Dell Latitude E6500 :: Audio Device On High Definition Audio Bus When Installing XP
Oct 14, 2008
I ordered new E6500 that came with Vista on it and I wiped that and have installed XP Pro SP2 on the machine. I have followed the guide on this page and installed everything in the correct order. The only thing that didn't install was the dial-up modem. It errored out and said "No MODEM device was found". Typically on the Latitude laptops I seem to remember installing the modem driver and it taking care of this entry in the device manager, but not this time.
There is a dial-up modem on the laptop and this is the only device that looks to not be installed. There is no webcam, WAN modem, or anything else like that.
Has problem with installing XP onto a E6500? Is the installer for the modem driver just bad or is there possibly something else going on.
I have an Inspiron 1720. When I purchased the laptop, it was on Windows Vista but with all of the head aches I've been getting while using Vista, I decided to switch back to XP. I got almost all drivers for my laptop except for the Modem Device on High Definition Audio Bus driver.
I have a Probook 4720s with Windows 7 Pro. Connecting my laptop to the TV with a HDMI cable worked fine then suddenly the next time I did this I had no sound and when I right click the sound Icon I noticed it read ATI High Definition Audio device not plugged in. It worked once and now it won't, I miss it. The driver is up to date.
I have HP envy 15 j002er laptop. Originally I got it with Windows 8 but then I changed operation system to Windows 7 Pofessional (64-bit).I can`t install IDT high definition audio codec on it. I guess that is the reason why I don`t have and I can`t use Beats Audio interface on my laptop (only speakers are working). There are no audio drivers for Windows 7 available for download on HP website. When I`m cheking for driver updates via HP support, it proposes me only updates for Chipset, Graphics, Network, etc.And no Audio Driver..How can I solve it and install IDT high definition audio codec?
I have a sony vaio Sz691N laptop and got windows 7 64 bits installed. The high definition audio controller is always disabled after restarting. I have to go to device manager to enable it every time. it is annoying me. Has anyone had the same problem before and has a solution?
For me, the issue is that sometimes on startup I get an error message that says the driver experienced an error and it closes and so I can't hear any audio out of my speakers until I restart. This happens randomly on some startups and today it happened when I opened iTunes for some reason.
I currently use driver version 6.10.6087.0 A which is what HP claims on their site is the latest version for my dv7t-1000.
I've read that some people use 6.10.6087.22.
And I just saw today that there is a 6.10.6087.60 C for the dv7t-2000.
My question is, can I use this new driver? How should I go about installing it?
Hopefully that works lol. I'll summarize in case it doesn't... or in case you don't want to read the whole thing. It's basically the typical, not-so-helpful, Microsoft Employee response... Nothing more needs to be said =P.
Basically... I upgraded to Windows 7 (64 bit, upgraded from Vista) on Tuesday. Started actually using my computer on Wednesday, and immediately noticed a lot of issues.
Biggest one was that Skype would freeze after using it for about 30 sec - 1 min. I would shut it down, restart the program, and it wouldn't start up (usually; if it would start up, it would freeze almost immediately after).
I eventually just ignored the issue, and continued using my computer. One time after this problem with Skype occurred, I tried to open Steam to try to play Battlefield: Bad Company 2, and steam wouldn't open .....
I have the following problem: Sony Vaio VGN-FW370J with Win Vista Home Premium 64 with Aptio Utility.
I do have realtek hd audio card and this card should have digital output. My gf has a toshiba satellite with the same card and she has it but I don't. I called sony and they replied (twice with different technicians) that this feature is not available on this model. Both audio cards have the same chip so I suspect that this feature is disabled hw.
It is not a driver problem. The driver does not install the Realtek Audio Manager so within the OS there is no way to enable it.
I am writing this new post after getting really frustrated from Googling all through the internet and not finding 1 decent solution.
I have a Dell Studio 1555 laptop and after bearing the pathetic sound quality both from the speakers and external speakers/headphones for months I finally decided to do something about it.
Apparently its not a hardware fault as everything seems to work technically fine but the sound output is really pathetic/high on treble and noise. Theres a word all around the internet that IDT High Definition Audio Codec sound drivers are bad idea and the default ones provided by Windows are much better.
Well i tried to remove, IDT Audio from my laptop permanently but to no avail. There is no option to remove at Add/Remove programs, so i went to Device manager and uninstalled the sound drivers. Upon restarting the PC the IDT audio popped backed in. So, I uninstalled once again and deleted the IDT folder but upon restarting it was back on again. Only that it took 5-6 minutes to install.
Can anyone suggest a way to remove IDT drivers permantly in Windows 7?
New Latitude E6510 running Win7 Pro 64 bit. Periodically the laptop will boot with a red X through the speaker icon in the tray. Placing the mouse cursor over the speaker icon displays a message something like "No audio device is installed. A cold boot does not correct the problem. Shutting down, disconnecting the power supply, removing the battery then restarting has corrected the problem so far.
HP Pavilion dv6-7030tx Entertainment Notebook PC Windows 7 Intel i7-3610QM CPU @2.3GHz 8Gb Ram
I have no audio. It has been previously working, but suddenly stopped. On the small speaker icon there is a red cross indicating "No Audio Output Device is enabled" When I log on to the computer i get a window that says "CWindowsSystem32AUDIOSES.DLL is not designed to run on Windows or it contains an error."
