I have a 160GB 7200RPM with Free Fall Sensor harddrive and the unstoppable clicking of my Seagate hard drive is driving me nuts. so I have three choices:
I have my 160GB Hitachi 7200 RPM Hardderive from my old system that i can strip off before is end back to dell. This hd does not have free fall sensor.
They are sending me a Fujitsu 160GB 7200 RPM one that has FFS.
Intel� Core� 2 Duo Processor T8300 (2.4GHz/800Mhz FSB, 3MB Cache)
4GB Shared Dual Channel DDR2 SDRAM at 667MHz (2 Dimms)
High Resolution, glossy widescreen 15.4 inch LED LCD
256MB NVIDIA� GeForce� 8600M GT
320GB 5400rpm SATA Hard Drive
Yesterday I ordered this Computer. I have been reading a few posts about the 7200RPM Hard drive and decided to look at my order to see if this was an option. It seems today the computer is 100.00 cheaper and there are more options. [I ordered through a Dell partner purchase program so the options were a bit different then the regular site]
I would like to know which is better :
Full Hi Definition, glossy widescreen 15.4 inch LCD (1920x1200) & 2.0 M
I just purchased a HITACHI Travelstar 7K200 200gb 16mb cache hard drive for my 1710 from ZipZoomfly.com for $233.00 with 2 day shipping if anyone is interested, that was the best price I could find.
View 15 Replies View RelatedSo i bought a Seagate 250gig hard drive for my d600 and i cant seem to make it work.
It reads after the dell symbol comes up and then it says that there is no primary drives found and no bootable devices found.
And when i try to run the diagnostic it says the same thing. What am i doing wrong?
I bought the hard drive from Office Depot and the guy didnt tell me about any drivers that i needed to buy or anything.
I just bought a Hitachi bulk data encryption, but unfortunately I don't have hdd password feature in bios.
Is there any possibility to upgrade bios with this option or install the ata security feature?
I recently purchased a Hitachi 7k200 200GB hard drive and used the trial version of Acronis True Image to transfer the image of my old drive to the new one. It all seemed to work fine, but today I was going to use GParted liveCD to delete my Vista partition, and saw that the drive only showed a size of 110GB. It had been showing 186GB before today. I checked the size on Acronis, and it said the size was 110GB as well.
why it is doing this? 70GB of unallocated space can't just disappear. How can I get my system to recognize the full size of the drive again?
I was messing around some this morning with reinstalling Dell's Media Direct, could that have caused it?
Hadn't seen this posted yet:
Dell releases firmware update to fix "clicking noise" on Seagate hard drives
how does teh Sony Z compare to the Fujitsu LifeBook S760 Notebook
View 5 Replies View RelatedThese babies are now starting to appear in the retail channels.
I ordered one from here. Scheduled for delivery tomorrow...
Using my inspiron 2330 (only 18mths old ) as normal next thing it tells me it encountered fault and has to reboot anyway it keeps saying scanning and repairing drive (c) then does not allow me to log in so i manage to get into bios to do a scan and it guves me a error code of 2000-0142 validation code of 112406 and and then says harddrive 0-s/n wd-wmc152946178
When i finally manage to log in my desk top screen is flashing and keeps telling my hard drive fault ....
Something recently happened to my laptop, and now whenever I boot up my laptop, I get a message stating that "No drive detected", and I don't know if the hard drive might be damaged or not.
I tried connecting the hard drive directly to a desktop pc since it's a sata hard drive, but my desktop pc just froze on the boot screen whenever this hard drive was connected.
I also was going to try and use a hard drive external case to maybe connect it to the pc this way, but I wasn't sure if it would work
I'm thinking of removing my DVD drive and replacing it with a caddy and hard drive as explained here.
I don't use the DVD drive very often and would much prefer a 500GB or 1TB hard drive in there. The DVD drive can then be used externally via the eSATA port using this cable.
The ideal solution would be to use this NewmodeUS caddy as it supports the larger 12.7mm 1TB 2.5" hard drives and has a removable faceplate. The problem is the price.
At $55 including postage to the UK plus customs, VAT and clearance fees on top it's going to work out pretty expensive for what is essentially a slimline SATA to SATA extension
I hate for this to be my first post, but after looking everywhere on the internet and on this site (I've been lurking a while) I'm still at the same place I started with my Studio 15 laptop. I'll try to include as much detail as possible.
I had my laptop plugged into my LCD tv via an HDMI cable as I often do, and when I went to close the laptop to use just the LCD, the tv flashed, showed a blue screen of death for a quick second and then went black. I opened the laptop and it was still on, but the screen wouldn't go on.
I restarted my computer and from there on out it kept making a beeping noise and stalling for a really long time at the "Dell Studio/progress bar" screen. After leaving it at that screen for a while the clicking stop and then it allowed me to access the Boot Options and Setup. Under setup, when I click on the drive under SATA hard drive, it shows something like 10GB and nothing more, and I have no options on the screen .....
