I had an admin power on password on a T420 that contained a character that isn't allowed in the newer version (old password had a dash - in it) and I didn't remove the password prior to update so now I can't get into the BIOS as admin - are dashes changed to something else during update or can I revert back to a previous bios version (if so where are they located)?
View 2 RepliesMy T420 doesn't power on at all. I have tried to turn it on with cable, w/o cable, different baterries, removed rams and tried same things, tried holding down power button for 60 secs, tried with an other keyboard and I couldn't manage to start the laptop. No reaction at all, no blinking or anything.
View 4 Replies View RelatedI purchased this wonderful machine from a friend of mine after he had me install a copy of Windows 7 (64) onto it. I am not entirely sure when this problem started.
Problem: I can access my BIOS, but my settings are completely greyed out, I cannot select, much less change anything in it. After startup and I press the "BLUE" button, it prompts me for a power up password, so I press the enter key without typing anything in, which is how I believe I set it, and it allows me to "see" the BIOS settings. I am never prompted for a SVP as I do not believe there is one, although when gazing into the mystic BIOS I see the security settings are as follows-
SUPERVISOR PASSWORD [ENTER]
PASSWORD STATUS ENABLED
LOCK VEFI BIOS SETTINGS ENABLED
SET MINIMUM LENGTH DISABLED
PASSWORD AT
UNATTENDED BOOT [ENABLED]
PASSWORD AT START DISABLED
The entire section is greyed out, and I do realize that I am indeed missing some settings that ARE in my BIOS, such as HDD Password (NONE) and I believe something else.
I am trying to edit my display and optimus settings, as I am an avid game player, and the NVIDIA card appears to be a much better option, but I however, cannot.
I think my attempt to update BIOS with a "BIOS update bootable CD" method has failed!
My laptop: Lenovo Thinkpad T420, i5 @ 2.5GHz, 4 GB RAM.
My old BIOS infos (taken from Setup before update attempt):
UEFI BIOS Version 83ET52WW (1.22)
UEFI BIOS Date (Year-Month-Day) 2011-03-24
Embedded Controller Version 83HT27WW (1.11)
I intended to update my BIOS to version 1.46 using "BIOS Update Bootable CD" from this link: [URL] .....
Steps:
1) I downloaded this ISO image: [URL] .... and burned it on a DVD-RW(DVD rewritable) medium.
2) I placed the DVD in my T420 and turned it off, then turned it on, select F12 (boot menu), selected DVD to boot from, and the BIOS update utility started.
3) In BIOS update utility I pressed "1" to read the instructions, then press "2" to update BIOS. I clicked "Y" to confirm and the update operation started. First it said " Now updating... ", then afer about 2 minutes, it said "Still updating ..." and it stuck like this.
So, right now, this message stays on my screen for about 1,5 hours(!!!):
"Still updating...
It may take about a few minutes.
<<< CAUTION >>>
Do not turn off the computer during the update.
Do not remove the CD during the update."
Other details (on system setup and current behaviour): AC was continously plugged in before&during BIOS update, battery is OK, no hard disk activity at all, keyboard is(seems) unresponsive, system's temperature is pretty high, but not dangerously high...
My T420 takes about 20 seconds from pushing the power on button to the Lenovo POST screen. After that boot takes about 30 seconds to Desktop. What bothers me is this long wait until I see the POST screen. It doesn't seem normal to me.
My System is setup with Windows 7 64bit booting from UEFI on a mSATA Crucial M500 SSD. It has 16GB of Ram and a i7 CPU. I have the newest BIOS (1.46) installed.
Why it takes this long to reach the POST screen?
we got several T420 with different BIOS versions (from 1.30 to 1.40) On 95% of them the "Clear Security Chip" Option is available @ BIOS but on some of them the option is missing.
View 3 Replies View RelatedI've updated the BIOS on my t500 Monday. Followed all directions. Now when I power on the t500, it takes 10 minutes before it begins to boot. I see the lights, I hear the fans, but not video for 10 minutes.
View 9 Replies View RelatedI returning my T410 supplied by my employer as I am leaving the company. Would like to change the power on password, but cannot see the option to do it. I do know the password so was assuming this should be stragiht forward.
View 5 Replies View RelatedHow can i remove my bios password on a t410s and on t410. I work by selling refubished computer and i have some t410s and t410 but with bios password, can i flash bios, to remove it?if yes, how?