I have attempted to Troubleshoot but unable to get any sound. I have updated the Audio driver, but it is the up to date driver.
Device Manager: - Sound Video & Game Controllers
Bluetooth Hands free AudioCyberlink Webcam Virtual DriverIDT High Definition Audio CODECIntel Display Audio
I have followed the instructions in Testing for Hardware Failure on HP Support.
My computer is HP Compaq 7900p small. I bought new graphics card which is Asus AMD HD6450. When I test it I saw problem - no sound.
When I click on Sounds tab, I see that AMD HDMI Output-AMD High Definition Audio Device - not plugged in and I couldn't change it to default device. When I troubleshooted it, problem was that one or more audio devices isn't running.
I was searched in google for solution, and found it that I need to change in BIOS from DVI port to HDMI port, but in my comp BIOS version is 7.11 and I don't see where it would be changed.
Only what I did was that I swapped integrated audio to enabled then I get sound from my speakers, but AMD High Definition Audio Device still isn't plugged in. How to change it to default!
I bought a Latitude E6500 one year ago,I am planning to change the internal HD for a SSD HD to gain some speed; since my hardware knowledge is very scarce, I am planning to buy this SSD to host my GNU/Linux:
OCZ Agility-2 SandForce SSD.URL....But I don't even know if my latitude is, I quote, "SATA 2.6 Compliant, 3Gb/s and 1.5Gb/s support".BTW, is it difficult to open the laptop to change the hard disk?
I am trying to resolve a driver issue. I have an E6500 and after installing XP, patches, drivers and the like, I am left with one hardware device not found. It is listed within the Device Manager as "5880" and after some investigation it appears to be the Broadcom USH CV for a fingerprint reader. I do not have a fingerprint reader installed. I have extracted the drivers from another system and pointed the hardware wizard there but to no good effect.
Would either of these models be ok for mobile recording? It would most likely be audio and some VST instruments (BFD for example).
I currently use Nuendo with a Pcmcia interface (RME Multiface). These Dells are the last laptops I've found that still offer Pcmcia. Pcmcia interfaces still seem to offer better latency than firewire interfaces.
I also have a large external drive I'd like to connect via esata.
The price difference is pretty substantial between the M6400 and E6500. Stability and good performance are naturally most important. I'd like to have a 17 inch screen (M6400) but can compromise with a 15inch screen (E6500).
Not sure what is causing this. Maybe someone else who had this issue and solved it can help me out. This is NOT the same as the crackling issue (which is solved by the Intel Matrix Controller drivers).
I am running Vista Business using the IDT drivers from Dell website. No other software from Dell installed other than the Matrix Controller driver. I am playing in Winamp. But notice it happens in WMP also.
CPU is not stressed at all. I am running on the High Performance profile (clock shouldn't be modulated).
I have a Latitide E6500 with the Nividia Quadro NVS160M graphics card. I'm running Vista Business 32bit. My E6500 vid outs are s-vga and displayport. I use my laptop mainly in my home office and I would like some more real estate, when in the office 1440x900 is just not enough. When looking at monitors displayport does not seem a common input but most have HDMI.
I then looked at monoprice and saw two possible options for displayport -> HDMI, an adapter or a cable. What is the difference between the two and which should I use if I want both audio and video signals transmitted? Or am I stuck using a monitor that has a displayport input?
I want to know if my laptop is capable of playing hd dvd's
I've recently bought a dell studio 15. It's got a tsstcorp dvd +-rw ts-t633a ata, Radeon hd3400 and high definition sound devices..... yet I tried to play a hd dvd and the dvd player just kept ejecting the dvd and couldn't play it.
Hope someone can help here. Problem is that there is something wrong with my HDMI device. Firstly, when I plug the cable I have to restart the computer in order to recognize the external device. Once I restart I have picture on my TV from my laptop.
But there is no audio. Sound settings say there is no cable plugged. I tried everything, even re-installing win7. Initially when I bought the machine everything was working ok. But now it doesn't. I think that this started when a Dell guy replaced my screen.
Is it possible that this is something software/drivers based or the Dell guy did something bad on the hardware.
Yesterday I plugged in an HDMI cable to output to a Toshiba tv. After unplugging the cable I no longer have sound on my HP Envy 17 Notebook (this notebook has Beats Audio). The product # is EOK85UA#ABA.
My volume icon in the system try reads "No audio output device is installed." The audio device is not even recognized in the device manager (i.e. there is no yellow exclamation point or conflicted device to update a driver to). The system simply does not recognize the fact that a sound device exists.
I have tried many, many things: Fresh install (as per the sticky-guide) of Windows Vista x64 Home PremiumFresh recovery from system recovery partitionTried all versions of the drivers from the HP support page (Realtek and Conexant) --- I believe I have conexant, though.Safe mode driver installsDriver installs on a driver signing rebootPutting the computer into hibernate, then resuming (odd, I know.. I heard it worked sometiems).Made sure "Windows Audio" service is enabled in Administrative ToolsServicesInstalled Windows XP drivers for "Microsoft High Definition Audio controller"Flashed BIOS to most recent version F.32Updated chispet drivers to most recent nForce availableeInstalled Vista SP2 I'm sure there must be one or two more things that I've tried and just can't remember. I am running Windows Vista x64 Home Premium with SP1.