I recently received my Dell Studio 1535 after my motherboard on my inspiron 9100 fried. The lcd screen on the 9100 is much better (1680x1050) than the 1535 (1280x800), also i hate glossy screens. After reading this thread
[apparently i cannot post links yet, just search "LCD Swap m1530" in this site and you'll get it right away.]
I was hopeful that i would be able to swap out the 1535 screen and put in the screen from the 9100. I got both successfully removed, but kinda got stuck with the inverters and all that stuff, and got scared because i don't want to break anything. The thing that confused me the most was that the 1535 lcd plugged TWO things (power i think?) directly into the inverter, whereas the 9100 has only 1 thing that plugs directly into its inverter. It seems pretty clear that the original inverter has to be the one the computer uses based on all my googling of this subject, but how can i do that if it doesn't plug into the inverter the same way? can someone please offer me some help in this? i would have like to have contacted the original poster of the thread i linked, but of course, no contact information was available in his profile I may post pictures if i decide to take it all apart again. At the very least, can someone confirm or deny that it would be possible to make this swap? i will be very disappointed if i'm stuck with this low res screen forever...
Well people in my country is summer, and from some days (4-5 days) my Studio 1535 has annoying for me HDD and GPU temperatures.
I will attach old picture and current picture and you can compare the temperatures. Plus the fan stays on higher speed and it just don't want to turn itself back to normal light speed mode, I guess because high HDD and GPU temperatures.
My left mouse button on my touchpad of my dell studio 1535 was loose, so I opened up the bottom case to SEE if there was anything I could do.....
I QUICKLY determined there was NOT anything I could do, so I closed it back up and turned it on....ONLY it did NOT turn on....NOTHING...no screen, no lights, no noises....and the battery is fully charged and I tried with the power cord plugged in.....
I bought new Dell studio 1535. with 4gb ram, 2Gcore2due etc. My webcam setting isnt right. (i am in my room's bright environment) see this is the picture takken with default settingz with this default settingz. even if i increase gamma and brightness,, then quality is shaky. anybody tell me the exact settingz.
I am just not satisified with this laptop. I paid €1200 euro at the time, and in return got a somewhat unstable system. Windows had this bad habit of crashing often, and not shutting down correctly, until I upgraded to Vista 64-Bit.
I am although, happy with the 4GB of RAM, and graphics, you get what you pay for with them, although the Graphics card is the main reason I am going to purchase a new laptop as my gaming is going to have to go mobile in boarding school soon.
Anyway, the silver casing I bought my laptop with is just unsatifactory. I had it sent back twice for cracked lid hinges, both sides. Now this is the third lid casing I have had, seems to be okay, hinges haven't buckled yet, but the plastic is still flimsy, cheap and very very badly painted. I have had this new lid on for 2 weeks now and the paint is already starting to scratch and peel off above the LCD, and is damaged and quite scratched on the palm rest, although that is to be expected.
I have had a problem with the sound twice. It randomly decides not to play through the speakers, unless I apple pressure to the bottom left of the laptop with my left palm. Got the motherboard replaced twice yet this has only been improved but not prevented.
Sounds like a loose connection or bad fitting issue to me.
Lastly, the media keys above the keyboard, ALWAYS freeze. The keys have been replaced twice to, but still it has not been fixed. Every time I turn on the laptop, whether booting into Vista 64-Bit or XP Professional, it happens. Eventually it resolves itself, but is a major annoyance, especially when it decides it doesn't want to eject my disc, and freezes up as a result when I try to eject it by right clicking "My Computer".
Oh, and to top it all off, the keys on the keyboard tend to flick upwards and appear to almost break off, I had a problem with my "K" key coming half loose once.. Not re-assuring.
Sorry to be a pessimist. Just expressing my opinions, not forcing them upon you. Similar stories or opinions are welcome to be posted in this forum. Also, I do not know, but have these problems been resolved in the 1555?
I am having MAJOR issues with my Studio 1535 and I could use some input!
About two months ago, the fan kicked on at HIGH speed as soon as I pressed the power button to boot up. It continued to run on HIGH indefinitely, unless I lifted one of the rear corners a bit off the desk. Then the fan would stop instantly until I lowered the edge back down to the desk surface.
I've spoken with a few other 1535 owners who've had the same issue. Motherboard flex seems to be the culprit and it (the system/mother board) needs to be replaced.
