I have a Dell 2408 monitor connected to my M6400 via the display port but there is no audio going thru to the built in speakers in the 2408? Has anybody been able to accomplish this. Is this an issue with the M6400's port not carrying audio...or the 2408 not able to pull the audio from the display port
I currently connect my desktop machine to my AV receiver through optical digita SPDIF.
If I use the two DVI ports on the E-Port Plus for two separate monitors, will the DisplayPort carry proper 5-channel audio?
Or, is the only audio output supported by the E-Port Plus the 2-channel, analog headphone port? I'd like to purchase the E-Port Plus with the Precision M4400 and output audio in this fashion.
I have a Latitide E6500 with the Nividia Quadro NVS160M graphics card. I'm running Vista Business 32bit. My E6500 vid outs are s-vga and displayport. I use my laptop mainly in my home office and I would like some more real estate, when in the office 1440x900 is just not enough. When looking at monitors displayport does not seem a common input but most have HDMI.
I then looked at monoprice and saw two possible options for displayport -> HDMI, an adapter or a cable. What is the difference between the two and which should I use if I want both audio and video signals transmitted? Or am I stuck using a monitor that has a displayport input?
I am about to be the owner of an M4400, and I am already the owner of a 2560x1600 monitor. So, the basic question is this - is it possible to connect the two (at full res) without a dock?
Dell only has single link (up to 1080p) DisplayPort to DVI adapters. However, some sites (e.g., here) do sell dual-link ones. I assume that the DisplayPort on the M4400 would have to support dual-link for that to work, though... Would the M4400 work with one of those?
On this laptop I have a DisplayPort output and a Thunderbolt output.
I have bought on the market an adapter (not from HP) from DisplayPort to HDMI. I cannot get the output displayed on my LED TV (full HD).
Could it be that the adapter supports only DisplayPort 1.1 and not 1.2?
If I want to see the screen on TV, shall I use the a DisplayPort adapter or Thunderbolt adapter? Is there any way to troubleshoot why I cannot display the output on TV from my laptop?
My MDP to Hdmi arrived today and works great on my Dell 24" however my Logitech Nano mouse would randomly become laggy like its losing signal causing the mouse pointer becomes jerky. Once I unplug the MDP the mouse works fine again.
i was wondering if Apple sell Mini DisplayPort to hdmi, i know there are 3rd party cables for Mini DisplayPort to hdmi but none of them support audio. Mini DisplayPort to hdmi cable that suppots audio?
I bought the Macbook Pro 13" on March 21st, couldn't wait for the refresh.
Now my question is, how do I connect to the external monitors, as in which Mini Displayport do I need to buy? I see a lot of displayports at Fry's for under $20 for Mac but don't know which part number exactly do I need for my MBP.
Another question is, I might want to get the Mini Displayport to DVI. Would DVI to HDMI work from the Apple Mini Displayport? Would DVI to VGA work from the Apple Mini Displayport also? I have alot of DVI to VGA/HDMI adapters so I was wondering would it work if I just bought the Mini Displayport to DVI.
Yesterday I bought a little 22" Vizio VW22L television to use as another monitor for my W530. I'm using this cable: [URL] to connect my computer to the TV. When I connected it at first it worked fine for about 45 minutes then I just got screen noise (short, multicolored vertical bars moving everywhere). Now whenever I try connecting it I get my computer's display on the TV for a couple minutes, then the screen noise again.
I was wondering what the issue is or could be. The cable seems to work fine. I tested it with a Magnavox television and a different Vizio TV. This TV's HDMI port also seems to work fine. I had my brother connect his Samsung Series 3 to it via HDMI and it ran perfectly well. The Lenovo update utility says all my drivers are up to date, as does Windows update.
I bought a Roline DP to HDMI cable hoping to be able to watch HD content in my livingroom and not having to plug an extra audio cable as DP should carry sound too.
When I do the same as on the youtube video, I get the following settings in the control panels: [URL] ....
But there's no sound coming out of the TV. I've tried it on my SyncMaster PC/TV Screen and on my Samsung TV in the living room. On the TV in the living room, the windows audio manager shows the device, but it cannot be selected as show above. It stays grey.
I've got a T420s with discrete nVidia Optimus graphics (Quadro NVS4200M). Driver version is 1.2.19.0 for nVidia HD-Audio and 8.17.12.6696 for NVS 4200M. This information comes from the device manager. I installed my system from scratch and used ThinkVantage System Update 4.
Where the problem comes from? I could only imagine that the cable isn't capable of carrying audio, but that seems rather illogic, does it?
