I have a Dell Latitude D600 that came with a 60gb hard drive. I had a D600 previous to this one with a 40gb hard drive and I swapped this hard drive into the newer D600 since I had all my important data stored on it already.
Just the other day when I was performing some maintenance on the D600,
I accidentally dropped the 40gb on the floor when it was out of the computer. I thought everything was fine because it seemed to boot up when
I re-installed it, but I hadn't actually tried using it until today
I have a 160GB 7200RPM with Free Fall Sensor harddrive and the unstoppable clicking of my Seagate hard drive is driving me nuts. so I have three choices:
I have my 160GB Hitachi 7200 RPM Hardderive from my old system that i can strip off before is end back to dell. This hd does not have free fall sensor.
They are sending me a Fujitsu 160GB 7200 RPM one that has FFS.
HP Pavilion Dv5-2077cl Entertainment NotebookProduct #: WQ799UA#ABAWindows 7 64-bit
I have been getting a random blue screen popping up every once and a while, that will "dump my physical memory" or something and then reboot itself after like 30 seconds. my hard drive was the reason for these constant errors. So I backed everything up, in preparation of a real crash. I am in the process of ordering a new hard drive from Newegg.com, and I would like to know if it is hard to replace a hard drive in a notebook, or if I should have Geek Squad do it for $50. Also, I dont think I have the Operating system disc that came with my computer, so how do I order that from HP and how much is it?And last but not least, Is there a post or video with instructions on how to install a hard drive and the operating system?
My hard drive failed on my Inspiron 14z laptop. I ordered an exact replacement and installed it. The computer was purchased 2 1/2 years ago, and I downloaded the operating system on 4 DVDs per Dell instructions. After installing the new hard drive, I am downloading the 1st DVD. I come to a page that asks me to either click on "Restore my computer" or "Factory Recovery - Deletes data & resets all partitions". I click on Factory Recovery, hit next, and a new page comes up saying this application will recover your drive to the factory condition. "Do you confirm?" I click "yes", hit next, and I get yellow triangle with an explanation mark inside and it says "Your hard drive size is not supported for this process. Please use a hard drive at least GB in size.
i just bought my hp hdx 16 yesterday the main reason i choosed hdx 16 over dv6 is the second hard drive option(as said in maintenance guide) now i opened the back and no place for my second hard drive if any1 knows where the connector
My Macbook is coming in tomorrow, but I've already got a new hard drive that I'm planning to install on it. How do I install the OS onto the new drive? Do I just assemble the new drive in and put the CD that comes with the Macbook in and it'll do everything for me?
i just bought my hp hdx 16 yesterday the main reason i choosed hdx 16 over dv6 is the second hard drive option(as said in the maintenance manual) now i opened the back and no place for my second hard drive
I had to install a new hard drive onto Dell Inspiron 17R (5720, Mid 2012). Ordered new hard drive from Dell, and also Operating System reinstall DVD. Windows was loading, but computer shut down and did not restart. I pressed the power button to restart, but now get 'BOOT MGR is missing' error, and don't know what to do next. I chose 'Custom Installation' and selected the only hard drive that was visible when prompted. Computer will not restart with DVD or without DVD. What now? Windows 7-
I have a Dell Latitude E6330 laptop and I recently replaced my hard drive as my old one had died--this was confirmed by the IT department at my school. After replacing the hard drive on my laptop, I found that the Fn+F5 command to disable my touchpad/touch stick was unresponsive. Upon further inspection, the touchpad button on my system tray was gone, and all touchpad related functions of my laptop were gone. In place of my touchpad (and all windows, settings, options, etc. ... that concerned it) was this ps/2 compatible mouse, which I am not allowed to disable.
I am a gamer and a student, and having my touchpad/touch stick enabled hinders my ability to type or play games as easily as I am used to due to misclicks. I used to be able to set my laptop to disable my touchpad (and other related hardware) automatically when I plugged in a USB mouse, and I would like to return to this setting if possible. How to do this without disabling the touchpad in the BIOS (as I do need to use my touchpad during lectures) ...
I have to swap out the current hard drive on my old Power Mac G5 because it's become unreadable. I've decided on the hard drive to replace it, but I have no idea how to go about installing the operating system. Moreover, my Power Mac G5 came with 10.3.5 Tiger, so is it safe to upgrade to Leopard even if I have older components?
I just got a new 640GB hard drive, and plan to install OS X, Windows XP, and Ubuntu on it. I would like some guides and recommendations on which operating system to stalled first, and what other preparation/softwares I need to get before installing.
