Lenovo T420 T400 / T500 :: Will Not Boot To USB Jump Drive
Mar 5, 2012
I have been trying to install a new version of windows on my T420s laptop but have been unable to get the system bios to allow me to select the USB jump drive. I have tried a number of different BIOS setting trying to get the drive to show up in the F12 boot list. The only devices that show up are the SSD Hard Drive, the CD/DVD drive and the network boot option.
note I have tried all 3 USB ports, I have 3 different USB jump drives and each of them work when connected to other systems.
View 9 Replies
ADVERTISEMENT
Jan 31, 2013
I seem to have a failed brand new SSD. Before I RMA it.
-I've just used Samsung data migration to copy my C drive to a Samsung 840 Pro 128GB SSD as usual.
-I went into device driver, and set the SSD to cache writes, so the SSD was working then.
-I removed the 320GB SSD, installed the SSD and rebooted.
-After the BIOS flash screen, the system halts with a funny symbol on the screen and a flashing cursor.
-It responds to Ctrl Alt Del. but doesn't get as far as testing the DVD drive.
-After replacing the SSD with the HDD and rebooting, all is fine again ...
-The BIOS shows AHCI mode, and the SSD and contents (in a USB3 drive caddy) are visible and readable.
I can't use Samsung SSD magician because it won't see the SSD over USB (clever!), so can't work out how to upgrade firmware. This is an i5, 8GB, 320GB machine with 1600x900 screen, with XP Pro 64-bit.
What gives?? Others here have posted with working 840 Pros in a T420, so I think it's compatible. Could this be a SATA2/SATA3 thing or AHCI? I can't see any SATA2/3 control in the BIOS - does it just auto-negotiate?
View 9 Replies
View Related
Sep 3, 2013
Ever since i've wiped the machine, i've been having these two problems. When I close the lid, it used to go to sleep straight away, but now I can see the sleep light (and the power button) flash and flash, then it goes to sleep.
When waking up it goes through the lenovo startup screen and resuming windows, then it asks for a password, before I used to open the lid and it would ask me for the password straight away. I know it was going to sleep because I could hear the beep straight away when I closed and opened it, but now it just takes too long.
Also, everytime I boot up into windows or resume into windows from a sleep state, I can hear the device noise, like something is being plugged in/out. But there is nothing being plugged in or out at the time. I can't get to device manager quick enough to see what it is that is causing it. But all drivers seem okay.
Also noticed, when the lid is closed, randomly the laptop turns off (hear the beep) an then turns back off again.
T420 model number: 4180-PR1 with OS: Windows 7 Pro 64 bit
View 8 Replies
View Related
Sep 3, 2013
I have a T420 Full model number: 4180-PR1
I have a 320 GB HDD, but it's nearly full, I am thinking about buying an SSD.
I wanted to know is it possible to have 1 SSD and keep the existing 320GB HDD and run it alongside each other?
If so, where would the SSD go?
T420 4180-PR1 - OS: Windows 7 Pro 64 bit
View 9 Replies
View Related
Sep 28, 2014
I purchased this wonderful machine from a friend of mine after he had me install a copy of Windows 7 (64) onto it. I am not entirely sure when this problem started.
Problem: I can access my BIOS, but my settings are completely greyed out, I cannot select, much less change anything in it. After startup and I press the "BLUE" button, it prompts me for a power up password, so I press the enter key without typing anything in, which is how I believe I set it, and it allows me to "see" the BIOS settings. I am never prompted for a SVP as I do not believe there is one, although when gazing into the mystic BIOS I see the security settings are as follows-
SUPERVISOR PASSWORD [ENTER]
PASSWORD STATUS ENABLED
LOCK VEFI BIOS SETTINGS ENABLED
SET MINIMUM LENGTH DISABLED
PASSWORD AT
UNATTENDED BOOT [ENABLED]
PASSWORD AT START DISABLED
The entire section is greyed out, and I do realize that I am indeed missing some settings that ARE in my BIOS, such as HDD Password (NONE) and I believe something else.
I am trying to edit my display and optimus settings, as I am an avid game player, and the NVIDIA card appears to be a much better option, but I however, cannot.
