Dell just updated the bios to version A10.
Fixes and Enhancements:
1. Update thermal table for NVidia graphic.
I'm amazed they decided to update the bios after such a long time. Hopefully this will fix our toasty graphics cards.
It's been over two years since the last update, but Dell finally released a patch for the faulty nVidia graphics chips to help delay failure. That's the only fix listed in the A10 release. I wanted to let everyone know that if you have an nVidia graphics card in your E1705 or any other laptop from 2006-2008 you should check for the latest BIOS update because these cards have faulty thermal design that causes overheating and failure. The symptoms are odd colored pixels, video flickering, rebooting and system crashes, program crashes, odd lines on screen, etc - once you start to exerience this it's already too late, your chip is damaged and needs to be replaced. Likely, at this point, every system out there is probably already experiencing some form of failure so to be safe, if you're still under warranty, I'd use it to get a new card as soon as you can and apply this BIOS update. Anyway, you can find the BIOS update here:
[url]
I'm attempting to upgrade my wife's 9400/e1705 but it's been so long since I gave a damn about mobile CPU's that I've forgotten which ones will fit and which ones won't.
I know she has a core solo 1.66 yonah, and I know it can fit certain T1** and T2**, and I know there's a screaming fast one out there, but I don't want to buy the wrong thing.
can I upgrade to pc2-5300 ddr2-667 with my current possessor
also taking into consideration that i mite upgrade the cpu some day
How much ram can the Inspiron handle with the latest bios update
will i need a new psu to power such upgrades
feel free to fill me in on anything i'm missing here
I'm looking at some Mushkin pc2-5300 ddr2-667 2 x 1gb
Is all or most 5300 667 supported by newest bios
I found cheap ram made for imac can i use mac ram in a dell
All info and suggestions are appreciated
So here we go :
1) I'm ordering in a FX2500 to replace my 7800 go. I'm currently using Extreme-G Mobileforce driver 92.91 (I've tried some of the newer versions but prefer this one). Will this driver be compatible with the FX2500?
2) What are the best drivers for the FX2500 if not Mobileforce?
3) Overclocking... I've read the posts about flashing the 7900GTX bios to enable overclocking, does this mean i cannot overclock using the normal software way. In the Mobileforce drivers for the 7800, the option is in the Advanced Settings options in Windows. Does the FX2500/7950GTX not have this option and is BIOS flashing the only way to overclock the card?
4) If the BIOS flash is to enable voltage adjustments as well as clock adjustments, is this something I need to do or will the card do well with just altered clock speeds?
I ran Win7's Upgrade Advisor and got a couple flags on Inspiron 9400's hardware. But I've heard that people have nstalled Win7 on them (with mixed results).
A couple reports on graphics malfunctions, and someone said the Sigmatel drivers were not found.
I wouldn't bother, but I have a couple development projects that require Win7.
Wondering if anyone has had good luck with Win7, and whether there are certain things to watch out for. All drivers work OK? Did you install 32-bit or 64-bit?
Looks like same number of pins etc:
[url]
I've been using the Windows Vista (32) that came with my Inspiron 9400, now I'm going to (thankfully) upgrade to Windows 7 x64 and I'd like to know if anybody know (had used/ tested/seen) what would be the best and great driver for this nVidia GeForce 7900GS on W7 64.
I looked over nVidia website and there is currently no certified driver for this card + Windows version, so for what I see, we'll have to go either laptopvideo2go and mobileForce,
Because I had a minor problem with my laptop (since a couple of weeks it was always starting up in manufacturing mode) I decided to update my BIOS.So I downloaded the BIOS-update A19 (currently I was running A11) and followed the instructions to install it (power plugged in, shut down all applications, removed all peripherals).
Everything seemed to go fine: the computer restarted, came in BIOS and did all update tasks, but then at the point that normally Windows should start. I got stuck on a black screen and my fan blew at maximum speed.I left it running for about 5 minutes in the hope it would come back but it didn't. So I decided to try to shut down the system. This was not possible by holding down the power button. The only way was removing the power cord and battery.But after this incident my laptop is completely death. Does this mean the motherboard is completely wasted?Because I’m out of warranty it is not even possible to open a support request for it on the Dell support site.
A couple hours ago I updated my BIOS from A13 to A14. The firmware update took successfully and everything was fine, I THOUGHT.
Now, every single time (not exaggerating) that I restart my computer the Dell Circular logo pops up for maybe half a sec, and screen goes blank. Lights on laptop do it's thing, I hear the dvd-rom set itself like usual but like I said, no loading ring under the Dell logo appears, the screen just goes blank. All I have to do each time is simply push the power button till computer turns off, and turn it on again. The second time around it works completely normal and loads into Windows.
