Acer :: 6920G Bios Updated 1.16v Released
Mar 19, 2010new bios is up on the Acer support listed as version 1.16V?
I checked out the file but nothing listed and documentation?
Acer 6920G Bios Updated 1.16v
new bios is up on the Acer support listed as version 1.16V?
I checked out the file but nothing listed and documentation?
Acer 6920G Bios Updated 1.16v
I have an acer aspire 1652WLMi with ATI MObility RADEON X300 PCI-Express.
I updated my bios with the file "3A45 for ATI M22, M24 and M26" and... its wrong.
The laptop is dead. The screen is always black when I tur the laptop on.
Does any body here can help me to recover or flash my old bios or a new one working?
I need to enable virtualisation on my Aspire v3-551 running updated Bios 2.14.
I also would like to know if there is anyway (within bios) to increase my fan speed?
Updated the bios in a Aspire 7740g from version 1.15 to 1.16 but with poor result. It flashed everything correctly, but when rebooting, nothing... Black screen.
The fan starts and stops after a few seconds, led's indicating that it's "alive", and I've tried the crisis recovery tool with bios 1.15 or 1.16. First with USB-drive (tried all ports), then on a CD-R. No sign of activity on the USB, but the CD-R spins up, head reading and can hear it working for 30-60 sec., rebooting, but then - nothing.
I have tried all key-commands, suggested on the net. Win+ESC, Win+B, Fn+ESC, Fn+B, but - nothing. (Power off, plug and battery removed, hold keys down, power connected and power on.....)
The battery is dead and removed, but it doesn't seem as it matters anyway?
What kind of bios does this Aspire have? Any other key-commands I should try? It seems as the Recovery Boot Block is there somehow, as the CD/DVD-drive spins up and sounds as it's working.
I need to enable virtualisation on my Aspire v3-551 running updated Bios 2.14. I also would like to know if there is anyway (within bios) to increase my fan speed?
View 4 Replies View RelatedI updated bios on Acer Aspire E1-510 to 2.11v(legacy BIOS available) so I can install Windows 7.
I successfully installed Windows 7 but when I switch on the notebook monitor starts to blink,it is not happened before untl
I updated the BIOS and installed Windows 7.I returned to Windows 8 but again the same happens.(only when system booting up)I dont like that and i wanna fix that!
Here is video: [URL] ....
1. Updated Intel(R) Active Management Technology firmware.
2. Updated PXE OPROM
3. Updated TPM MA/MP driver.
4. Showed LOM MAC address in BIOS setup.
Fixes/Enhancements
------------------
1. Updated thermal table.
2. Removed HDD Acoustic support.
3. Added password support for remote console.
4. Fixed issue where Local KB control is not released properly during or after IDER session.
5. Enhanced INT 19h support.
Please update to the revision immediately and post your results here. It seems importance is rated as Recommended and not urgent, so I'm not sure whether or not the system downclock and fan issues have been fixed, which is quite an urgent matter.
If someone could get a log file of the changes from Dell that would be great.
Update: Thanks Weegie:
Fixes/Enhancements
------------------
1. Added support for BIOS that is signed.
2. Updated to PSA build 4117.
3. Updated thermal table.
4. Fixed the issue where system is slow to boot to internal hard drive after failed PXE boot exits.
5. Fixed the issue where Some BIOS Setup parameters are not accessible with only the keyboard.
6. Fixed the issue where system will automatically shut down at resuming from S3.
7. Fixed the issue where the time of BIOS power event log in Setup is wrong for power button event.
8. Fixed the issue where presentation mode cannot be turned on/off from the DCP.
These things look sOoOoOoO important .
During the flash, the only thing that appeared was "Updating Keyboard Controller ROM", but I don't know if that's regular or not. I will be gaming with this new revision and posting results soon.
All in all, nothing to see here. Seems like Dell either a) does not read our threads, or b) does not care. Nothing to see here .
if anybody has a older version of the bios for Acer aspire 6920G, please send it to tbulls@gmail.com, thanks so much.
I've refreshed my bios to 1.07 and I have tried 1.06 and 1.10.
I am not sure if they are official release version, but since I've refreshed my bios with these versions, my computer fails.
In the past, I could use recovery DVD to restore my system, and audio drive work fine, very high quality. Now it's gone, even I use recovery DVD, my audio drive does not works fine.
It sounds like a realtek HD public drive (low sound quality), and I cannot use plug-in microphone when 5.1 Dolby effect opened.
Dell XPS 1640 System BIOS A10
Changelog states:
1) Enhance graphic function.