I have just switched to Windows 7 Pro and it is already driving me crazy. I use a Lenovo X200 with my Ultrabase. I connect the notebook to an external display via DisplayPort. The Intel GM45 Graphics Driver crashes about twice a minute when the Notebook is docked and connected to the external screen. Than all screens become black and afterwards a message pops up, that says "Intel Graphics Accelerator for XP (R) stopped responding and has recovered". Sometimes the notebook crashes and reboots. That gets really annoying and I haven't found a solution. Bios Version is 3.20. I loaded the latest Intel Graphics Driver from the Lenovo Webpage (8.15.10.2302) with Windows 7 SP1 (all updates installed). When I use a standard windows driver and not the Intel driver the external display flickers black every minute once. The newest Intel driver (from the Intel Website) does not work, since it says that it is not released for my notebook.
I ordered new E6500 that came with Vista on it and I wiped that and have installed XP Pro SP2 on the machine. I have followed the guide on this page and installed everything in the correct order. The only thing that didn't install was the dial-up modem. It errored out and said "No MODEM device was found". Typically on the Latitude laptops I seem to remember installing the modem driver and it taking care of this entry in the device manager, but not this time.
There is a dial-up modem on the laptop and this is the only device that looks to not be installed. There is no webcam, WAN modem, or anything else like that.
Has problem with installing XP onto a E6500? Is the installer for the modem driver just bad or is there possibly something else going on.
The sound on my HP Pavilion G6-1a19wm is not working. Sound "does" work when using the audio jack with external speakers. I have tried uninstalling the driver, updating the driver, microsoft fix-it, and troublshooting steps. audio device shows in device manager and is supposedly working properly, mute is "not' enabled. visually all audio related things suggest that the audio is fine and troubleshooting finds no problems..
I have HP envy 15 j002er laptop. Originally I got it with Windows 8 but then I changed operation system to Windows 7 Pofessional (64-bit).I can`t install IDT high definition audio codec on it. I guess that is the reason why I don`t have and I can`t use Beats Audio interface on my laptop (only speakers are working). There are no audio drivers for Windows 7 available for download on HP website. When I`m cheking for driver updates via HP support, it proposes me only updates for Chipset, Graphics, Network, etc.And no Audio Driver..How can I solve it and install IDT high definition audio codec?
I have recently bought a new probook450 g2 but whenever i play a video or audio file an interrupt occurs like a buzz after fixed interval, I don't know what to do ......
HP Pavilion dv6-7030tx Entertainment Notebook PC Windows 7 Intel i7-3610QM CPU @2.3GHz 8Gb Ram
I have no audio. It has been previously working, but suddenly stopped. On the small speaker icon there is a red cross indicating "No Audio Output Device is enabled" When I log on to the computer i get a window that says "CWindowsSystem32AUDIOSES.DLL is not designed to run on Windows or it contains an error."
I have attempted to Troubleshoot but unable to get any sound. I have updated the Audio driver, but it is the up to date driver.
Device Manager: - Sound Video & Game Controllers
Bluetooth Hands free AudioCyberlink Webcam Virtual DriverIDT High Definition Audio CODECIntel Display Audio
I have followed the instructions in Testing for Hardware Failure on HP Support.
I recently bought a HP ENVY TouchSmart 15-j009wm which initially had windows 8, I installed a new O. S. Windows 8.1 64 bit and lost the driver pack for beats audio, I have been searching online for a download but cant seem to get a link to download.
when i hook up my second monitor useing the hdmi port and switch the monitor mode to extend the audio stops working. The volume mixer still shows audio movement but will not output the audio.
I am using HP 2000-2313TU Notebook PC laptop with windows 8 64 bit operating system. From the last few days i am facing some problems in audio..when i am opening my laptop the sound system is working well...but when i am not continuing any audio application( busy in some other work..) and after sometime say 20-30minutes when i am opening any audio or video file it is running without any sound..when i am restarting my computer again audio device works...if i am not using the audio files after opening my computer also this problem happens after sometimes when i play some audio files.
I have updated my HP Pavilion G6 2242sf to Windows 8.1 and the sound quality is not as good as in Windows 8 : In the Dolby control panel the equalizer works but switch the Dolby Advanced Audio checkbox has no effect so there is no more surround virtualization and the 3 effects "Movie", " Music", and "Voice" are not working anymore.Now my laptop speakers sounds choppy.
I downgraded from win 8 to win 7 with a clean install and although I have the sound workling I cant find the correct driver in other forum posts to get beats audio installed. Link to the correct download :
Also I would like to get the on screen volume indicator back.
After i installed windows 8.1 64 bit on my device, the audio beats control doesn't appear and i don't know if it's working properly or not, and i don't know if it's built in the original speakers.
My Device: HP Pavillion 15-p150ne OS: Windows 8.1 64 bit
I'm owning an ultrabook - HP SpectreXT 13-2106TU. No sounds coming out from my laptop for a few days now. I've tried troubleshooting - it says : IDT High Definition Audio CODEC has a driver problem.