This happens every time I do a restart from windows, a restart from BIOS settings, or if I turn the computer on after it's been off for a couple minutes. The Dell circular logo appears for maybe half a sec, than screen goes blank, I wait forever and it does nothing but all I have to do each time is push the power button, let pc turn off, and push power button again and it works until the next system restart and it does it all over again.
Won't be too much of a problem but it's aggravating that every time I restart the computer I just know i'm going to have to wait for the blank screen and push the power button to turn it off and back on.
All drivers were fully updated before I performed the BIOS firmware update from A13 to A14. Update took successfully.
I unplugged laptop, and took out battery for a little while to clear my RAM, but that did not fix the problem.
I always loaded BIOS setting defaults, still have the problem.
I have no CD/DVD in the ROM, nor do I have any USB devices, memory cards, or blue tooth device hooked to the computer.
Inspiron 5720 (all drivers updated)
BIOS Version A14
WIN 8 64-bit (fully updated)
CPU is  i5 3210m
I have installed Windows 7 Ultimate SP1 on my laptop after upgrading fom A08 to A09. At first my batter did not charge at all , so i got it replaced with a 9 Cell one. But it would only vharge till 69%.
I tried all the way on internet uninstalling drivers, removing battery, draining it out etc. Still no chnage. Lately it is now charging only till 33% .
Now i Plan to go back to Vista Home premuim just to see if the battery charges fine. My question is do i also downgrade the BIOS or should i check first if it works fine in A09 and then install A08.
And is it safe to install A08 over A09 BIOS ?
I am thinking of upgrading to 4GB or RAM
But seem to see conflicting info about the E1705 having a limit of 2 GB of RAM
So can anyone confirm that I indeed use 2x 2GB SODIMMS in my laptop
I have a Dell E1705 / 9400. I want to upgrade RAM. Currenly i have 2 * 1GB 667 MHZ RAM. I want to upgrade to 4GB. Will my laptop support. I want to upgrade to maximum frequency ram. 800 Mhz or more. If its available.
View 7 Replies View RelatedA friend of mine has a Inspiron E1705 with a now-dead 7900M GTX. I was wondering if it is possible to put a 7800 Go GTX in it?
I could do a little upgrade for myself by buying his video-card-less notebook and putting my 9300's 7800Go GTX in
I have a high end speced Inspiron 9400:
2.13 core 2 duo, 2gig ram, 100gig 7200 rpm hd, 1920x1600 true life screen, 7800go gfx which I purchased in June 2006. I am in the UK so this cost me £1100 from the Dell outlet.
During December 2007 it has had 4 service calls where the motherboard, graphics card, and lcd have been changed 4 times with the same fault occurring (lines on lcd).
Dell have kindly agreed at my request to swap the laptop for a new 9400, but as the 9400 is no longer in production Dell said they will give me a similar spec 1720 instead, which was nice of them and I agreed. Here is the spec for the 1720:
2.2gig cpu, 2gig ram, 160 5400rpm hd, 8600 gfx, 1920x1600 lcd.
All seemed fine but slower hd which I can live with (just about).
I then started doing some research and discovered the 8600 is slower than the 7800 I had? and the laptop has no DVI port! I used to connect the 9400 to my external montior and sometimes my HD TV using the DVI and will miss it dearly on the 1720.
Would it be unreasonable for me to ask for a higher spec machine over the 1720?
I got a sweet deal from a friend of mine who is going to sell me a T7500 for $50. The problem is, T7500 is 800Mhz. Will my dell e1705 support it?
View 15 Replies View RelatedI thought I would put the E7105 through some tests to see what various Memory configs benchmark at.
Starting with 1 Gig Single DDR @ 533 Mhz, then 2 x 1 GB @ 533 in Dual Channel
Then I mixed a 2 GB @ 667 mhz with the 1 GB @ 533 Mhz
Last the 2 x 2 GB Memory @ 667.
I ran Super Pi on each config, Sandra Memory Benchmarks, and 3DMark06.
Did not see any Difference in the 3DMark Tests.
Video Memory Reported as 495 MB Video 248 MB System 743 Mb Texture
1 GB Tests
Super Pi = 5.38.14 ( 5 Min 38.14 Seconds)
Sandra Tests
Memory Bandwidth = 3258 MB/S
Latency = 118 ns
Cache & Memory = 14416 MB/S
2 GB Tests
Super Pi = 5.28.625 ( 5 Min 28.625 Seconds)
Sandra Tests........................