I've noticed that it adds display dimming and brightness levels to Power Options:
However, I haven't noticed any changes to the RGBLED screen calibration as was reported by KSMB in the RGBLED thread.
Dell has released A09 update for Studio XPS 1645 on 17-May-2010
The update resolves following issues:
*Features update:
1. Update Processor Power Management(PPM) from 0.60 to 0.63-1 .
2. Support 2nd source SPI ROM EN25F32(BIOS) and EN25F80(EC).
3. Update ME bin file in BIOS for 2nd source SPI ROM EN25F32(BIOS).
4. Modified flash part size to prevent BIOS crash in failsafe part for factory only.
5. Support over 230W adapter to treat as 130W(EC).
6. Update Clarksfield thermal table to V.03(EC).
7. Enhanced PPM RC code for P-state thread count.
*Issues fix:
1. Fix S4 long run failed on DC mode with BSOD 9F.
2. Paltrow freeze issue: Hang up when playing youtube HD film.
3. Fix unable to communicate with battery error under delldiag.
4. Fix ACPI_PSD error in "powercfg -energy" tool under windows.
5. Fix Micron DDR3 memory can not boot up issue.
what are the changes and update for this new BIOS?
View 10 Replies View RelatedFirst of all, I have no idea if this has already been covered on the "Precision M4400 Owner's Lounge" thread, I have not been following it for it getting longer and longer.
So, I opened a new thread to tell everyone that Dell has released BIOS A13 for the M4400. I installed it yesterday, and not only is my machine quieter under light load, its graphics performance is also higher - much higher, actually.
I used to think that my FX1700M was not affected by the downclocking, but now I stand corrected.
It WAS indeed downclocking heavily as it seems. When I was playing some UT3 a couple of hours ago, I suddenly actually had double(!) the frame rate compared to what I had with BIOS A12.
I maxed out some settings to see what would happen, and at settings that I was not able to make it run smooth some weeks ago I now got 30 to 40 frames per second
There were many SR4 laptops sold in May 2009 in China suffering the problem of stopping responding randomly and frequently, which caused quite a lot of hot threads discussing.
Sony identified the problem as some bugs in BIOS firmware and hence released an update to fix this.
Official site:[url] (Chinese site, Google Translate may work)
Download link: [url]
As a "side effect" some customers noticed that Sony has officially enabled the option of VT in BIOS settings!
This is quite unbelievable according to the usual style of Sony. Maybe it is because of the pressure from XP mode in the upcoming Windows 7.
Unfortunately the BIOS update still does not give SLIC 2.1 so to activate Windows 7 we still need SLIC 2.1 from Lenovo or other brands.
i desperate about it. need a bios for Ati mobility radeon hd3650 512mb. I'm even ready to pay 30 euros for this bios if you will get it till the morning of 08.04.2009.
View 10 Replies View RelatedUnfortunately I updated this laptop with a Bios that was geared for a different model. The BIOS functioned and now I'm in BSOD hell.
Anyway to make a BIOS USB that I can back this update out? When I try to restore the previous BIOS that Flash tool returns a Blue Screen.
Dell just updated the bios to version A10.
Fixes and Enhancements:
1. Update thermal table for NVidia graphic.
I'm amazed they decided to update the bios after such a long time. Hopefully this will fix our toasty graphics cards.
Because I had a minor problem with my laptop (since a couple of weeks it was always starting up in manufacturing mode) I decided to update my BIOS.So I downloaded the BIOS-update A19 (currently I was running A11) and followed the instructions to install it (power plugged in, shut down all applications, removed all peripherals).
Everything seemed to go fine: the computer restarted, came in BIOS and did all update tasks, but then at the point that normally Windows should start. I got stuck on a black screen and my fan blew at maximum speed.I left it running for about 5 minutes in the hope it would come back but it didn't. So I decided to try to shut down the system. This was not possible by holding down the power button. The only way was removing the power cord and battery.But after this incident my laptop is completely death. Does this mean the motherboard is completely wasted?Because I’m out of warranty it is not even possible to open a support request for it on the Dell support site.
My vostro 3450 fan almost never stops. Always running in slow speed and constantly bursting to fast speeds. I have updated my BIOS to A11.
View 15 Replies View RelatedModel: Lenovo U310 laptop
View 3 Replies View RelatedA couple hours ago I updated my BIOS from A13 to A14. The firmware update took successfully and everything was fine, I THOUGHT.
