Dell :: Are My 1520 Hinges Bad?
Jan 6, 2009http://www.youtube.com/watch?v=FqP2gosv_yE
Its been doing this for a while. Just wondering if I should buy a new set of hinges or maybe a new lid?
http://www.youtube.com/watch?v=FqP2gosv_yE
Its been doing this for a while. Just wondering if I should buy a new set of hinges or maybe a new lid?
i'd like my hinges to be stiffer/have more friction. any tips or should i get replacement from ebay? they're kinda pricey though, over $40 plus shipping
View 4 Replies View RelatedI purchased a new lid and hinges from eBay for my XPS WLED M1330. I currently have the red cover, but the X on the XPS logo peeled off and was lost, so I bought a new black one. It is just the lid and hinges, not the screen.
View 10 Replies View RelatedI have noticed the hinges are really tight and it takes two hands to open it. 1 to hold the bottom and one to lift the screen. Will this get better over time or do i just live with it?
View 7 Replies View RelatedMy 640M is still working fine but the LCD hinges seem to be a little loose. i.e. if I tilt the laptop a little, the lcd seems to bend on either side I bend it upon.
I noticed that my friends' laptops - Dell inspirons but newer models ( 14, 1420) etc do not have this loose LCD hinges.
I dont remember if the hinges were loose when a new laptop arrived, but its been about 3 years now and I notice this
I have had my M1530 for abut half a year. At the very beginning I noticed that the screen is not very stiff, for example I the screen lid can be moved by about 2 cm almost with no effort (with one finger) also the he hinges (the bar inside) moves up few millimeters when closing the lid.
It's noticeable when looking at the hinge, and also I can feel that from the force used to move the screen for first 2 cm. The problem des not seem to increase and for the first time I thought its normal, but some time ago I saw an identical XPS without that problem.
Does yours have a plastic kind of film on the hinges? Can I peel this off? Why is it there?
View 3 Replies View RelatedI just purchased the Acer Aspire AS1410-2920 laptop from Newegg.com, and it arrived in the mail yesterday. I'm very much in love with this laptop, but I noticed right away that the hinges on it appear to be loose. If the laptop is sitting on my desk and I just use it like normal, it seems fine to me. But, the second I get up with it the display falls down (away from the keyboard area), and it did this while I rode my train into the office.
I contacted Newegg.com about doing a replacement via their online chat system, and of course they said I have to call them in order to get the RMA and UPS shipping label. Then, I have to ship the product back and I won't get a replacement for 7-10 business days AFTER they receive & process my return. Talk about a hassle but I suppose that's how it is anywhere you go. My biggest concern is that I may receive another new 1410 that has the exact same problem with loose hinges.
Has anyone here experienced loose hinges on their 1410?
Are the hinges on your 1410 nice and firm? I have a friend who has a smaller Acer netbook (9" screen), and the hinges on his are extremely firm in that there's no give if you shake it (not that I would shake my laptop on a regular basis).
Ive just got a new Sony AW Laptop so im wanting to get my sony vaio vgn-a115b repaired and sold as the right hinge is broken.
Would any A Series hinge work ?
As the title says I'm looking for some new parts.
I'm currently in need of new:
LCD hinges
fans
palm rest
mouse buttons
Anyone know the part numbers for these or could you reference me to a parts list or online site that would sell these parts?
the right hinge of my Acer Aspire 2003Wlmi & partner in job broke...
It seems that these items have been discontinued, so maybe some suppliers have that part in stock if i'm extremely lucky...
If you want any other pictures let me know. I know they're a bit blurry but the camera isn't cooperating on where it wants to focus.
View 10 Replies View RelatedSo I'm trying to upgrade my ram, right now I have 2Gb that the system sees, however when I crack open the back all I see is 1 slot that has 1 chip in it which is a 1GB chip...
Does anyone know where the other RAM slot is?..
why when i'm watching simple flash movies for more than 3 minutes in full screen my laptop gets real warm...the cpu gets crazy... 70 even 80c...?
View 4 Replies View RelatedI've had my Dell 1520 for 18 months now and had next to no problems but today I turned on my notebook and was presented with a "Found New Hardware" window claiming Windows needed to install driver software for my "Bluetooth Peripheral Device"
I click the "locate and install driver software (recommended)", it searches for the driver and then asks me to install from a disc...which i don't have. Then when I check for a "solution online" it tells me my Broadcom Bluetooth Device isn't compatible with Windows Vista, yet i've been using it perfectly fine for the past 18 months...Help!
I tried uninstalling the Widcomm software I got from the Dell Website, restarting and then re-installing but I still get 2 "Other devices - Bluetooth Peripheral Device" in the device manager and this never ending cycle of asking for a driver to be installed.
i am having some problems with my 1520 and i was wondering how to go about reformatting it back to "new"?
View 3 Replies View RelatedI read on the net there is an issue with Dell product breaking down and bad customer service. Also can anyone tell me can I play Directx10 games with medium setting on this notebook. How fast it is?
View 11 Replies View RelatedAfter rebooting I got an error message that I was missing hal.dll and that windows could not stat. Note: XP has been working great for about 8 months now.
I got this message after trying to boot in safe mode as well.
I put the XP installation disk in and went through the recovery process but no dice. It just loads up the dell logo then goes to a black screen but no more error message. I can hear the hard drive spinning.
