I've been using the Windows Vista (32) that came with my Inspiron 9400, now I'm going to (thankfully) upgrade to Windows 7 x64 and I'd like to know if anybody know (had used/ tested/seen) what would be the best and great driver for this nVidia GeForce 7900GS on W7 64.
I looked over nVidia website and there is currently no certified driver for this card + Windows version, so for what I see, we'll have to go either laptopvideo2go and mobileForce,
1) I'm ordering in a FX2500 to replace my 7800 go. I'm currently using Extreme-G Mobileforce driver 92.91 (I've tried some of the newer versions but prefer this one). Will this driver be compatible with the FX2500?
2) What are the best drivers for the FX2500 if not Mobileforce?
3) Overclocking... I've read the posts about flashing the 7900GTX bios to enable overclocking, does this mean i cannot overclock using the normal software way. In the Mobileforce drivers for the 7800, the option is in the Advanced Settings options in Windows. Does the FX2500/7950GTX not have this option and is BIOS flashing the only way to overclock the card?
4) If the BIOS flash is to enable voltage adjustments as well as clock adjustments, is this something I need to do or will the card do well with just altered clock speeds?
Could a few technologists in the know give me a detailed rundown on the primary differences between the three nVidia card options for the E1705/9400?
I quickly replaced my original X1400 with a dual pipe 7900GS but I am now interested in either moving up to a 7900GTX or a 7950GTX. I know I will also need to upgrade to the 130W or 150W PS as well.
I am looking for comparison information regarding memory, clockspeeds, pipeline counts, pixel/vertex units, pixel/fill rates, processing bandwidth, etc.
I am also curious about a good source for the purchase of any of these items. I have found one posting on eBay for a 7950GTX. I am interested to know if I can purchase directly from Dell, or save a few bucks by purchasing from eBay or a forum member. I also know I have read that there are equivalent Quadro (sp?) cards which will work in my machine. Are there any disadvantages to taking this route?
I know I could dig through a thousand plus posts on the topics and find all of the information I want, but I also know how much you guys thrive on expressing your technical expertise on subjects such as this ..........................
I'm attempting to upgrade my wife's 9400/e1705 but it's been so long since I gave a damn about mobile CPU's that I've forgotten which ones will fit and which ones won't.
I know she has a core solo 1.66 yonah, and I know it can fit certain T1** and T2**, and I know there's a screaming fast one out there, but I don't want to buy the wrong thing.
can I upgrade to pc2-5300 ddr2-667 with my current possessor also taking into consideration that i mite upgrade the cpu some day
How much ram can the Inspiron handle with the latest bios update will i need a new psu to power such upgrades feel free to fill me in on anything i'm missing here
I'm looking at some Mushkin pc2-5300 ddr2-667 2 x 1gb
Is all or most 5300 667 supported by newest bios I found cheap ram made for imac can i use mac ram in a dell
I ran Win7's Upgrade Advisor and got a couple flags on Inspiron 9400's hardware. But I've heard that people have nstalled Win7 on them (with mixed results).
A couple reports on graphics malfunctions, and someone said the Sigmatel drivers were not found.
I wouldn't bother, but I have a couple development projects that require Win7.
Wondering if anyone has had good luck with Win7, and whether there are certain things to watch out for. All drivers work OK? Did you install 32-bit or 64-bit?
It's been over two years since the last update, but Dell finally released a patch for the faulty nVidia graphics chips to help delay failure. That's the only fix listed in the A10 release. I wanted to let everyone know that if you have an nVidia graphics card in your E1705 or any other laptop from 2006-2008 you should check for the latest BIOS update because these cards have faulty thermal design that causes overheating and failure. The symptoms are odd colored pixels, video flickering, rebooting and system crashes, program crashes, odd lines on screen, etc - once you start to exerience this it's already too late, your chip is damaged and needs to be replaced. Likely, at this point, every system out there is probably already experiencing some form of failure so to be safe, if you're still under warranty, I'd use it to get a new card as soon as you can and apply this BIOS update. Anyway, you can find the BIOS update here:
I have a Dell E1705 / 9400. I want to upgrade RAM. Currenly i have 2 * 1GB 667 MHZ RAM. I want to upgrade to 4GB. Will my laptop support. I want to upgrade to maximum frequency ram. 800 Mhz or more. If its available.