Now, every single time (not exaggerating) that I restart my computer the Dell Circular logo pops up for maybe half a sec, and screen goes blank. Lights on laptop do it's thing, I hear the dvd-rom set itself like usual but like I said, no loading ring under the Dell logo appears, the screen just goes blank. All I have to do each time is simply push the power button till computer turns off, and turn it on again. The second time around it works completely normal and loads into Windows.
This happens every time I do a restart from windows, a restart from BIOS settings, or if I turn the computer on after it's been off for a couple minutes. The Dell circular logo appears for maybe half a sec, than screen goes blank, I wait forever and it does nothing but all I have to do each time is push the power button, let pc turn off, and push power button again and it works until the next system restart and it does it all over again.
Won't be too much of a problem but it's aggravating that every time I restart the computer I just know i'm going to have to wait for the blank screen and push the power button to turn it off and back on.
All drivers were fully updated before I performed the BIOS firmware update from A13 to A14. Update took successfully.
I unplugged laptop, and took out battery for a little while to clear my RAM, but that did not fix the problem.
I always loaded BIOS setting defaults, still have the problem.
I have no CD/DVD in the ROM, nor do I have any USB devices, memory cards, or blue tooth device hooked to the computer.
Inspiron 5720 (all drivers updated)
BIOS Version A14
WIN 8 64-bit (fully updated)
CPU is i5 3210m
I have installed Windows 7 Ultimate SP1 on my laptop after upgrading fom A08 to A09. At first my batter did not charge at all , so i got it replaced with a 9 Cell one. But it would only vharge till 69%.
I tried all the way on internet uninstalling drivers, removing battery, draining it out etc. Still no chnage. Lately it is now charging only till 33% .
Now i Plan to go back to Vista Home premuim just to see if the battery charges fine. My question is do i also downgrade the BIOS or should i check first if it works fine in A09 and then install A08.
And is it safe to install A08 over A09 BIOS ?
I have an HP DV6226US and I recently updated the BIOS to the F.2D version (from what I remember as F.14, and that BIOS version F.14 is not listed under the previous versions in the download section). I am running vista 32 os. F.2D is the version that is given for my model of computer on the HP software and drivers site. When I ran the updater, I remember it saying it checked compatibility before the BIOS flash and that it was the correct one. I do however have a T2250 intel processor rather than a T2060, which was the processor that my laptop was supposed to come with and I don't know if that would have any effect on which BIOS update I truly need.
Here is my question....
Before the flash the fan used to run constantly with obvious varying degrees of RPM's. After the flash, the fan doesn't seem to come on at all. It turned on once when I restarted the computer (right before it started loading vista). Other than that, I can't here a thing. However, I have used HD Tune and a very simple CPU monitor to see what kind of temps the internals are running at. My HDD (WD scorpion black 7200rpm 320GB) is running at constant 46c to 47c. Well within the manufactures specs, even under scans of the 200+gb loaded onto it. The CPU cores seem to be well within manufactures specs as well. Is this change in fan behavior due to the BIOS update, and if I should be concerned about the seemingly lack of fan activity. I use this laptop for DJ and Karaoke at 4 to 5 hour intervals about 5 days a week, and require that it not overheat.
I've updated the BIOS on my t500 Monday. Followed all directions. Now when I power on the t500, it takes 10 minutes before it begins to boot. I see the lights, I hear the fans, but not video for 10 minutes.
View 9 Replies View RelatedI updated the Bios of my Ideapad U310 to version 65CN99WW and now I can't enter Windows 8.1, it remains in a kind of boot menu. When I turn on the Laptop it desn't even show the Lenovo sign that used to,
View 9 Replies View RelatedI have trouble with my audio driver on my lenovo laptop. After I updated BIOS to version 1.21, my sound stopped working. I tried to reinstall audio driver, but when I reboot my computer, sound is not working again.
I read about flashing BIOS back, but I dont know where to download old version.
I had an admin power on password on a T420 that contained a character that isn't allowed in the newer version (old password had a dash - in it) and I didn't remove the password prior to update so now I can't get into the BIOS as admin - are dashes changed to something else during update or can I revert back to a previous bios version (if so where are they located)?
View 2 Replies View RelatedJust checked their supprt website today and had found the new ePower for Windows 7 (I have the Timeline 4810T).
Can someone test that and verify that the battery power consumption is similar to the vista?
I see the old attempt at 3D now has twice the processing power and twice the graphics power thrown at it. Has anyone tested it for performance? I'm curious if it's improved enough to be worthy of purchase.
View 4 Replies View Related