Do you know of any ?
Does the "PR01X D/Port Replicator" have the IEEE 1394?
I have a lot of videos on my camcorder that I would like to burn on dvds and do not think the usb is going to work.
Has anybody tried to put a Latitude d620 ATG lcd display cover on regular D620? This seems like a simple switch but I would like to hear your opinions.
View 3 Replies View Relatedtrying to control the fan speed. I've tried i8kfangui31 but still no luck. Then I run the diagnostic software from Dell Support website, the result of the processor on/off test is error code 3700:011B -> my fan failed to slow down to 2500rpm. the fan keeps running at high speed (about 4500rpm). my bios is A10.
View 10 Replies View RelatedI got this laptop second handed. At the time I got this laptop, there are 2 problems.
The first is, the 2 back USB port is gone, leaving only a hole at the body. I dont really got problem with this because I still got 2 side USB port.................................................
i recently bought a dell from craigslist a month or so ago and seemed to work fine, i recently installed ubuntu on it, i dont know if it has anything to do with my problem but anyways...
problem started when the laptop would shut off unexpectedly, but would start right back up fine.. i think it was due to overheating im not sure if the fan is working or not bcuz i hear no sounds coming from it. it showed a screen saying it shut down bcuz of it was getting too hot twice. i opened it up and checked for dust in the fan and cleaned it up. after it shut down about 3 or 4 times while using it, it wouldnt reboot. when i push the power button the three caps lock, number lock, and scroll lock will flash as does the power light then it will shut back down. occasionally it will boot and make it as far as the desktop screen then the screen will go black, but the lights will still be on as if the computer is still running, and i will have to hold the power button down to get it to turn off.
one thing i have noticed is that with the hard drive in the laptop it will make a beep noise then shutdown, if the hard drive is out it will shut down with no noise.
i have tried everything, i have reseated the ddr memory and tried running off just the power cable or just the battery with no success.
I have a Dell Latitude D620, purchased used from ebay.
Mobo: HAL00 LA-2791P Rev1.0 (A00) BIOS updated to current (ver.A10)
Running Windows7. So far, runs OK, but I wanted more RAM than the 1GB it had. Also put in larger HDD (320GB).
I have owned a Dell Latitude D620 for the last few years. Lately, i have realized that my 9-cell battery is only charging to 84% (4 weeks old), and it only gets about 1.50 hours on full charge.
Also, at random intervals, the LCD screen flickers and becomes blurry. All settings are default and there have been no modifications, here is my computer information.
Dell Latitude D620
Intel Core 2 Duo T7200 2.0GHz
2GB RAM
256MB Video Memory (nVIDIA Quadro 110)
Microsoft Windows XP Professional Service Pack 3 .....
Question, I have both a Latitdue D620 which I upgraded the RAM to 4G and the Hard drive to 320G. But I also have an Inspiron E1505 with 2g of RAM.
I want to give one of my laptops to my father because he doesn't have money to purchase a new one. Which one should I give to him? I really like both laptops. please give me your honest opinion.
First want to say hi since this is my first post here, been a Thinkpad user for years(a regular member on thinkpad forums) but it died last week so I picked up a very nice D620 last night. So from now on you'll be seeing a lot of me here
I got a great deal on a D620 w/2Ghz Intel Core Duo & 2gb of DDR2 ram,
it's coming with XP Pro but I've been running Windows 7 here on my Dell Desktop since around February(RC/beta version then bought Ultimate version when it was released) and I have to say I like it a lot and would love to install it on the D620 when it comes,
has anyone here installed Windows 7 on their D620 and if so and have any driver problems or issues of any kind??
Thanks in advance and sure nice to be here...
I have a Dell Latitude D620 and I replaced the battery about a year ago. Now the Power Meter reads that the battery is connected and is charging but if I unplug the power,
the laptop immediately shuts off. It seems like the connection may not be good, but I have checked it several times and it looks fine.
A user of mine reported a problem with her screen being black. You can actually see the windows logon prompt but its really dark.
I set her up on a port replicator with an external monitor, which displays fine. So is it the display on the laptop monitor thats causing the problem? Its a Dell Latitude D620 noteboob
I bought a D620 a while back and added complete care since I travel a lot.