View 4 Replies
View Related
Nov 22, 2013
I am getting a T420 as my new Corporate laptop. I want to buy an SSD drive to replace the internal hard drive. I found the newest bios/firmware and looked at the Readme file. It lists the latest drives and model numbers but not any of the previous models? How do I get a complete list of all SSD drives/models supported on the T420? The laptop is going to be imaged with Win7 if that matters.
View 1 Replies
View Related
Aug 18, 2013
I wanted to change boot sequence to boot from external DVD drive to install Win8. To access the BIOS I hit Enter (empty password I guess) but in the BIOS everything is greyed out: I can't make any changes. What is going on?
View 9 Replies
View Related
May 20, 2014
My T420 has the 2100 error on HDD0 few days ago. I went to the IT center and found the hard drive is completely dead. My original hdd is 500G seagate. So sad, all the music and good memories are gone.
I have to update the hard drive. Any suggestions on the SSD? I heard i can only update to 160G ssd, is this true?
View 2 Replies
View Related
Apr 11, 2014
I'm facing an annoying problem with my T420. When in battery mode the machine goes to sleep after some minutes. WHILE I'm working on it... But than it is NOT possible to wake it again.
View 8 Replies
View Related
Dec 24, 2014
I have a question: I have Lenovo Think Pad T420 with preinstalled Windows 7 Prof OA CIS and GE
I recently format it, and now I need Windows 7 image to reinstall system. Where I can get it?
May I use MSDN image for Windows 7 Prof RU and activate it using product key which I have on my laptop?
View 1 Replies
View Related
Jun 15, 2014
What is the max size of ssd support T420 Model.
View 2 Replies
View Related
Jul 5, 2010
my 4-in-1 card reader (04W1701)is on the fritz, can't find any on ebay, but there are plenty of '5-in-1' (FRU 45M2658) to be had. Can I use that instead?
T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit
View 6 Replies
View Related
Sep 11, 2014
My T420 doesn't power on at all. I have tried to turn it on with cable, w/o cable, different baterries, removed rams and tried same things, tried holding down power button for 60 secs, tried with an other keyboard and I couldn't manage to start the laptop. No reaction at all, no blinking or anything.
View 4 Replies
View Related
Oct 25, 2014
I have a T420 with Windows 7 SP1. I bought a replacement battery of 0A36303 (ThinkPad Battery 70++ (9 cell)) and got one with a new Replacement part number (FRU) of 45N1007 (it is clearly written on the battery alongside “ASM P/N 45N1006”).
[URL] .....
After I installed it in the laptop and made sure to run System Update and update all the Lenovo software to its latest versions.
I also run the Lenovo Battery Firmware update utility, which informed me that the battery has the latest firmware (0003-0080-0100-0165). [URL] .....
When I run “Power Manager” (latest version, 6.66.3) and choose the tab of “Battery” I have this mismatch data:
Both “Design Capacity” and “Full Charge Capacity” shows "90.00 Wh" which almost fits the characteristics of the 0A36303 battery (as detailed at [URL] .....) which is "94 Wh" (in compare with "57 Wh" for the 0A36302 model, detailed on the same web page mentioned above)
But the “FRU part number” field says “45N1001” which fits the “0A36302” model… (as detailed at [URL] ....)
Why is this mismatch?
View 9 Replies
View Related
Dec 6, 2011
I bought t420 last month. Yesterday i spilled liquid on the clicks on touchpad. The right button works but it freezes sometimes, left doesn't work at all. Because i am in Europe now,the warnity does not cover. Also the ultranav buttons don't work. With external mouse it works.
View 6 Replies
View Related
Dec 27, 2013
I have a T420 with the standard 1366 x 768 resolution. If I replace the sreen with a WXGA 1600 x 900 will the graphics card be able to drive it?
View 1 Replies
View Related
Nov 25, 2014
IBM/Lenovo laptops and desktops for a long time. I recently purchased a T440P laptop with a standard 7200 RPM HDD in it. In the past, with previus models, when I wanted to troubleshoot the current Windows install (virus infections etc) I would use UBCD4WIN on a USB stick to boot the computer to USB and access the hard drive to pull data off or remove files infections etc. With this new T440P I cannot seem to see the hard drive when I boot it up with the USB stick.
