I've had a Dell Studio 1535 for a couple months now and have had no problems with it at all. In the past couple weeks I've been backing up my dvd's and have done them all so far succesfully until now.
I put a blank dvd disc into the slot loading drive and it sucked it in just like it does every time. When I click start to begin burning I get a message from the program that there is no disc in the drive.
I go into my computer and right click on the e: drive and select "explore" and it says "please insert a disc into the drive". So for some reason the blank dvd disc isn't being read and the computer doesn't acknowledge that there is a disc in the drive. I've tried many methods to eject the disc but all have failed........................................
Recently (as in, the past couple of months), my touch-sensitive media panel has been having some issues above and beyond the common complaints of the sticking eject button. Don't get me wrong, it still does that, but it adds something new to the mix:
More often than not, the eject button does not function at all, even after it unsticks itself.
Once I boot up, it sticks like normal until I boot into Windows, then attempts to eject about 10 times, and then stops. However, most of the time, it will no longer eject when pressed after this. Touching the button will cause it to illuminate like usual, but the DVD drive does not respond, regardless of whether there's a disk in the drive or not.
Sometimes, it works just fine for hours on end, ejecting every time I press the button. Sometimes it starts out working, but I'll come back to it half an hour later and it will no longer function.
Also worth noting is that when the capacitive eject button does not function, neither does the Fn+F10 keyboard shortcut.
I don't believe it's an issue with the DVD drive itself, as I can still eject via software while this happens, by going to My Computer, right clicking the drive and selecting "Eject" (although this occasionally causes an instant Blue Screen of Death).
However, I don't believe it's a touch panel issue either, because I've had the entire panel and ribbon cable replaced by Dell, and there was no difference. Also, all the other buttons (volume, playback controls) work perfectly when the eject is not sticking.
I also doubt it's a keyboard issue, because this started happening with my old keyboard, which I later replaced with my current backlit keyboard, but the Fn+F10 shortcut still does not work when the eject button does not work.
With all this, it left me to believe that the only thing it could be is software, so I completely reformatted the hard drive, left no partitions intact, not even the Dell Recovery partition, and re-installed Windows Vista 64-bit from scratch, but as luck would have it, it was doing exactly the same thing within 30 minutes of loading Windows for the first time.
I am really out of ideas here. I just can't think of anything else that could possibly be causing this, unless it's an issue with the DVD drive itself, which as I said earlier, is unlikely because ejecting via software works. Also, Dell refuses to replace the DVD drive anyway after I sent them basically this exact same message, because they "do not believe that there is a problem with the DVD drive".
Any ideas on why this might be happening? If it were just the regular sticky eject button, I would not be bothered as long as it worked as normal once it stopped sticking, but this is not the case.
I've been patient, I've been calling Dell, but my problems with the laptop are still there. I was wondering if there's chance to have a 1535 or 1537 w/o any troubles. I'll list mine:
I received my Dell Studio 1737 only a few hours ago and the immediate problem I've found is that Fn+F10 and the eject soft touch button don't eject a CD whilst in Vista. They work fine in the BIOS or Diagnostics Utility but don't work when the machine boots up into Vista.Â
BIOS is showing as A04 and the latest available on the Dell Drivers website is A02
iv installed windows 7 in bootcamp and set it as the default OS. now,i cant find how to eject the window 7 install disc, as the eject button dont work. also, i cant find out how to get back to osx?
i got a studio15 laptop on 25th of feb. after 4-5 days it start giving me the eject button problem on start up. the button remains on for 2-4 minutes and the touch panel:confused does not work. i contacted dell for the problem, they recommend me to update BIOS, but does not work.
Hi I am new to this Forum and new to laptops I have just purchased this machine, DELL STUDIO XPS M1640 Core 2 Duo 2.93GHz ,500GB,
4GB I got it new on ebay. It arrived today and everything is fine except it won't eject CD's using the highlighted touch button.
I have to go into computer and eject from there.
The machine is running Vista Ultimate. I have contacted Dell and I have to transfer the machine to my name and extend the warranty before they can help. I thought I would ask here first
I just bought new laptop Studio 1555 and eject key never works, now if i need to eject the CD i have to goto my computer right click on CD drive and eject,Â
i try to connect dell support but no luck, why this eject key not working ? is that a hardware issue or something to do with window 7 ?
The CD will play the songs etc... but it wont eject the disc. Tried soft key on the "UBL + srs Premium Sound panel" above Key Pad, plus tried using software bottons ie... In "Media Centre", Right clic in Explorer+eject...etc...
Sounds like it tries to Eject but can't..... Don't want to dismantle the hole laptop to get at the CD/DVD Drive.