I sent it in for warranty repair the first time with a detailed explanation of the problem. I also detailed a problem I was having with the keyboard that needed to be fixed. They replaced the keyboard and didn't address the fan issue. Immediately out of the box, I powered it up and the fan instantly kicked on HIGH, too.
I sent it back a second time with a detailed explanation again (after a long chat with tech support). They replaced the fan itself. I got it back yesterday and as soon as I hit power, the fan kicked in at HIGH speed. Making matters WORSE, the system gave me an error during the boot sequence that it didn't recognize and couldn't charge the battery! It allowed me to ESC out of the error and booted to my desktop. That's when I realized the Touchpad wouldn't work at all! I had to connect a wireless mouse via USB to do ANYTHING!
To add insult to injury, there's an inch-long scratch on the Midnight Blue lid that wasn't there the last time I sent it back!
So now, I've got the FAN/motherboard issue, some sort of Battery problem AND the Touchpad doesn't work! The scratch is the least of my worries...
Right now I'm posting this from a friend's netbook, for the record.
So, this is something of an emergency. My Studio 1535, as the title says, is not starting. When I first plug in the power cord, the small white light turns on for just a second and then turns off again.
Normally it stays on while plugged in.
When I press the power button, the white ring of light around the button turns on like normal, and the media buttons flash in sequence, just like a normal boot.
Unfortunately, this is where it stops going as usual.
asked over at Dell forums but I expect I'll get better responses from the fine minds that browse these boards
I bought the 1535 last year with Vista Home Premium 32-bit. I will be getting Windows 7 Home Premium 64-bit on October 22 - assume I'll only have upgrade media for the time being. Here are my questions:
1. Where would I find the correct drivers? Should I just use the Vista 64 drivers for Studio 1535?
2. If I had to format my HDD for some reason, would I be able to re-install Windows 7 with Upgrade media? I've read that the installation will ask for my Vista install disc - will the one that Dell supplied work for this?
I've had a Dell Studio 1535 for a couple months now and have had no problems with it at all. In the past couple weeks I've been backing up my dvd's and have done them all so far succesfully until now.
I put a blank dvd disc into the slot loading drive and it sucked it in just like it does every time. When I click start to begin burning I get a message from the program that there is no disc in the drive.
I go into my computer and right click on the e: drive and select "explore" and it says "please insert a disc into the drive". So for some reason the blank dvd disc isn't being read and the computer doesn't acknowledge that there is a disc in the drive. I've tried many methods to eject the disc but all have failed........................................
I would like the better graphics (even the integrated graphics), but can't determine which model is which at dell.com (not looking for an outlet purchase, just a regular new computer).
Also, can someone tell me the differnces b/w the 1535, 1536, and 1537? I am not a gamer, outside of an occasional game here or there (nothing too crazy-i.e. I have never bought a game that cost more than about $20 for context)...............
The processor (Core 2 Duo T5750) is idling at about 54-57 C which I gather is relatively high. Is there anything I can do about this? I ran ORTHOS with HWMonitor and the peak temperature is about 64 C for both cores.
In general, it's not too hot of a laptop, but when stressed, sometimes the area to the left of the trackpad gets unbearably hot.
I'm considering a cooling pad, but preferably nothing too expensive or obscure.
I have one of the older Studio 15 laptops (aka the 1535) and the battery I'm using now barely lasts an hour and Windows 7 is giving me a notification saying that I should "consider replacing my battery."
In the last two weeks or so, the fan on my Studio 15 (1535) has been running continuosly. Even when it's under little/no load for extended periods of time, the fan stays on at higher-than-low-speed (from the sound)?
I've had it for about four months and this wasn't an issue until very recently. I have updated the BIOS twice (A02 to A03, then A03 to A06) and wonder if the most recent update was the culprit. I skipped A05 initially, but a few days ago I re-flashed using A05 to see if that might fix the issue- no dice! I'm debating whether I should go back to A03 and see if that does the trick?
But I don't want to keep arbitrarily flashing the BIOS over and over if there's no chance of it fixing the fan issue.
Anyone else have similar issues with the fan running constantly? Any suggestions on how to fix or, at least, mitigate the problem?
FYI- I always use the laptop on a flat, hard surface (desk or wooden lap-desk) to allow proper heat dissipation. I have also tried elevating the back of the system by 1/2-inch or so to improve airflow- NADA!