I have a system hp pavilion dv4 2101tu. My 320 GB internal hard drive got corrupted and i just bought 500GB new wd black internal hard drive. the problem is that when i am going to install window , i am facing problem . Just tell me that is there any prerequisite for installing a new hard drive into laptop. How to update bios information where it's shows i.e. internal hard disk size is 320 GB.
I have an HP Pavillion dv6000 notebook with a hard drive that is partitioned. One partition contains the recovery program, which will install Windows XP should I ever need it to do so. I have recently installed Windows 7 on the other partition, and believe it would make sense to install Windows 7 on the recovery partition, so that if it is ever needed, it would reinstall Windows 7 rather than Windows XP. How can I accomplish this?
I have Acer Aspire 5742G notebook and I'm having problems installing the Windows 7 OS on my new SSD hard drive (I bought the SSD because the original hard drive is failing and making blue screens all the time...)For the factory restore, I'm using restore discs. I burned the discs few years back when the laptop insisted me of doing it (by using eRecovery or something, 3 dvds total).
The computer tries to install the OS with the dvds (asks to insert a dvd and then press a key). The actual problem is that the installer is just going in loops, restarting and eventually freezing in the end.. Reboot -> Acer logo -> Windows is loading files... -> Starting windows -> Reboot -> etc.That kept going for more than a hour (on the first dvd!) and suddenly it just froze on the "starting windows" screen.. So I had to reboot and star over again.I can still use my old formatted HDD, should I make new set of recovery discs or use an USB drive?
I have a HP Envy 4 - 1046tx Ultrabook and the operating system is Windows 8.1 64-bit. While downgrading to Windows 7 64 bit I was unable to find the hard drives. In the installation screen it showed me "No drives were found. Click Load Driver to provide a mass storage driver for installation.".
I downloaded all the versions (from latest to the oldest) of Intel Rapid Storage Technology drivers and tried installing them one by one but they didn't work and still the hard drives aren't visible. But if I use a Windows 8 installation disc and install the driver the hard drives are visible.
I need my computer to display the hard drives by default without requiring a SATA driver. How do I do that? My chipset manufacturer is Intel and the model is Ivy Bridge HM77.
Using my inspiron 2330 (only 18mths old ) as normal next thing it tells me it encountered fault and has to reboot anyway it keeps saying scanning and repairing drive (c) then does not allow me to log in so i manage to get into bios to do a scan and it guves me a error code of 2000-0142 validation code of 112406 and and then says harddrive 0-s/n wd-wmc152946178
When i finally manage to log in my desk top screen is flashing and keeps telling my hard drive fault ....
Something recently happened to my laptop, and now whenever I boot up my laptop, I get a message stating that "No drive detected", and I don't know if the hard drive might be damaged or not.
I tried connecting the hard drive directly to a desktop pc since it's a sata hard drive, but my desktop pc just froze on the boot screen whenever this hard drive was connected.
I also was going to try and use a hard drive external case to maybe connect it to the pc this way, but I wasn't sure if it would work
I'm thinking of removing my DVD drive and replacing it with a caddy and hard drive as explained here.
I don't use the DVD drive very often and would much prefer a 500GB or 1TB hard drive in there. The DVD drive can then be used externally via the eSATA port using this cable.
The ideal solution would be to use this NewmodeUS caddy as it supports the larger 12.7mm 1TB 2.5" hard drives and has a removable faceplate. The problem is the price.
At $55 including postage to the UK plus customs, VAT and clearance fees on top it's going to work out pretty expensive for what is essentially a slimline SATA to SATA extension
I hate for this to be my first post, but after looking everywhere on the internet and on this site (I've been lurking a while) I'm still at the same place I started with my Studio 15 laptop. I'll try to include as much detail as possible.
I had my laptop plugged into my LCD tv via an HDMI cable as I often do, and when I went to close the laptop to use just the LCD, the tv flashed, showed a blue screen of death for a quick second and then went black. I opened the laptop and it was still on, but the screen wouldn't go on.
I restarted my computer and from there on out it kept making a beeping noise and stalling for a really long time at the "Dell Studio/progress bar" screen. After leaving it at that screen for a while the clicking stop and then it allowed me to access the Boot Options and Setup. Under setup, when I click on the drive under SATA hard drive, it shows something like 10GB and nothing more, and I have no options on the screen .....
Back before Xmas, I had to reinstall the os so at the same time I changed the password for the hard disk that is set in the bios, before installing the os.
Problem is after the OS had installed and said it was shutting down to reboot, it never shut down properly so after 5-10mins I pushed the power button to force it to shut down.