1. Eject Button - I can't get either the eject button (near F12 key), or the touch eject button (that lights up) to eject any CD's. I have to go into My Computer, and right click ...and then eject it that way. Anyone know of a way to get the eject buttons to work? Should be able to use one of the eject buttons.
Note: I did try the holding the power button if for 30 seconds, and then rebooted. This didn't work for me.
2. Brightness - what FN + ? key adjusts the brightness of the screen? When the AC cord is plugged in, it's bright. When I disconnect it, it dims. I'd like to adjust the brightness to where the screen is the same brightness when it's on either AC or Battery.
I recently updated my OS to Windows 8 but the Eject key on the keyboard doesn't work. I thought the problem would be solved by installing QuickSet but still the same. All other media keys (change display, wifi, battery, brightness, mute, volume etc) are working perfectly except the eject button.
It is an automatic drive. My computer says the bluray drive is working right. Tried right clicking and ejecting and hitting the eject button. It is an automatic slot drive. Tried windows software to find problem and it couldn't work either. It worked just 10 mins before it happened. It is a windows 8 pro OS. HL-DT-ST DVDRWBD CA10N is the drive windows calls it.
I've had my Studio 1555 for awhile now, and all is has been pretty fine. However, I just noticed that my eject button for the disc drive has stopped working. I rarely use it, but I have used it before.
I upgraded my bios today from A06 to A08 and went to install my new bluetooth mouse, and the eject button just does not respond at all. I can eject the disc from my computer > right clicking the drive and selecting "eject" so it's definitely the button.
I'm not sure if this is related to the bios upgrade or something else.. Computer spec's are in my signature and I'm running Windows 7 Professional, clean install.
The touch sensitive eject button on my new Studio 15 laptop appears to be stuck on. When I reboot the laptop, the media control lights flash back and forth as normal. However, the CD drive immediately ejects and the eject button light stays permanently on. This all happens the second the laptop comes on - long before it boots into Vista. This makes me suspect a hardware rather than software issue. Â None of the other touch sensitive media controls work. Â I've tried cleaning the button, checking for dirt under and on the button and rebooting the laptop. I also rested it overnight. Â I only got the laptop on Friday.
Well people in my country is summer, and from some days (4-5 days) my Studio 1535 has annoying for me HDD and GPU temperatures.
I will attach old picture and current picture and you can compare the temperatures. Plus the fan stays on higher speed and it just don't want to turn itself back to normal light speed mode, I guess because high HDD and GPU temperatures.
My left mouse button on my touchpad of my dell studio 1535 was loose, so I opened up the bottom case to SEE if there was anything I could do.....
I QUICKLY determined there was NOT anything I could do, so I closed it back up and turned it on....ONLY it did NOT turn on....NOTHING...no screen, no lights, no noises....and the battery is fully charged and I tried with the power cord plugged in.....
i`m new herenot to the laptop world i been upgrading laptops for over 3 years now so i`m no rookie but i always like to ask and rethink what i already know;
so now i just got this STUDIO 1535 its new but no box no warranty but i got it for real cheap dont ask
WINDOWS VISTA HOME PREMIUM 64BIT T5800 2.0GHz AT 800MHz FSB INTEL MEDIA ACCELERATOR X3100 320GB 5,400RPM 4GIG DELL RAM
WC3 is running with average of 45 fps with the ATI HD 3540 GPU.
My other laptop has the same CPU, less ram but have GF 8600M GT and the game runs with 100 FPS. I was wondering why is that big difference between the two GPUs:
i got mine in july and then in september the screen suddenly just went blank and the whole laptop just died.
It wouldnt turn back on and so Dell replaced the motherboard. Laptop came back and worked fine. But then all of a sudden it kept cutting out randomly again but would switch back on.
But then on saturday it cut out and now wont turn back on again. So will have to be sent off again now!
Anyone heard of this problem before? Getting very anoyed by it
Also sometimes the speakers just wont work at all and the CD drive button stays on and keeps trying to eject a disc even if there isnt one in there!
Saw one of these poll threads over in the hp forums regarding the HDX16t; thought I might start one for the Studio 15's since many people (including me) are experiencing problems with them.
I recently received my Dell Studio 1535 after my motherboard on my inspiron 9100 fried. The lcd screen on the 9100 is much better (1680x1050) than the 1535 (1280x800), also i hate glossy screens. After reading this thread
[apparently i cannot post links yet, just search "LCD Swap m1530" in this site and you'll get it right away.]
