..................
View 10 Replies View RelatedThe shipping Packing Slip for my unit lists the following for the LCD panel..
PRODUCT CODE: U771G
Description: Module, Liquid Crystal Display 17WUX, Red/green/blue,Lg Philips LCD,M6400..
Can anyone confirm if that the correct product code for my Original Quote which stated "17 inch Wide Screen WUXGA RGB-LED LCD for M6400 (320-7312)"..
i'm guessing that its the RGB backlit display i'm expecting. its NOT the covet model.. and I didn't go with the E2E because I wanted more of a matte display..
My other question is:.. is it just me or does the LCD Housing seems to be very flimsy and has lots of flex when lifted from the corners..
Apple will introduce a new iPhone in 2010 that will employ a touch-sensitive plastic back casing similar to the one used on the company's new Magic Mouse, one analyst has said.
In an interview with Bloomberg, Robert Chen with Goldman Sachs Group Inc. said the new iPhone will go into production as early as April, and will be available to customers in June or July. He said the plastic back panel of the phone could have a touch-sensitive solid shell, much like on the Magic Mouse.
Indeed, Apple in recent years has described the benefits of touch-sensitive enclosures for future handheld devices in patent filings like the one made in July of 2006 entitled: "Electronic Device Having Display and Surrounding Touch Sensitive Bezel for User Interface and Control."
The new hardware could also include an updated version of the iPhone operating system, Chen said.
"Apple’s going to put a lot of innovation, not just on the hardware, but also on the software of the new iPhone," he told Bloomberg.......................
how to get your LE to go FULL ION FOREVER!
Step 1. Download [url]
Step 2. UnRar and plug in usb/flash stick then run HPUSBFW (only file not in a folder)
Step 3. Select location in the Top and FAT 32 then check Quick Format and Create a DOS startup disk. **DOS system files are in folder labled accordingly** Click Start to create bootdisk
Step 4. Move contents inside "copy to USB" to USB (copy files not the folder) Once on USB run the batch file.
Step 5. Reboot and press esc twice on HP screen press F9 and select to boot from USB
Step 6. Windows98 prompt appears type HPBQ189.EXE and press Enter. Next press G (this is not an option on the screen) screen will pop up with non vista as option 0 or vista as option 1. Press 1 and exit to prompt.
REBOOT! New hardware found! install latest Nvidea drivers (graphic and nforce) and you are all set.
does anyone know who makes it and what the model/codes are for this screen?
Matte 15" UMBP 1440x900
How about the bottom panel...
View 10 Replies View Relatedare the dell notebooks made in ireland yet ?
dell was moved to poland ,not?
what the screen/lcd cover that fits flush over the LCD is made of? Is it plastic or is it really glass like they advertise it is? I ask because people on youtube who are posting reviews say it's plastic and not glass. I'd like to know one way or the other before deciding to order.
View 3 Replies View RelatedAlright the other day while surfing the net i noticed a strange noise coming from my laptop and I really didn't think of anything.
So anyway just 5 minutes ago while doing the same usual things like surfing the net, the same noise came out again. Just once, and it sounded something like this, DEEENGGG......
(i really don't know how to explain it) this sound appeared while my volume is muted. Anyway I know it's not the hard drive noise so i am a little worried but more so confused. I'm thinking is this an indicator that maybe the temperature of my laptop is hot that causes that sound
I have got an Acer 7720G laptop which comes preinstalled with vista.
I haved made a seperate partition and installed "Open Suse" (linux).
Each time I started my laptop it would give me an option from which I could choose which OS I wanted to use.
I wated to get rid of Open Suse and so I removed that partition.
But each time when I started my laptop that OS selector menu would still come.
So, I have then delted all my partitions and created new ones.
When I have installed the "Recovery - Factory Default" to bring back the laptop to its original state - it did install windows but now I cannot boot my laptop any more because it still tries to bring up the OS selector menu (but fails).
I think here might be a prob lem with the Acer "Recovery partition" which I didnt dare to touch.
So I replaced my thermal paste and noticed that my hard drive was not a Seagate like my spec. sheet listed, 500GB w/free-fall sensor, but was an older toshiba model!!!!
This unit was a "brand new replacement".... so I just thought I would warn any folks who are spending good money and could possibly not be getting what they pay for.
what the actual parts were on the SZ that are made of carbon fiber?
View 10 Replies View Relatedlast month I upgrade the HSDPA board to the Vaio VGN-Z790LDX in order to use any sim card from any international cellphone company and it worked at first attempt .
now I just replaced the IFX-517 and the wwan to the Vaio VGN-TT290NBX and I have installed one IFX-517 having the sim card slot and I placed the unlocked wwan GTM382.
anyone did the same upgrade?
which driver are the best in order to make it working properly?