Switched it back on, typed in the new hard disk password and it wouldnt accept it. Tried again but no success so tried the old hard disk password but even that didnt work. Anyway I've locked the hard disk now, not updated the bios or anything but wondered if there is anything I can do or Dell can do to unlock it?
Its an E6400 with the finger print scanner (can post the tag number) , I know its old laptop but still got all the receipts and everything to prove its not nicked and owned by the original owner.
I have bought Dell Vostro 5460 come with Windows 8, when i bought. it don't have preinstall DVD but it have Windows 8 sticker on my laptop, and at first i not create a system image and system repair disk, and my friend installed windows 7 on my machine and format all hard disk. my question it is possible that i want to make laptop like first time that have Windows 8.
I have a HP 15 Notebook PC with no dvd drive recently I was sent the system recovery cds from HP. I dont have an external dvd drive. What i do have is a Toshiba Satelight laptop with Widows 7 and a good dvd drive. Also I have a 500 GB external hard drive. I was thinking maybe I could copy the disks onto the external harddrive with the Toshiba dvd drive. Then attach the external hard drive to my HP 15 Notebook by usb port and install Hp recovey disks from the external hard drive.
Laptop was working fine with the factory Hitachi HTS541680J9AT00 80gb drive.
I purchased a Samsung HM160HC 160gb drive as it's supposed to be the fastest PATA laptop drive available.
I put it in and the laptop just kept saying "no operating system found" with the XP disk in the drive.
I tried several optical drives and got the same issue with all of them.
I then hooked a USB optical drive up and it wouldn't boot from it.
I removed the internal optical drive and the system then booted from the USB drive and loaded Windows fine.
I just assumed it was a fluke and once Windows was done loading I removed the USB drive, installed the factory internal optical again and turned it on...
"No operating system found".
This is where I'm stuck. If I remove the optical the system boots into Windows fine. There were no issues like this with the other hard drive.
I have tried setting the hard drive as Master, Slave, and Cable Select with no change.
Laptop has the newest BIOS.
Samsung does not offer firmware updates on their hard drives.
i got the Intel X25-M G2 80GB SSD for Christmas, and i'm looking for some help installing it. Mainly, does anyone know where i can get the hard drive caddy that is apparently needed to install a second drive (my 1747 has just one HDD)?
who opened I believe Z and connected a hard drive to dvd drive connector while leaving dvd drive in for cosmetic reasons. Can't find this thread. Where exactly can the hard drive go? Inside the tray?
I am afraid there will be too much vibration if I put regular HD there. For this reason I would rather put there SSD but is there a way to make this a primary OS drive? Seems like last bios allows to boot from optical drive.
I'm new to having Dell computers. Today I received a Dell Inspiron 15z 5233 laptop with windows 8 on it. It has a 32 GB SSD and 500 GB hard drive. I can not see the SSD drive in the windows file explorer, nor do I see it in the Disk Management utility from the Control Panel. However, I do see it in the Device Manager as an SSD and another Hard Drive in the Disk Drive section. The SSD driver is up to date. I have not installed any drivers on the computer except for the Serial ATA CY1HK_WN_12.8.0.1016_A03. That was only after I tried to install windows 7 and it said "No Drive Found" when I tried to select a drive to install on.
I googled what could be the problem and saw that it could be a driver issue with the SATA connection. So I got that driver (Intel Rapid Storage Technology Driver) and the SK Hynix Solid State Drive Firmware update. These are the most current on Dells website. This is an older computer, says late 2012. It has an i5 Processor. The SSD is SSDPM830 mSATA in the device manager. Storage Controller: Intel Mobile Express Chipset RAID SATA controller. When I try to save a file, I do not see an SSD drive, there is only one drive, the C: drive which is the 500 GB disk drive. I hope I have supplied enough information to understand the problem.
So I put the drivers on a USB and tried to install windows 7 again, and it still shows No Drive Found, and when I tried to browse for the drivers, they do not appear on the USB. It will show all the folders on the USB, but I can not open the folder they are in. So I put them directly on the USB outside of any folders, and they still do not show up. Also, I changed it to Legacy mode, safe mode off for the boot settings.
I assumed I did not have to install any drivers on windows 8, because it detects everything automatically now days. Should I go ahead and install some drivers on windows 8?
I own an Inspiron 9400 with a 160gb 5400rpm drive. I want to order the Fujitsu MHX2300BT 300gb laptop drive and replace my existing 160gb with it. The 160gb i have is 9.5mm height i believe and the 300gb from fujitsu is 12.5mm high. Will it fit? Is it as easy as removing the old drive and attaching the dell proprietary connector to the new drive and then restoring? CDW has it for 360usd and I'm itching to buy it I just want to make sure it will work.
