I am hoping someone can point me to a driver to get me out of trouble. Have tried a few and spent plenty of time rebooting in safe mode to roll back.
I have a M1330 and have installed XP on it. It has been running a dream for 8 months but I have just hit a snag.
Every time I watch a Flash video in Firefox, the touchpad's vertical/horizontal scroll stops working, and I'm sick of having to reboot every time I'm done watching Youtube.
View 4 Replies View RelatedI've just installed 178.13 (vista x64) drivers for my m1330 and it's got FAR FAR slower in any games I run on it.....
Got the drivers from laptopvideo2go as the Dell one's are really old- how comes these newer one's do not work with the M1330?
Where can I download Windows 7 drivers for the xps m1330? All I see in the drivers sections are for vista. Will Vista 64bit drivers work?
View 15 Replies View RelatedI finally got the hack for the STAC9228 drivers working. Should work with M1330 and M1530,
You can find the driver and a readme here:
[url]
Recently I've been having trouble with my M1330's GPU overheating. It's been idling at 70-85C and can sometimes get past 100C when under load.
Since I'm going to be in Japan for the next few months, it doesn't seem like there's a simple way for me to send my laptop in to get a new GPU or motherboard, if that's the issue.
So I've been trying various things to try to reduce the temperature. I bought an aluminum laptop cooler with 3 fairly large fans on it, but it hasn't had any significant effect.
I also downloaded the latest BIOS, since I heard that the newer ones increase the fan speed.
I finally got the hack for the STAC9228 drivers working. Should work with M1330 and M1530, if so, please send me a short email with the tested configuration!
You can find the driver and a readme here:
[url]
Was having an issue on bios A12 (I think it was) with the brightness (function keys were not adjusting it properly), so updated the bios to A15 and the latest intel drivers as advised. (have intel, not nvidia).
Now the screen on boot is either blank or with only blue lines.
Can hear it booting into windows so the system on the whole seems fine.
Have got it working successfully on an external monitor via the vga port. I have tried to reapply the A15 bios and reinstall the intel drivers but not changed anything. The display properties in windows shows the laptop monitor as stuck on 640x480 and low colours. screen is off on 640x480 and if upped to the only other option 800x600 gives blue lines.
I actually have TWO 9-Cells, and they are both drain pathetically fast, whereas when I got it in August 2007, they lasted at least twice that.
View 10 Replies View RelatedI have an XPS 17 L702X. I just did a re-install of windows 7 on my wife's laptop. How do I use the drivers and utilities disc to get the drivers for the hardware on this computer? I can't get online on it. I do have the discs.
View 2 Replies View RelatedDoes anyone know if Dell modifies the video card drivers that they post on the driver download website specifically for their machines?
Or do they just download the latest drivers from the Nvidia webiste test on a particular machine for a little while and either pass or fail the driver for official use?
I recently installed windows 8.1. But i dont find drivers for bluetooth at in the list of drivers available at website.
This is the link of all available drivers
[URL]...
which r better in ur experience for the GeForce 9600 M GT FTW?
View 9 Replies View RelatedI own a Dell 7520 and it has four 3.0 usb ports. However, I have discovered that one program I use does not support Intel 3.0 USB ports only USB 2.0 ports. So the only port that program will use is the Realtek USB card reader on the 7520 because that is a native 2.0 port.
According to a poster Innogen on the Intel support forum "The BIOS in my Dell Inspiron 7520 allows me to disable it so that the USB 3.0 ports revert to USB 2.0 functionality." but I can't find any such functionality in my BIOS (using version A06).
[URL]
I tried uninstalling the Intel USB 3.0 drivers in WIn 7 Ultimate hoping that when I rebooted it would install USB 2.0 drivers but it simply reinstalled the USB 3.0 drivers.
I would really like to get this program working on my computer and while I am not happy about losing USB 3.0 functionality I can live with it until the vendor gets its act together and starts to support Intel USB 3.0.
Lately my laptop would freeze and I could see faint white lines only at the top of my screen. (lines do not go all the way down) This has happened twice in a day. Ctrl Alt Del doesn't work so I have to power down the system and it runs normal after that.
I'm really afraid its the dreaded vertical lines issues. I had my mobo + GPU replaced a year ago, still under CC warranty but its such a pain.
I am wondering if anyone know whether dell fixed the video card and heating issues (like many in this forum mentioned) yet?
I am very interested in this machine but I don't want to risk buying something that would burn out later. I am also interested in the new studio XPS 13 as well though I would love to know how it handles heat and the video card (i hate burned-out video cards..
i have been having problems with my xps m1330 ive had it for 3 years now and its been decent to me... 3 months ago when my warranty was up i sent it in to get the gpu and mother board replaced because of the warranty. Just recently it started acting up bad...
Would freeze left and right start running check disk when i tried to restart it...so i decided to reformat it seeing some scan i ran in dos was saying i was missing a system file. So i cleared the c drive and installed vista fresh... re-put my 60gb of music over and everything seemed fine for 2 days... not today it froze up on me ... i tried to restart and got a blue screen that flashed to fast to read and i tried to restart again and got a 2000-0141 error and alot of beeping and crap... so i restarted it and it was gone...