I can boot the computer just fine and run the USB based OS without trouble but I simply cannot see the hard drive.
So far I have tried:
-Adjusting UEFI to Legacy and/or "Both"
-Adjusted CSM to Yes and No
-Disabled/Enabled Secure Boot
and several combinations of all of the above in hopes it was the issue but it doesn't seem to change my ability to see the hard drive. It simply doesn't show up.
The drive itself (in the T440P) is a standard HDD (not SSD) and is formatted NTFS with Windows 7 64bit installed on it.. The UBCD4WIN is a basic "Windows XP" x86 (32 bit) OS on a USB stick and the USB stick is formatted FAT32.
In previous lenovo models (T400/T410 etc) all I had to do was switch AHCI to Compatibility and I could see the drive but this one is giving me a real fit and I am not exactly sure if its a controller driver, UEFI or something else.
how to see the hard drive when booting to the USB UBCD4WIN stick?
View 9 Replies
View Related
Jul 5, 2013
Is there a way to turn on or off the wireless/bluetooth radio when the T420 is docked and using an external keyboard? I don't want to open the lid on the T420 every time to use the Fn+F5 keys when docked.
View 2 Replies
View Related
Apr 18, 2012
The Lenovo fingerprint reader software isn`t running on windows 8.1?
View 7 Replies
View Related
Aug 12, 2013
I have Lenovo T420s plugged into ThinkPad Mini Dock Plus Series 3 with USB 3.0 90W. The problem I have USB 3.0 port on the dock (blue one) works as USB 2.0. The laptop port works fine. I am checking it by plugging Seagate mobile HDD - when the HDD is plugged into the blue port on the dock station Windows (7, 64-bit) complains 'Device can perform faster', using laptop's port doesn't trigger the message.
USB 3.0 driver is installed.
BIOS version is 1.37.
Intel Chipset drivers are updated.
Device manager shows the connection as a chain of two 'Generic USB Hub's, if HDD is connected to the laptop's port its chain of 'Renesas Electronics USB 3.0 .......
View 3 Replies
View Related
Nov 10, 2011
I consider buying a new notebook and T420 is a hot candidate for me. I'm not sure yet whether I would go for a Core i5 or i7 processor, however I'm sure I'd like to upgrade the RAM in the future and 16 GB . I found out in the Intel specifications that (not only) the i5 2540 and i7 2640 that are available in the T420 configurations support up to 16 GB RAM, however in the T420 specifications concerning those processors I found that only 8 GB of RAM are supported. AFAIK the memory controller is integrated in the processor in these cases, so is there another factor that limits the size to 8 GB, or is it only an improper information in the T420 specs?
View 9 Replies
View Related
Jun 18, 2014
Is it safe to swap hardrives that are running windows 7 between two t420's? I have read in the past that the OS is tied to the hardware and doing such a swap will cause errors or blue screen.
View 2 Replies
View Related
Apr 8, 2014
I think my attempt to update BIOS with a "BIOS update bootable CD" method has failed!
My laptop: Lenovo Thinkpad T420, i5 @ 2.5GHz, 4 GB RAM.
My old BIOS infos (taken from Setup before update attempt):
UEFI BIOS Version 83ET52WW (1.22)
UEFI BIOS Date (Year-Month-Day) 2011-03-24
Embedded Controller Version 83HT27WW (1.11)
I intended to update my BIOS to version 1.46 using "BIOS Update Bootable CD" from this link: [URL] .....
Steps:
1) I downloaded this ISO image: [URL] .... and burned it on a DVD-RW(DVD rewritable) medium.
2) I placed the DVD in my T420 and turned it off, then turned it on, select F12 (boot menu), selected DVD to boot from, and the BIOS update utility started.
3) In BIOS update utility I pressed "1" to read the instructions, then press "2" to update BIOS. I clicked "Y" to confirm and the update operation started. First it said " Now updating... ", then afer about 2 minutes, it said "Still updating ..." and it stuck like this.
So, right now, this message stays on my screen for about 1,5 hours(!!!):
"Still updating...
It may take about a few minutes.
<<< CAUTION >>>
Do not turn off the computer during the update.
Do not remove the CD during the update."