Is there any jumpers on them (specially on t410s)...
I purchased online a T440s brand new. I opened the box for the first time myself. When I enter BIOS it asks for password and I just hit enter without entering any password. I can enter the BIOS but i can not change any settings.
What can I do? Can a brand new thinkpad come with a BIOS password out the box?
I get conflicting information regarding the type of password. First image says it's power on which can be removed but bios says its supervisor.
I have a T420 Full model number: 4180-PR1
I have a 320 GB HDD, but it's nearly full, I am thinking about buying an SSD.
I wanted to know is it possible to have 1 SSD and keep the existing 320GB HDD and run it alongside each other?
If so, where would the SSD go?
T420 4180-PR1 - OS: Windows 7 Pro 64 bit
I seem to have a failed brand new SSD. Before I RMA it.
-I've just used Samsung data migration to copy my C drive to a Samsung 840 Pro 128GB SSD as usual.
-I went into device driver, and set the SSD to cache writes, so the SSD was working then.
-I removed the 320GB SSD, installed the SSD and rebooted.
-After the BIOS flash screen, the system halts with a funny symbol on the screen and a flashing cursor.
-It responds to Ctrl Alt Del. but doesn't get as far as testing the DVD drive.
-After replacing the SSD with the HDD and rebooting, all is fine again ...
-The BIOS shows AHCI mode, and the SSD and contents (in a USB3 drive caddy) are visible and readable.
I can't use Samsung SSD magician because it won't see the SSD over USB (clever!), so can't work out how to upgrade firmware. This is an i5, 8GB, 320GB machine with 1600x900 screen, with XP Pro 64-bit.
What gives?? Others here have posted with working 840 Pros in a T420, so I think it's compatible. Could this be a SATA2/SATA3 thing or AHCI? I can't see any SATA2/3 control in the BIOS - does it just auto-negotiate?
I am getting a T420 as my new Corporate laptop. I want to buy an SSD drive to replace the internal hard drive. I found the newest bios/firmware and looked at the Readme file. It lists the latest drives and model numbers but not any of the previous models? How do I get a complete list of all SSD drives/models supported on the T420? The laptop is going to be imaged with Win7 if that matters.
View 1 Replies View RelatedMy T420 has the 2100 error on HDD0 few days ago. I went to the IT center and found the hard drive is completely dead. My original hdd is 500G seagate. So sad, all the music and good memories are gone.
I have to update the hard drive. Any suggestions on the SSD? I heard i can only update to 160G ssd, is this true?
I'm facing an annoying problem with my T420. When in battery mode the machine goes to sleep after some minutes. WHILE I'm working on it... But than it is NOT possible to wake it again.
View 8 Replies View RelatedI have a question: I have Lenovo Think Pad T420 with preinstalled Windows 7 Prof OA CIS and GE
I recently format it, and now I need Windows 7 image to reinstall system. Where I can get it?
May I use MSDN image for Windows 7 Prof RU and activate it using product key which I have on my laptop?
What is the max size of ssd support T420 Model.
View 2 Replies View RelatedI have been trying to install a new version of windows on my T420s laptop but have been unable to get the system bios to allow me to select the USB jump drive. I have tried a number of different BIOS setting trying to get the drive to show up in the F12 boot list. The only devices that show up are the SSD Hard Drive, the CD/DVD drive and the network boot option.
note I have tried all 3 USB ports, I have 3 different USB jump drives and each of them work when connected to other systems.
my 4-in-1 card reader (04W1701)is on the fritz, can't find any on ebay, but there are plenty of '5-in-1' (FRU 45M2658) to be had. Can I use that instead?
T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit
I have a T420 with Windows 7 SP1. I bought a replacement battery of 0A36303 (ThinkPad Battery 70++ (9 cell)) and got one with a new Replacement part number (FRU) of 45N1007 (it is clearly written on the battery alongside “ASM P/N 45N1006”).
[URL] .....
After I installed it in the laptop and made sure to run System Update and update all the Lenovo software to its latest versions.
I also run the Lenovo Battery Firmware update utility, which informed me that the battery has the latest firmware (0003-0080-0100-0165). [URL] .....