After reinstallation of drivers on my Dell Inspiron E1705 after a reformat, im getting a yellow question mark next to network controller and video controller what are the drivers i should install?
2.13 core 2 duo, 2gig ram, 100gig 7200 rpm hd, 1920x1600 true life screen, 7800go gfx which I purchased in June 2006. I am in the UK so this cost me £1100 from the Dell outlet.
During December 2007 it has had 4 service calls where the motherboard, graphics card, and lcd have been changed 4 times with the same fault occurring (lines on lcd).
Dell have kindly agreed at my request to swap the laptop for a new 9400, but as the 9400 is no longer in production Dell said they will give me a similar spec 1720 instead, which was nice of them and I agreed. Here is the spec for the 1720:
All seemed fine but slower hd which I can live with (just about).
I then started doing some research and discovered the 8600 is slower than the 7800 I had? and the laptop has no DVI port! I used to connect the 9400 to my external montior and sometimes my HD TV using the DVI and will miss it dearly on the 1720.
Would it be unreasonable for me to ask for a higher spec machine over the 1720?
My friend just told me he heard this was true. Can anyone confirm? I know there are 2 different brands of LCDs floating around in the E1705/9400. A Samsung model, and a Phillips. However he claimed that the M1710 used one different than the E1705/9400, and was a blazing 30% brighter.
I have a Dell 17inch E1705/9400 notebook and Vista home. I recently purchased a [url]Samsung DVD burner. I replaced the stock one, and once I turned the computer on the OS does not detect the new drive at all . The drive will not open when the button is pressed, but the power (reading?) light is on ALL the time. I do not hear the drive making any noise, only at startup.
My Inspiron 9400/E1705 case is getting a little banged up and I was wondering if it's possible to use a M1705 case (bezel, palmrest, base, etc). as a replacement.
I got a Dell Inspiron 9400/E1705 here that will not boot. The owner said he put into hibernate and went home, when he came in and turned it back on it was sluggish for about 10 minutes, he powered it off and then it would not power back up.
When you turn on the power the power and HD lights come on, you hear what sounds like the HD doing some movement and then it shuts down in a few seconds.
I removed the HD, ram, dvd, wifi, modem and tested it with same results. Also took out the CMOS battery to try to reset the BIOS and put it all back together and same thing.
CPU fan does not spin at all on power up, not sure if this model is supposed to do that little 5 second thing most of them do.
No beeps, nothing on the screen, etc.
Is there a way to determine if its the motherboard OR the video card, as this has a discrete video card, not integrated. Would you get any kind of system response if the video card was dead but the motherboard/cpu was ok ?. I would rather replace one and not both if I can tell which to go after first.
My 7950GTX failed and all replacement cards I've seen on Ebay, from the X1400, 7900GS or better are overpriced.
Since I won't be gaming with my laptop anymore, I was thinking of replacing my motherboard with the one with integrated onboard video, which is more cost effective.
Do you know if it fits, meaning will my current LCD connector fits this motherboard ? Should I expect a bad surprise?
 I don't have the ssd msata option in the laptop I just purchased from Newegg so I decided to buy a samsung 840 250g ssd and do a clean install of win 7.Updated ssd to latest firmware, disabled secure boot in bios, sata was already set to ACHI, installed ssd and started loading win 7. It would get to the point that the tiles are floating around and it says "starting windows" and then locks up. Tried this several times and same thing.
Finally tried changing boot mode from eufi to legacy it works fine. I got win 7 installed. Now if I try to go back to eufi boot mode it just goes to a black screen (on start up) and displays detecting media (or something like that).So I guess my question is:
1. Why did I have to switch to legacy mode to begin with
2. Does leaving it in legacy boot mode affect performance?
One last thing, since installing win 7 I have been unable to install the nvidia drivers downloaded from dell for win 7. It either starts and immediately fails or it installs a little then I get a blue screen and the computer reboots.
i have Dell Inspiron 9300 With Nvidia Graphics card
I recently installed Windows 7 Ultimate
From Device Manager: NVIDIA GeForce Go 6800 Driver Provider: NVIDIA Driver Date : 3/6/2009 Driver Version : 7.15.11.7967 Digital Signer: Microsoft Windows Hardware Compatibility
On scanning from Nvidia website: Product : NVIDIA GeForce Go 6800 Current Installed Driver : 179.67 Latest Driver Update : The manufacturer of this system requires that you download the driver for your GPU from their support site .....