There was a problem with my hard disk and dell was supposed to send me a new one. When it arrived, it came with a new processor.
I didn't realize that I had to install a new cpu but I've decided to anyway. To replace it, do I have to remove the enitre bottom casing of the laptop?
If I do, what is the best way to snap it out of place without breaking anything? Any help would be greatly appreciated.
I was thinking of trying to upgrade a couple of parts of my Dell 1520, namely the hard drive and cpu (i've been told the 8600M GT is the best graphics card the 1520 can handle?).
Now I don't have a clue about what processors I'm able to upgrade to whatsoever, so if anyone can stear me in the right direction that would be fantastic. My current Dell 1520 uses an Intel Core 2 Duo T7250 @ 2.0GHz if that helps at all?
As for the hard drive, is the "Western Digital 320GB 2.5" Hard Drive Scorpio Black SATAII 7200rpm" drive compatible? I think the 1520 uses SATA right?
Recently my fan has been making a lot of noise whenever it starts up.
Sometimes it sounds like it's getting caught on something as it spins and it trips for a few seconds. Other times it makes a high pitched, not particularly loud but noticeable, noise,
or it'll sound like it's blowing out a lot of air, usually more then it really is. It's also made a sort clicking sound before, similar to the noises a processor on a normal computer might make when loading or booting or something, but I know it's for sure coming from the fan
First of all I wanna say that I'm a new member on this site. I've checked it out a few times and it seems that people get good help and tips so I decided to register too.
Anyway I bought an inspiron 1520 right about 2 years ago. It's my first laptop and I havent had any troubles with it whatsoever and it's been surving me great.
However 2 years of wear and tear have taken its toll on the outside plastic cover of the computer. One of the corners is cracked (the one to the right of the volume and play/pause buttons) the metal part is a bit bent but it's nothing serious .......
A month after getting my new toshiba (insignature) and letting my sister being to use my old laptop because her 9 year old system decided to fail at life.. the computer decides to fail completely.
I have no idea what the issue is... The laptop will turn on, and turn on I mean the power light will come on for a second or two.. and then the light with go back out and the computer is completely off
I have an Inspiron 1520 with a GeForce 8600M GT graphics card.
I spilled some coke on it some time ago, and had to replace the keyboard, and also the media buttons don't work really well, so I purchased a new palmrest.
My problem is, that the TV-Out doesn't work anymore... although...it does work, in the way that I can figure out some image on the TV, but it's all black&white and flickering. Also, when Windows boots up, I can't see the "Welcome" screen, it's just black,
and suddenly the desktop appears with all the loading apps. It's 100% TV-Out related, because I recently reinstalled Windows, and it went just fine until I tried again the tv-out (which still did not work).
Yesterday I noticed that the machine had rebooted itself and was stuck at the green bar. I powered down and turned it on again, and got the "Windows did not start properly" screen.
I chose Safe Mode, but partway through the boot, it restarted again and went back to the same screen.
No matter what I choose I can't get Windows to boot.
So I then put the DVD in the machine and it would not boot from there. It went straight to booting from the hard drive with the same result.
I changed the boot sequence in the BIOS so that the DVD was first, and it still would not read from the DVD.
Giving up in disgust, I tried again several hours later. This time it would read off the DVD so I thought I was on the road to recovery.
But it still doesn't boot. Most of the time I am getting to a black screen with a large white cursor on it, and go no further.
One time, and one time only, I got as far as the menu you get when you start with the DVD, I chose repair my computer, and then it proceeded to sit there and do absolutely nothing again. [Note also - it took a very long time to go from the black screen to the Vista screen - way longer than normal]
So I now suspect a hardware failure. Hard Drive? RAM? I can on occasion see the hard drive light flashing for extended periods of time.
So I am contemplating between these two models but can't really decide. I like the real estate of the Vostro 1520 but the weight may be a problem. The 1320 is an option cause of it's battery life and weight. But at this point I am at a standstill...
So mainly, what are your opinions about these two macines..
Trying to find out what card i have internally, If it is B, g or n card.
I have a Linksys G router and will be upgrading to n.
Do all computers have to be on n to have the fast speed?
I'm having some problems with my charger. When I plug it in and turn the laptop on it says that it couldn't recognize the charger and won't charge, the laptop itself works, however. Sometimes it does charge, but rarely. I'm in a little hurry and didn't search thru the forum. Apologize if this issue was answered before.
View 9 Replies View RelatedI have an extra black keyboard for my 1520. Other than some keycaps being different, I dont see a difference in the keyboard itself. I'm assuming its the same keyboard ..
View 3 Replies View RelatedI just uploaded this video of my problem, you should be able to stream it, if anyone has any problems then let me know. And sorry for the quality, I only have a camera phone to hand, you should be able to see what happens anyway...hopefully
http://www.youtube.com/watch?v=z3dvfv8mT0E
Basically what happens is, I press the power on button of my machine, everything appears to be normal, the power LED turns on, the Hard drive activity LED flickers on and the DVD drive "clicks" (im sure some Dell owners know what I mean by this) BUT then all the lights go out (besides the power) and nothing is shown on my screen, no BIOS loading, nothing.
Does anyone know what might cause this?
I tried yesterday to get it to work but after about 7 hours I just gave up, nothing I did changed anything (I thought the CPU/GPU may of come unattached from the motherboard but after reseating them the problem was still there