When I run “Power Manager” (latest version, 6.66.3) and choose the tab of “Battery” I have this mismatch data:
Both “Design Capacity” and “Full Charge Capacity” shows "90.00 Wh" which almost fits the characteristics of the 0A36303 battery (as detailed at [URL] .....) which is "94 Wh" (in compare with "57 Wh" for the 0A36302 model, detailed on the same web page mentioned above)
But the “FRU part number” field says “45N1001” which fits the “0A36302” model… (as detailed at [URL] ....)
Why is this mismatch?
I bought t420 last month. Yesterday i spilled liquid on the clicks on touchpad. The right button works but it freezes sometimes, left doesn't work at all. Because i am in Europe now,the warnity does not cover. Also the ultranav buttons don't work. With external mouse it works.
View 6 Replies View RelatedI have a T420 with the standard 1366 x 768 resolution. If I replace the sreen with a WXGA 1600 x 900 will the graphics card be able to drive it?
View 1 Replies View RelatedI have HP 2000-412NR and I removed my bios power on administrator password by typing my old password and in the new password field, I put empty (did not type anything), and saved it. After power on it still ask me the administrator password, and now no matter what I typed, I always got incorrect password, disable code 52559062.
View 2 Replies View RelatedIs there a way to turn on or off the wireless/bluetooth radio when the T420 is docked and using an external keyboard? I don't want to open the lid on the T420 every time to use the Fn+F5 keys when docked.
View 2 Replies View RelatedThe Lenovo fingerprint reader software isn`t running on windows 8.1?
View 7 Replies View RelatedI have Lenovo T420s plugged into ThinkPad Mini Dock Plus Series 3 with USB 3.0 90W. The problem I have USB 3.0 port on the dock (blue one) works as USB 2.0. The laptop port works fine. I am checking it by plugging Seagate mobile HDD - when the HDD is plugged into the blue port on the dock station Windows (7, 64-bit) complains 'Device can perform faster', using laptop's port doesn't trigger the message.
USB 3.0 driver is installed.
BIOS version is 1.37.
Intel Chipset drivers are updated.
Device manager shows the connection as a chain of two 'Generic USB Hub's, if HDD is connected to the laptop's port its chain of 'Renesas Electronics USB 3.0 .......
I consider buying a new notebook and T420 is a hot candidate for me. I'm not sure yet whether I would go for a Core i5 or i7 processor, however I'm sure I'd like to upgrade the RAM in the future and 16 GB . I found out in the Intel specifications that (not only) the i5 2540 and i7 2640 that are available in the T420 configurations support up to 16 GB RAM, however in the T420 specifications concerning those processors I found that only 8 GB of RAM are supported. AFAIK the memory controller is integrated in the processor in these cases, so is there another factor that limits the size to 8 GB, or is it only an improper information in the T420 specs?
View 9 Replies View RelatedIs it safe to swap hardrives that are running windows 7 between two t420's? I have read in the past that the OS is tied to the hardware and doing such a swap will cause errors or blue screen.
View 2 Replies View RelatedI have a wireless mouse and printer plugged into the USB ports of my docking station and generally have no issues with them functioning. However, when I take my laptop off the docking station and then return it to the docking station, the laptop no longer recognizes the keyboard and also says that the printer is not connected. Once I restart they both work. I have also tried to unplug the wireless receiver for my keyboard from the docking station and plug into the laptop, but it still does not work without reboot.
View 7 Replies View RelatedI purchased my T420 one year ago and have sufficiently "hosed it up" to the point I wanted to do a factory restore. I saved all my data then proceeded to create the CDs from the Q drive factory restore. I followed the instructs for more and more CDs and once I got up to #12 I noted that the time it was taking to create them was down from several minutes to several seconds. When I got to CD number 18 I thought "this is ridicules" and I popped CD 11 back in to look at its content (via Windows Explorer). I noted it had two folders: 1) Factory restore (or something like that) which was over 500 MB in size and 2) something about data. This "data" folder contained 1 KB of data. I then looked at all subsequent CDs (12-18) and they all only contained this data file. So, rather than continuing to make these (basically empty CDs) I stopped.
I then put the first CD in and rebooted the machine. The factory restore started and I swapped CDs until I got to 12. I put 12 in and it said the required data was not present and to insert the next CD. I did this until I ran out of the CDs I had created. I had to "X" out of the restore app and now when I boot I get nothing but a dimly lit screen and a flickering hard drive light! Am I totally hosed here? How many CDs would it have required had I kept making them? I am ( obviously) a novice.