I have HP Pavilion g6-2301AX laptop, which has Hitachi HTS545050A7E380 500GB 5400RPM HDD.
However, I am planning to upgrade my laptop to Hitachi Hitachi HTS721010A9E630 1TB 7200RPM HDD.
My question is, whether this HDD supported by my laptop?
I'm upgrading my XPS m1530 CPU, i figured I'd post in this section.
Anyhow currently I'm running the t5750, 2000MHz dual core, with 2mb cache.
Ive got 2 choices for my upgrade (and I know they both will work for sure in the XPS m1530 as I've asked around) and here they are:
The T8300 with 2.4GHz dual core and 3mb cache and 800 bus speed, or
The T9500 with 2.6GHz dual core and 6mb cache and 800 bus speed.
Since I'm in Canada, the only good prices i can find are on eBay (otherwise I'm buying via Canadian newegg and whatnot, and they charge A-LOT for Canadians because of import and CAD currency exchanges).
The T8300 is listed at 173.56 CAD with +25$ Australian for shipping, which ends up being around 24 ish CAD, which means I'm paying roughly 200$ CAD for it.
The t9500 is listed at 253.56 CAD with free shipping to Canada.
In the end, my question is this: is the +0.2GHz/core and the 3mb extra cache worth the 50$ (considering the t9500 can go upwards of 350 on newegg Canadian, or rather used to, its not even listed there anymore). Although it may not be worth the straight upgrade, it may be worth the time i'll put off upgrading or buying a new laptop. What are your opinions?
the t9500 expires in 9 hours, and although I've been tracking the user since September, hes always re-posted the listing, but I don't know if the price will change a lot (its gone up 10$ since the previous re-post) so speedy answers would be .
I'm trying to decide which processor and OS (Vista 32 or 64) to go with. The quad cores are 2.5Ghz I believe, and I just haven't seen anything showing an advantage for quad cores outside of 3D rendering applications. Anyone have some good hard information on this? For my personal situation, I plan to use the notebook for the following:
App Dev using Visual Studio 08, SQL 05 & 08, Expression
Design/Illustration/Photo using CS3 tools, eventually CS4, Lightroom, rare 3D in Blender.
Gaming to include Farcry, WoW, Neverwinternights, others?
Right now it seems that the quad core will draw more power for almost no performance increase, and in some cases it will perform *worse* than the core duo at a higher clock (say, T9600). I'm not sure how far into the future it will be before a 2.5ghz quad can outperform a 2.8ghz duo in most use cases? Anyone?
On the OS, how are people feeling about 64bit? For all my day to day involvement in the "latest and greatest" in software dev, I still haven't made the move to 64bit.
TIA, and would this question be better in a different forum?
I got to build a Dell comptuer. I have almsot no choice but for ram and processor.
Every model has only one choice for GPU. Why? It use to be you could build a computer you wanted. Now if you want dedicated GPU you have to go to a Studio and pay 200 bucks more? And if you want a non-suck GPU you have to go to a XPS and pay another 200 bucks.
What happened to modability.. what happened to choice and quality at Dell?
I got to HP and i can choose to get integrated graphics or upgrade to dedicated... why did Dell move away from this? And move into ... if you want this upgrade to a new model and pay 4 times more...
HP Pavilion Dv5-2077cl Entertainment NotebookProduct #: WQ799UA#ABAWindows 7 64-bit
I have been getting a random blue screen popping up every once and a while, that will "dump my physical memory" or something and then reboot itself after like 30 seconds. my hard drive was the reason for these constant errors. So I backed everything up, in preparation of a real crash. I am in the process of ordering a new hard drive from Newegg.com, and I would like to know if it is hard to replace a hard drive in a notebook, or if I should have Geek Squad do it for $50. Also, I dont think I have the Operating system disc that came with my computer, so how do I order that from HP and how much is it?And last but not least, Is there a post or video with instructions on how to install a hard drive and the operating system?
I have a HP 15 Notebook PC with no dvd drive recently I was sent the system recovery cds from HP. I dont have an external dvd drive. What i do have is a Toshiba Satelight laptop with Widows 7 and a good dvd drive. Also I have a 500 GB external hard drive. I was thinking maybe I could copy the disks onto the external harddrive with the Toshiba dvd drive. Then attach the external hard drive to my HP 15 Notebook by usb port and install Hp recovey disks from the external hard drive.
View 2 Replies View RelatedLaptop is an Acer Aspire 1640. 2.26GHz, 2gb RAM.
Laptop was working fine with the factory Hitachi HTS541680J9AT00 80gb drive.
I purchased a Samsung HM160HC 160gb drive as it's supposed to be the fastest PATA laptop drive available.
I put it in and the laptop just kept saying "no operating system found" with the XP disk in the drive.
I tried several optical drives and got the same issue with all of them.
I then hooked a USB optical drive up and it wouldn't boot from it.
I removed the internal optical drive and the system then booted from the USB drive and loaded Windows fine.