About a month ago the computer was involved in an accident and was completely destroyed.
Today I got the word that my D620 most probably would be replaced by the E5400.
My laptop (Latitude D620) is driving me..How do I turn off the touchpad and disable the top row (between touchpad and spacebar) of mouse buttons? When ever I'm in Word, or composing an email, the cursor moves up into previously typed text and starts typing from there instead of where I was at. I suspect it is the touchpad or the 'mouse' buttons between the touchpad and the space bar. On a ThinkPad there was way to turn off the touchpad, but still leave the joystick/pointer enabled. But I need to also disable the top row of mouse buttons.
In other words what I want is a set up where the joystick/pointer works and the bottom row (below the touchpad) of mouse buttons works, but not the touch pad itself, or the top row of buttons.It sounds funny, but it has become a severe productivity issue. The cursor jumping has happened 7 times just in this one email !!
When I unplug the charger, the laptop returns to normal speed. Does anyone know the reason why this is occurring and if it can be fixed?
Also, I don't think the laptop is actually charging
In the task manager I see the CPU usage at around 20% when its not plugged in, and the moment I plug it in, it goes to 100%, then I unplug it and it instantly goes back to 20%.
I had never thought too much about the temperature in my laptop averaging about 134F (57C), but after I upgraded my desktop to an E6700 and it was running at about 86F (30C), I figured I'd take a second look at my laptop
View 4 Replies View RelatedI recently upgraded my Latitude D620 to windows 7 and now can't disable my touchpad. I've tried just about everything to disable it but have been unsuccessful.
View 2 Replies View RelatedMy latitude d620 screen goes black if i have the charger hooked up and i move it it doesnt do this if i move it on battery and i hooked it up to a monitor and the video went off on there too when i moved it.
View 3 Replies View RelatedI reinstalled my D620 from scratch (ie. formatted the disk) and reinstalled from the Dell supplied XP Pro media CD. I downloaded and installed all the relevant drivers. I have Intel wireless working, the nVidia card working at 1440x900 etc ... However, I can't seem to get the power/battery management to work. The D620 shows its battery light as green when the AC power is plugged in and the physical battery button lights up all the LEDs when pressed when the battery is partially/fully charged but neither the BIOS nor XP Pro recognize the battery.
Similarly, when the AC power is disconnected the battery works fine by itself for x hours but the power cord icon remains in the the taskbar and the battery light on the laptop glows orange as soon as the power is cord is disconnected. The LEDs on the battery itself however light up when the button is pressed on the physical battery. On reboot the BIOS also does not recognize there is a battery present and not does XP Pro.
In other words, everything works as expected of a laptop - except when totally wireless, how much juice/time I have left in the battery - this is fundamental to any portable device.
A few hours prior to the reinstall both XP Pro and the BIOS recognized the battery no problem and worked accurately and without fault - so I refuse to believe this is a bad battery. Somewhere there must be a driver to enable the BIOS and XP to recognize the battery ?
The battery works and both XP Pro and the BIOS were well aware of its existence prior to the reinstall a couple of hours earlier. All I did was to format the hard drive and initiate a totally fresh install of XP Pro - and installed the drivers downloaded from Dell based on the Service tag of the D620.
I arrange of one latitude D620. I have not the access to be able to modify things as the startup of the system in the first one on the CD-ROM because I do not know any more the Admin password. What is the default admin password account of one latitude d620. Either how can i make to cancel the former admin password?
View 9 Replies View RelatedFor me it happens when I shut the laptop screen and open it again right away. If I wait a few beats before I open it, the screen lights up again just fine.
But if I open it right away after closing it, the screen goes blank, though the laptop seems to be running just fine.
Hitting Fn-CRT/LCD does nothing, nor do any other of the function keys.
I even tried hooking up an external monitor and banging away at the CRT/LCD combo, but the external monitor is just as blank as the laptop LCD.
Hard power-down will restart the laptop and the screen comes back fine, but you've lost any unsaved work .....