My friend just told me he heard this was true. Can anyone confirm? I know there are 2 different brands of LCDs floating around in the E1705/9400. A Samsung model, and a Phillips. However he claimed that the M1710 used one different than the E1705/9400, and was a blazing 30% brighter.
View 10 Replies View RelatedI have a Dell 17inch E1705/9400 notebook and Vista home. I recently purchased a [url]Samsung DVD burner. I replaced the stock one, and once I turned the computer on the OS does not detect the new drive at all . The drive will not open when the button is pressed, but the power (reading?) light is on ALL the time. I do not hear the drive making any noise, only at startup.
View 12 Replies View RelatedI need a new CPU Heatsink DF031 for my 9400/E1705 but I don't have a service tag
Would anyone be willing to order me one to my address or lend me your tag info
I need this so badly my poor laptop is in pieces
any help is greatly appreciated
I live in Ontario so anyone in Canada would probably work out best
anyone intersested in doing this for me will be compensated via paypal
My Inspiron 9400/E1705 case is getting a little banged up and I was wondering if it's possible to use a M1705 case (bezel, palmrest, base, etc). as a replacement.
View 10 Replies View RelatedI got a Dell Inspiron 9400/E1705 here that will not boot. The owner said he put into hibernate and went home, when he came in and turned it back on it was sluggish for about 10 minutes, he powered it off and then it would not power back up.
When you turn on the power the power and HD lights come on, you hear what sounds like the HD doing some movement and then it shuts down in a few seconds.
I removed the HD, ram, dvd, wifi, modem and tested it with same results. Also took out the CMOS battery to try to reset the BIOS and put it all back together and same thing.
CPU fan does not spin at all on power up, not sure if this model is supposed to do that little 5 second thing most of them do.
No beeps, nothing on the screen, etc.
Is there a way to determine if its the motherboard OR the video card, as this has a discrete video card, not integrated. Would you get any kind of system response if the video card was dead but the motherboard/cpu was ok ?. I would rather replace one and not both if I can tell which to go after first.
thanks for any ideas or advice.
My 7950GTX failed and all replacement cards I've seen on Ebay, from the X1400, 7900GS or better are overpriced.
Since I won't be gaming with my laptop anymore, I was thinking of replacing my motherboard with the one with integrated onboard video, which is more cost effective.
Do you know if it fits, meaning will my current LCD connector fits this motherboard ? Should I expect a bad surprise?
Could a few technologists in the know give me a detailed rundown on the primary differences between the three nVidia card options for the E1705/9400?
I quickly replaced my original X1400 with a dual pipe 7900GS but I am now interested in either moving up to a 7900GTX or a 7950GTX. I know I will also need to upgrade to the 130W or 150W PS as well.
I am looking for comparison information regarding memory, clockspeeds, pipeline counts, pixel/vertex units, pixel/fill rates, processing bandwidth, etc.
I am also curious about a good source for the purchase of any of these items. I have found one posting on eBay for a 7950GTX. I am interested to know if I can purchase directly from Dell, or save a few bucks by purchasing from eBay or a forum member. I also know I have read that there are equivalent Quadro (sp?) cards which will work in my machine. Are there any disadvantages to taking this route?
I know I could dig through a thousand plus posts on the topics and find all of the information I want, but I also know how much you guys thrive on expressing your technical expertise on subjects such as this ..........................
My vostro 3450 fan almost never stops. Always running in slow speed and constantly bursting to fast speeds. I have updated my BIOS to A11.
View 15 Replies View Relatednew bios is up on the Acer support listed as version 1.16V?
I checked out the file but nothing listed and documentation?
Acer 6920G Bios Updated 1.16v
Unfortunately I updated this laptop with a Bios that was geared for a different model. The BIOS functioned and now I'm in BSOD hell.
Â
Anyway to make a BIOS USB that I can back this update out? When I try to restore the previous BIOS that Flash tool returns a Blue Screen.
I have an acer aspire 1652WLMi with ATI MObility RADEON X300 PCI-Express.
I updated my bios with the file "3A45 for ATI M22, M24 and M26" and... its wrong.
The laptop is dead. The screen is always black when I tur the laptop on.
Does any body here can help me to recover or flash my old bios or a new one working?
Model: Lenovo U310 laptop
View 3 Replies View RelatedI need to enable virtualisation on my Aspire v3-551 running updated Bios 2.14.
I also would like to know if there is anyway (within bios) to increase my fan speed?