I am asking this because I did try to install the Option driver /Globe Trotter Connect and the Vaio Smart Network but for many times it was not succefully done .
the first times the minicard was in the device manager list but just till the laptop was on.......and after restart it was not there .
now finally after many times removing the driver and the minicard the system is working but I don't know for how long........
now I am wondering that I did mistake at the beginning because I mixed sony driver and Option drive and software.............in few words I made a Cocktail,
I made a USB back up using the Dell Backup and Recovery/Factory backup. I can't seem to get my laptop to boot up from a USB, though. I've looked at all the options I see via F2 and F12. But I see no mention of USB as something it could boot from.
My machine is an Inspiron 15 7000 series.
Backup Recovery version1.75.63
I am considering a range of Vaios at the moment (including some HP models; although Vaios are my #1 choice).
With the new Core i7 Processors out, I am wondering whether buying a Core 2 Duo processor of any sort (TT: SU; Z & SR: P9xxx, etc) now would mean they would be totally redundant by Q1 of 2010 or do you see some variants of the Core 2 Duo processor lasting a bit longer?
I realise technology continues to move forward at a rapid pace and was just curious about where Core 2 Duo stands in Q1 of next year.
I have a DV9535nr and I want to do a clean install to get rid of crapware. BestBuy furnished me a set of discs (at no cost unlike some I have read about) but will these contain the crap I want to eliminate? When I try to run the recovery disc feature and make my own from my hard drive it tells me a set has been made (yeah, yeah, ok ok MS/HP) so it looks like BestBuy beat me to it.
I ordered a set from HP to be on the safe(r) side but have read in this forum that these might not be such a good idea, either... bugs etc...
I have a HP d103tx notebook that I bought some months ago and was working fine until this one day I installed the Intel® USB 3.0 eXtensible Host Controller Driver from the HP website.After installing that only USB 3.0 port work and not USB 2.0 ports. I tried uninstalling it but no love.. Tried reinstalling it but still no love.. Tried changing the settings to default through BIOS but still..
View 7 Replies View RelatedI have a HP touchsmart envy 15 and I am trying to restore computer to factory default. About 6 months ago, the computer said I could make a boot disc and be able to use that to restore my computer to factory and after I make the boot disc, I can delete the recovery partition as it will be stored on the disc. So I went ahead and make the disc (it turned out to be 4 discs) and the computer deleted the partition. Now I am here trying to use the discs to restore to factory, however, my optical drive isn't detected when the bios is booting. Because of this I need to turn those 4 discs into a bootable USB thumb drive. I have looked all over and there are many different ways of converting 1 disc into usb, but not 4.
View 1 Replies View Relatedi ordered a 15.6" studio 15 with a LCD panel 1080p (1920x1080). i wanna switch to 720p (1280x720) because i think it's a waste of money, especially if i don't need it (i'll be using it for homework, college, and occasional video games/movies).
1. what are the advantages of 1080p vs. lower resolutions?
2.how would the screen look compared to lower resolutions?
3.how much battery power would it consume, compared to lower resolutions?
4.would it have any other effects on your eyes, compared to lower resolutions?
My Laptop is Vostro 1500 with WXGA (1280x800) and my friend's ASUS G1S with 1680x1050 panel.
He doesn't like his panel because everything is too small and we decide to change panel.
Vostro panel woking great with the ASUS G1S, but ASUS panel can not work with Vostro, when turn on, the screen split 2 part in POST and change to dark when log on to windows.
We just change the panel, can not change the inverter.
How to solve this problem? Can anyone help me?
I did a clean install of Win 7 Pro and now the IDT control panel has disappeared along with the system tray icon.
I tried reinstalling the drivers but haven't figured out a way to get it to come back. I know its bloat, but I liked having the extra control over the sound...
Im just about to buy a Vaio TZ because of it's size, weight and its great battery life. My only concern is the display, if it's a 6-bit or 8-bit panel.
I know the Vaio TT is already out and sports an 8-bit panel, but with a price as twice as the TZ right know, the only reason to go for the TT would be that the TZ had a bad 6-bit panel.
I reinstalled windows xp on the m1730 system, the game panel (this is the little lcd panel above the keyboard on the right side) worked for a bit and now doesn't come on, I have downloaded and installed all the drivers from the dell website but it still doesn't work,
View 10 Replies View RelatedI remember accidentally opening some transparent window that had a quick access to all the parts on my XPS m1530 and I believe it had the name
Dell in the titlebar, and it looked different than the Microsoft one (welcome window or whatever).
There are two different LED Panels used for E4200.
Toshiba is not a good one, which has some bleeding issue.
Samsung is the best, which is soft.
You can figure out which panel you own on your E4200 via looking at the bottom of LED panel (Golden color means that you have a Toshiba one, and Silver one will be Samsung. Toshiba one also shows a lot of small bulbs at the edge, bad, bad...
Does anyone have a calibrated profile for their RGBLED Backlit screen? I guess what I mean is, ones that are calibrated with a hardware calibrator?
View 3 Replies View RelatedI need to access my lcd panel to remove a nasty coffee stain inside the screen (between backlight and panel).
I was able to find and remove 2 screws on the top right and left hand side of the panel