I just assumed it was a fluke and once Windows was done loading I removed the USB drive, installed the factory internal optical again and turned it on...
"No operating system found".
This is where I'm stuck. If I remove the optical the system boots into Windows fine. There were no issues like this with the other hard drive.
I have tried setting the hard drive as Master, Slave, and Cable Select with no change.
Laptop has the newest BIOS.
Samsung does not offer firmware updates on their hard drives.
who opened I believe Z and connected a hard drive to dvd drive connector while leaving dvd drive in for cosmetic reasons. Can't find this thread. Where exactly can the hard drive go? Inside the tray?
I am afraid there will be too much vibration if I put regular HD there. For this reason I would rather put there SSD but is there a way to make this a primary OS drive? Seems like last bios allows to boot from optical drive.
I'm very close to buying a Latitude E6400 or E6500, but I have a few questions before I pull the trigger. I'm hoping that a few E6400 and E6500 users can help me out...
1- Displays- are they all matte finish or ??? If I go with the E6500, I definitely want the WXGA+ (1440x900) LED-backlit option, but I'm thinking WXGA or WXGA+ (LED-backlit) will do on the smaller E6400.
2- Color choices- I know that Regal Red and Regatta Blue are offered in addition the standard Brushed Metal Black finish. Other than the tiny photos shown on the Product Details page as representations of each color, I can't seem to find any larger photos of the Red or Blue models! Is it a glossy or more of a matte/flat finish.....or should I just stick with the Brushed Metal Black?
3- Which size- 14.1" (E6400) or 15.4" (E6500)? The lighter weight and smaller dimensions of the E6400 are very appealing. I'm just wondering if there are any significant benefits that the E6500 would provide over the E6400 (other than the availability of a WUXGA display)?
4- Thermal Management- The reviews I've seen were models with the P8400 processor and integrated graphics. Heat management was very good on those configurations. Does that hold true for models wity T9400/T9600 processsor and the nVIDIA graphics card? Is fan noise ever a problem?
I have decided on the HP DV3. I have 3 battery choices, 6 cell, high capacity 6 cell and 9 cell.
I know the 9 cell sticks out - it's also supposed to last 7 hours. What about the 6 cells? How long does each last because I am not sure if I want the 9, high capacity 6 or the option of getting both...
I got the P7535 and integrated graphics.
I recently got a dv7 (17.3") and I've been looking around for a good notebook cooler. The current cooler is not for this size and was wondering for any options available out there.
I've heard of the the Zalman-NC2000 but I'd have to "reposition" it to use it's capabilities. My next option would be the "NZXT Cryo LX". I am considering getting this one but would like to have other alternatives before I commit to it.
I use this laptop for gaming and photo/video editing so portability would be a plus.
Also, any good messenger bags for my lappy? I'll need space for my cooler and wacom tablet. I've been looking around for a long time as this and some were just a tad "tight" fitting in.
I have installed new Seagate firmware DE 17 for HDD with 7200.3 RPM and WEI drop down from 5,9 to 5.8
But HD tune reports still the same tests results.
Do u think that this firmware could cause performance digression.
So I've decided to upgrade from the 5400RPM WD HDD that came with my M1530 to either of the two:
Seagate Momentus 7200RPM 320GB 16MB Cache
http://www.newegg.com/Product/Produc...82E16822148336
WD Black Scorpio 7200RPM 320GB 16MB Cache
http://www.newegg.com/Product/Produc...82E16822136280
From what I've researched, the Seagate HDD is faster and consumes less power, but I've always been a WD fan and have had multiple reliable products from them. I was wondering if anyone had their own perspective on the HDDs that they upgraded on their M1530.
I am thinking about getting a new DV4T and then upgrading the hard drive to an X-25 ssd, but obviously it'll only be 80GB which is an issue. I just read the NBR review of the DV4 and it seems that there is a special hard drive you can plug in into the optical drive bay to boost your storage space... i've been searching everywhere but I can't find the thing... anyone know where/if this thing does in fact exist and if it's compatible with the "new" DV4s?
View 4 Replies View RelatedI've bought E6400 equipped with Seagate hard drive 250GB 7200rpm, model ST9250410ASG (free fall sensor). Unfortunetly this hdd has a "clicking noise" problem.
I've seen new firmware update on dell's support page, but it's not for this model. Is there any way to get rid of clicking?
I tried installing the R206231 Firmware update from Dell for the Seagate drives listed on the support site and it would not complete. I get an error. I noticed that my firmware is DEA2. Is this a newer firmware than the fix is trying to update to? I noticed that the software is trying to upgrade to DE16.
I own a ST9250421ASG in a E6400.
I have a Dell Inspiron 1545 and I want to upgrade my hard disk. I am thinking to buy a Seagate Constellation 500gb but I am not sure if it is compatible with my laptop.
I read somewhere that it is a SAS drive and that you need a compatible motherboard in order to use it, but I couldn't find anything else. Here is a link to the drives webpage.