I've had my M1330 for about 1 1/2 yrs now. The first issue is that at one point 3 months ago,
I was being randomly electrocuted by my laptop when I placed my hand on the open space below the keyboard. About a few days after the random electrocution started, the battery died, and won't recharge at all.
Lastly, there is a constant whistling sound that was coming from the laptop ever since I bought it.
I'm out of warranty. Am I able to buy a new warranty for my laptop at this time or is it too late for me? And if it is too late, should I attempt to make repairs through Dell, or am I better off selling the laptop,
and then use the cash towards a lower pc, like those mini/EPC's that these companies are selling now?
Does anyone know if I can install 8 GB of RAM in my M1330? I now have 4 GB, but when upgrading to 64-bit I'd also like to add some memory.
I bought the computer in August 2008, and have the latest bios.
I think 800 MHz is the max speed I can use, does anyone know about any modules that will fit, if possible
First of all thanks to everyone who contributes on this board. The knowledge I gained is invaluable.
I upgraded from a T5800 dded Arctic Silver 5.
recently I've installed nVidea driver from MS windows update ,then the fan is always run, then I installed nVidea driver from dell support site, but still same thing.My bios is A09 ,
and have I to update my BIOS to A15 ? or keep it A09 ,because I thing it will afect the battery run time (i.e the fan need more energy and then battery need discharging quickly)
I recentley just formatted my M1330 and installed the AHCI driver but i am still getting BSOD right after the green bar on start up? The only way to get around this is to disable AHCI and enable ATA from the BIOS. Is there a solution to this
View 4 Replies View RelatedI have a new XPS M1330 on the way. I originally purchased a refurb. M1330 and had a few issues with it and dell agreed to build me a new(non refurb) one with same specs. (crimson,T9500,LED display,4GB's ram,vista ultimate etc.). In the meantime my company has ordered us new latitudes and I don't really see need to keep the new 1330. My question is, when it arrives should I not even open it and sell it either here or E-bay and my second question would be how much could I expect to sell it for ?
View 10 Replies View RelatedMy 1330 is my second XPS after owning the Origional 9100XPS tank.
I have the fully built M1330 with the best factory options Dell offers. Running Windows Home Premium.
I was very pleased with my PC however, I didn't like all these extra features taking up room. (Media Center, Back-up HD, ect)
So, after a little thought, I did a complete format of my HD. I removed all the other Partitions and only loaded the OS.
After doing the updates, re-installing my McAfee Suite, Office 2007 and the other basics; This computer is NIGHT and DAY compared to what it was.
It was never a slouch by any means but I can't even explain how much better it runs now.
For anyone that doesn't need the silly stuff. I HIGHLY suggest you take the time to clean sweep your HD and reinstall from scratch.
I have a Sony Vaio VGN N130G with an
integrated Intel PRO/Wireless 3915ABG wireless or
Intel PRO/Wireless 3945ABG that runs the standard sony driver.
I also have a Dell Inspiron 6000 with a Intel PRO/Wireless 2200BG that runs the driver for Intel Proset/Wireless driver .....
This one looks bigger than the original m1330 battery, so I was wondering if it will fit.
I`ve also heard about Mugen Power
who makes a lot of batteries for electronic devices, anybody got any input on that?
Poll because I'm curious for NVIDIA users only
View 10 Replies View RelatedI wanted to change my hard drive back to my original one and it turns out that when I first changed it in May I have screwed the low quality screws too tight. When I tried to unscrew them again, 2 of them (the ones that are towards the middle of the laptop) failed to unscrew and I pretty much turned them unusable with my repeated tries.
I'm not going to rant about the fact that Dell could actually use STEEL screws to prevent this type of thing, I'm just going to ask you Dell XPS M1330 owners if there's any other way around getting the hard drive out.
If I'll unscrew all other screws, can I take my XPS apart? Is there anything I should be particularly careful with (other than unscrewing the low quality screws that is)? Or do you have any tips on how I could unscrew the faulty screws?
I've owned a Dell XPS M1330 for about a year and am very happy with it. I want to buy a laptop for somebody as a gift, and I was thinking about the Inspiron 13, which I never actually saw. I know it's basically the lower quality brother of the 1330, I'm just wondering how lower the quality is.
Can any of you Inspiron 13/M1330?
I bought my M1330 a few days ago and am just waiting for it in the mail. I'm not so sure if I should downgrade to XP as I have heard that Vista is becoming more stable now that SP1 is out. First, my setup:
Intel Core 2 Duo T9500 (2x 2.6GHz) Processor
3GB 667MHz RAM
500GB HDD (5400 RPM afaik)
LED Display
128MB NVidia 8400M Graphics
9-cell battery
My intentions are to run a TrueCrypted system that can run for as long as possible.
For those that don't know and are too lazy to look further into TrueCrypt, it essentially completely encrypts a hard drive so that it requires a password to boot into the operating system. Because of this, everything that goes on while the system is running has to have real time encryption and decryption. This adds strain to the CPU.
What is your opinion? Should I downgrade to XP for the speedier system and longer lasting battery life, or won't it make much of a difference? For those who are running XP on their M1330, do you like it? What is the general difference between XP and Vista?