I recently purchased this laptop and I have no alternate nvidia drivers, when installing i get the error message no compatible hardware found. I have already tried adding my device to the .inf list with no success, i might be doing it wrong?Â
Both intel HD 3000 and nvidia GT 625M drivers are listed on my product driver page but i do not know if I'm limited to what comes pre installed.
I recently got a Dell Precision M4300 from a friend and had a few questions.
When i got the laptop, I reformatted the Laptop and Reinstalled Windows XP Pro SP2. I proceeded from Microsoft to Update to SP3 and so on.
Well I also Went to Dell's Website and downloaded all the necessary drivers (using the service tag) for this laptop and installed them.
Now here is where I ran into a problem,
When I installed the NVIDIA drivers for the NVidia Quadro FX 360M video card, everything seemed to go fine. Then I rebooted the Laptop, and now every time I reboot, my hardware acceleration is defaulted back to None, and it gives me multiple pop ups about this issue. I go into the settings and turn the Acceleration back to full and it goes away.
This is a major problem, and is really frustrating to deal with everytime the laptop is booted up.
My other problem, is when I open up Internet Explorer, It tends to lock up the browser for no reason when Loading a website. I then CTRL+ALT+DEL and attempt to close iexplore.exe via the task manager. It closes the browser but does not shut down the browser, making it impossible to browse, so then I have to reboot.
here are the specs of the PC, from the device manager and drivers I have gotten
Dell Precision M4300 NVidia Quadro FX 360M 512mb Video Graphics Card TSST 8x dvd+-R burner 120GB Hard Drive 3.5GB of Ram 2.5GHZ T9300 Core 2 Duo Processor 1394 Port 2 USB ports External Monitor Ports Wifi Support Bluetooth Support Windows XP SP2 Pro
Having geforce go 7900 gs 256 Mb (17 inch, 1920x1200) died after 2 years of using it, but played only moderately. I noticed sometimes GPU was over 80 C. No more warranty, so I plan on getting a replacement.
7900 gs is 20 Watt current consumption. There are cards like 7900 GTX, FX2500M tht have 45 Watt. So roughly we could expect twice as much heat made if replaced to a 45 Watt card. Am I right here? Now, even 20 Watt card (7900 GS) was overheating with only single heat pipe. 7900 GTX or FX2500 would have to have for sure 2 heat pipes, but since we have twice as much heat, do we have the same situation?
What is your experience with 45 Watt video cards in Inspiron E1705 / 9400 ? Do they overheat (and break) as often as 20 Watt and single pipe cards?
And second question - reliability of refurbished cards or "working pulls" How long can they last? I know it all depends, how the previous owner was using it, etc. When buying used card, what possibly was overheated more? 20 Watt single pipe or 45 Watt dual pipe (like the question above) I would appreciate any oppinion and experiences from you.
In the future, I plan to better take care of cooling, remove dust more often, use AS5 paste, fan control, use dual pipe. Anything else can be done? Maybe going to 20 Watt with 2 pipes - would probably cool down system the best.
I have this Dell e1705 Core 2 Dou, 2 GB Ram and an ATI video card. I've been buying Nvidia's GO 7900 GS off ebay. some of them arrive here dead. the rest arrive, they work for 1 hour and then become like the rest, lines on the screen, color blinking, in windows, the Bios, and even in safe mode, I put my ATI back and everything works fine, only two of the 6 I got worked for like 1 hour, 1 just stopped working completely, and the other one that I bought a week ago worked for 1 hour then red flickers and pixels started appearing on the screen then it got messed up completely like the pictures show.
Is it possibble that its the mainboard, or any short, and why just Nvidias and not the ATI. I think I just have bad luck with the cards I bought.
Does anyone know if Dell modifies the video card drivers that they post on the driver download website specifically for their machines?
Or do they just download the latest drivers from the Nvidia webiste test on a particular machine for a little while and either pass or fail the driver for official use?