I was hopeful that i would be able to swap out the 1535 screen and put in the screen from the 9100. I got both successfully removed, but kinda got stuck with the inverters and all that stuff, and got scared because i don't want to break anything. The thing that confused me the most was that the 1535 lcd plugged TWO things (power i think?) directly into the inverter, whereas the 9100 has only 1 thing that plugs directly into its inverter. It seems pretty clear that the original inverter has to be the one the computer uses based on all my googling of this subject, but how can i do that if it doesn't plug into the inverter the same way? can someone please offer me some help in this? i would have like to have contacted the original poster of the thread i linked, but of course, no contact information was available in his profile I may post pictures if i decide to take it all apart again. At the very least, can someone confirm or deny that it would be possible to make this swap? i will be very disappointed if i'm stuck with this low res screen forever...
I bought new Dell studio 1535. with 4gb ram, 2Gcore2due etc. My webcam setting isnt right. (i am in my room's bright environment) see this is the picture takken with default settingz with this default settingz. even if i increase gamma and brightness,, then quality is shaky. anybody tell me the exact settingz.
I am just not satisified with this laptop. I paid €1200 euro at the time, and in return got a somewhat unstable system. Windows had this bad habit of crashing often, and not shutting down correctly, until I upgraded to Vista 64-Bit.
I am although, happy with the 4GB of RAM, and graphics, you get what you pay for with them, although the Graphics card is the main reason I am going to purchase a new laptop as my gaming is going to have to go mobile in boarding school soon.
Anyway, the silver casing I bought my laptop with is just unsatifactory. I had it sent back twice for cracked lid hinges, both sides. Now this is the third lid casing I have had, seems to be okay, hinges haven't buckled yet, but the plastic is still flimsy, cheap and very very badly painted. I have had this new lid on for 2 weeks now and the paint is already starting to scratch and peel off above the LCD, and is damaged and quite scratched on the palm rest, although that is to be expected.
I have had a problem with the sound twice. It randomly decides not to play through the speakers, unless I apple pressure to the bottom left of the laptop with my left palm. Got the motherboard replaced twice yet this has only been improved but not prevented.
Sounds like a loose connection or bad fitting issue to me.
Lastly, the media keys above the keyboard, ALWAYS freeze. The keys have been replaced twice to, but still it has not been fixed. Every time I turn on the laptop, whether booting into Vista 64-Bit or XP Professional, it happens. Eventually it resolves itself, but is a major annoyance, especially when it decides it doesn't want to eject my disc, and freezes up as a result when I try to eject it by right clicking "My Computer".
Oh, and to top it all off, the keys on the keyboard tend to flick upwards and appear to almost break off, I had a problem with my "K" key coming half loose once.. Not re-assuring.
Sorry to be a pessimist. Just expressing my opinions, not forcing them upon you. Similar stories or opinions are welcome to be posted in this forum. Also, I do not know, but have these problems been resolved in the 1555?
I am having MAJOR issues with my Studio 1535 and I could use some input!
About two months ago, the fan kicked on at HIGH speed as soon as I pressed the power button to boot up. It continued to run on HIGH indefinitely, unless I lifted one of the rear corners a bit off the desk. Then the fan would stop instantly until I lowered the edge back down to the desk surface.
I've spoken with a few other 1535 owners who've had the same issue. Motherboard flex seems to be the culprit and it (the system/mother board) needs to be replaced.
I sent it in for warranty repair the first time with a detailed explanation of the problem. I also detailed a problem I was having with the keyboard that needed to be fixed. They replaced the keyboard and didn't address the fan issue. Immediately out of the box, I powered it up and the fan instantly kicked on HIGH, too.
I sent it back a second time with a detailed explanation again (after a long chat with tech support). They replaced the fan itself. I got it back yesterday and as soon as I hit power, the fan kicked in at HIGH speed. Making matters WORSE, the system gave me an error during the boot sequence that it didn't recognize and couldn't charge the battery! It allowed me to ESC out of the error and booted to my desktop. That's when I realized the Touchpad wouldn't work at all! I had to connect a wireless mouse via USB to do ANYTHING!
To add insult to injury, there's an inch-long scratch on the Midnight Blue lid that wasn't there the last time I sent it back!
So now, I've got the FAN/motherboard issue, some sort of Battery problem AND the Touchpad doesn't work! The scratch is the least of my worries...
I carried out my laptop when i was traveling.Now when i press power button on ohe media control is glowing nothing happening (even monitor is not displaying).my warranty has expired last month.
When i call to technical support they were saying Pay 16500rs for renew your warranty then we will come and see the issue.
Right now I'm posting this from a friend's netbook, for the record.
So, this is something of an emergency. My Studio 1535, as the title says, is not starting. When I first plug in the power cord, the small white light turns on for just a second and then turns off again.
Normally it stays on while plugged in.
When I press the power button, the white ring of light around the button turns on like normal, and the media buttons flash in sequence, just like a normal boot.
Unfortunately, this is where it stops going as usual.