Other details (on system setup and current behaviour): AC was continously plugged in before&during BIOS update, battery is OK, no hard disk activity at all, keyboard is(seems) unresponsive, system's temperature is pretty high, but not dangerously high...
View 5 Replies
View Related
Jul 13, 2012
I have a wireless mouse and printer plugged into the USB ports of my docking station and generally have no issues with them functioning. However, when I take my laptop off the docking station and then return it to the docking station, the laptop no longer recognizes the keyboard and also says that the printer is not connected. Once I restart they both work. I have also tried to unplug the wireless receiver for my keyboard from the docking station and plug into the laptop, but it still does not work without reboot.
View 7 Replies
View Related
Apr 23, 2013
I purchased my T420 one year ago and have sufficiently "hosed it up" to the point I wanted to do a factory restore. I saved all my data then proceeded to create the CDs from the Q drive factory restore. I followed the instructs for more and more CDs and once I got up to #12 I noted that the time it was taking to create them was down from several minutes to several seconds. When I got to CD number 18 I thought "this is ridicules" and I popped CD 11 back in to look at its content (via Windows Explorer). I noted it had two folders: 1) Factory restore (or something like that) which was over 500 MB in size and 2) something about data. This "data" folder contained 1 KB of data. I then looked at all subsequent CDs (12-18) and they all only contained this data file. So, rather than continuing to make these (basically empty CDs) I stopped.
I then put the first CD in and rebooted the machine. The factory restore started and I swapped CDs until I got to 12. I put 12 in and it said the required data was not present and to insert the next CD. I did this until I ran out of the CDs I had created. I had to "X" out of the restore app and now when I boot I get nothing but a dimly lit screen and a flickering hard drive light! Am I totally hosed here? How many CDs would it have required had I kept making them? I am ( obviously) a novice.
View 3 Replies
View Related
Aug 25, 2013
I noticed a strange thing to my T420 - when SpeedStep is enabled CPU switches to lowest speed periodically which immediately affects performance. It switches to lowest speed even when CPU is at 100%. Then after few minutes it comes back to normal.
View 6 Replies
View Related
Jan 6, 2014
I received a T410 and worked two days on it. From one office I moved to another location and worked for some hours. After lunch I started the machine again, but neither touchpad nor keyboard is working. If I connect a pointer via USB on the machine the pointer is working, keyboard unfortunately not.
Ok. Admins installed it new. I worked one day, next morning same issue. Well, back to admins, reinstallation completed. Again for two days I could work without any problem. So as it happened the third time admins decided to provide me a new hardware: I received a T420. I have been working with this one week without any error.
I took the notebook home. I had been working with it for one hour. I used a USB-to-bluetooth wireless pointer. No problems so far.
I got back in the office this morning an guess what?!?!?! Same problem as for the T410: Windows is starting up but touchpad and kayboard is not working at all!
What did I? In my opinion nothing special:
1) Started up machine
2) Added pointer
3) Connected via WLAN to network at home (settings for Home-Network applying)
4) Packed the notebook into my suitcase and took the flight.
5) Back at the office connected via LAN to network, connected via VGA to monitor, added usb-keyboard, added pointer.
What can this be? I mean I'm able to destroy to different machines! Only common is Windows 7 and T4xx series...
View 1 Replies
View Related
Jan 25, 2015
I have a T420 Thinkpad and have 2 external monitors connected; one using VGA into the docking station and one using DVI into the docking station. The laptop does not recognize the mobile PC display as an option when I attempt to extend to a 3rd monitor. The ultimate goal is 3 monitors extended: 2 external and 1 (the laptop display). Is this possible?
View 3 Replies
View Related
Nov 7, 2013
I had an admin power on password on a T420 that contained a character that isn't allowed in the newer version (old password had a dash - in it) and I didn't remove the password prior to update so now I can't get into the BIOS as admin - are dashes changed to something else during update or can I revert back to a previous bios version (if so where are they located)?
View 2 Replies
View Related
Sep 23, 2013
we got several T420 with different BIOS versions (from 1.30 to 1.40) On 95% of them the "Clear Security Chip" Option is available @ BIOS but on some of them the option is missing.
View 3 Replies
View Related