I have an old Dell Latitude D620 which is on its last legs.I want to wipe everything off it so I can get rid of it safely. The Internet tells me to press F8 on start up then go into Repair your Computer but I don't have this option on the menu. Other searches say to insert the start up CD but I cant find this anywhere.I am running Windows XP.
View 3 Replies View RelatedI have a D620 Latitude. Two days ago I had it on stand-by mode and I restart it. The screen was blurry/offset with pink lines appearing in certain blueish areas. I saw also that there was a message coming out of the notification area at the bottom right saying that the virtual memory was low. To make you understand what I mean by offset, when I right the letter "I" I can see a ghosting effect with a second "I" appearing next it. So what I see is almost an "II". It is as if 50% of the pixel information are tranferred to a few pixels to the left or right.
OK so I did my search and found the DELL support [URL] .....
I checked and updated the drivers to the proposed (BIOS to A08 and NVIDIA to A10) but nothing.I then had a look at the BIOS and I could see also some distortion. I guess that means that there are hardware issues. I then run the diagnostics on the BIOS and it gave me two errors DST 1000-1046 which I guess it means that there is some sort of driver issue. I run the chdsk /f and it found no errors to fix. So am stiull trying to understand if this is a hardware or software issue. I have not yet the wire to make the connection to another display. I saw an article on the web from someone who made a change in a .inf file of NVIDIA claiming that this blurring/offset is because of missing information in the NVIDIA .inf file.
Whenever I connect AC adapter, display on my laptop goes black and it remians black even after I remove adapter. If I poweroff laptop while adapter connected and power on it again, the lights on keyborad just blinks and it shuts down. If I remove adapter and turn it on then it works fine.If I connect adapter while laptop is powered off then it charges the battery as usual .
View 3 Replies View RelatedI bought a new docking station to improve my workplace at home. Unfortunately I wasn't able to start a system because of warning during a booting sequence : "The AC power adapter type cannot be determined. Your system will operate slower and the battery will not charge....etc". After that waring the only possible action is pressing F1 button to shutdown a system.I connect an AC adapter directly without a docking station, a system started properly.
View 3 Replies View RelatedI've had my laptop since 2011. Whenever I would press the number 7 key it would repeat endlessly. Also, now when I press a key in the row beneath the numbers row, the 7 repeats itself all across my screen. What could be the problem. Is there a way for me to adjust this problem?
View 1 Replies View RelatedI have a Dell Latitude D620 and lately the screen has been doing weird things. The images will show up pixelated or of a low quality. I plugged my monitor into the VGA port at the back and it shows up fine on my monitor. I just want to know if it's the video card or screen before I buy a new screen.
Uploaded below are pics of the problem.
My D620 suddenly stopped working with an AC adaptor, won't charge the battery, won't operate without the battery. I have several AC adaptors and none of them work now. However, when docked the ac works fine and the battery charges with no issue.
View 4 Replies View Relatedall I got a new E6410 and 2 docking stations around a month ago.The problem I have is that when the notebook is in my office docking station it is really really slow.I can watch while window contents are draw, switching messages inthugnerbird takes a couple of seconds.In the home dokcing station everything is fine.
View 15 Replies View RelatedWe have a user whose Latitude E7240 shuts down every time she tries to dock or undock her laptop. We have replaced the motherboard and both docks that she uses. The problem disappeared after she worked, undocked, several days from home. She returned to work and was able to dock/ undock with no issues. I have another motherboard, and can replace again, but not sure that the motherboard is the issue.
View 1 Replies View RelatedWe have an unusual problem with a Dell Latitude E5520. It has been built with Windows 7 32bit SP1 and McAfee EndPoint Encryption, as we do with all of our laptops.
When the laptop is powered on and then docked, everything works fine. If you then give the laptop a restart whilst docked, it just doesn't! It shuts down and stays in some kind of power save mode. I have been through all of the Power options, including closing of the lid and turned off everything that could be causing this to happen, but still nothing.
If the power button is pressed whilst docked, the light comes on but that's it, no activity. Undock it, power up, close the lid and dock it again, all of the external screen, keyboard and mouse work as you would expect. I believe all of the drivers are up to date (it is a new laptop).
The docking station is an E-Port Plus DP/N: FFCV6 A00