I know the Studio 1747 has it's fair share of Bios problems that haven't been fixed yet (naughty Dell) but the one I'm having issues with right now is that my system wont boot at all from USB.
View 5 RepliesDoes anyone have any idea why? Is this something affecting Dell globally or is it just UK/Europe in a mess?
I guess I could survive with just wireless G, but it seems ridiculous to be limited to that these days;
I guess I could also just order it and pick up an intel/dell Wireless N card for ~£25 and install it myself,
but again the question arises, why is it necessary? I assume some of you do have an 802.11n card of some description in your 1645/1747's have you seen any problems with it? .....
I'm university student and ntb is meant to be carried almost daily (16" is ok for me), it's mainly for multimedia oriented jobs, some programming in C and Mathematica, some photoshop or even premiere (occasionaly), A LOT of movie watching. I also want it to be futureproof and well-built.
Dell XPS 1645 meets most of my criteria, but there are few things I'm unsure about...
1) after reading a couple of reviews and many posts on this forum I'm really doubtful if RGB-LED is worth the extra money. I'm not doing colour sensitive job (however I do sometimes edit RAW images in PS), but i want things on the display to look natural, especially in FullHD movies... (and I'm occasional gamer too)
Those who had honor to work with RGB-LED: would you pay for it in my position???
And just to make sure I haven't overlooked something: biggest DISadvantages of RGB-LED are supposed to be: inaccurate colors, bigger power consumption and some heat produced;
while advantages should be: 0,4" gain in size, wider gamut and (maybe) better brightness...
Do you know any more to be added?
2) I'm also considering usual Studio 17 with Core i7 720QM (almost the same config), because it should be cooler, it has numpad and place for additional hdd (I'd buy 80GB intel ssd 34nm for system while keeping stock 500GB for data, I think it's beatiful idea), but what I DISlike about studio 17 is: dimensions, weight, speakers and design (and maybe a bit worse overal built quality).
So which one do you think is better for me?
3) how does combined e-sata/usb work? Since I have a external e-sata drive I have to plug 2 cables at the moment: USB for power and e-sata... With this 2-in-1 port do I need only 1 special cable? Or is it meant to be either/or thing??? From the placement of combined e-sata/usb on the opposite side of ntb than other USBs I'd say that 1 cable should be enough,
This is for the Dell USA site as of 5/6/2010....any other countries and/or times YMMV
There are some notable differences between the 1747 and 1749 being offered via the Dell Studio 17 selector
1749:
ATI 5650
i3-350M, i5-430M, i5-520M (No i5-540M or i7-620M. No Quad Core Options)
1066 memory (Makes sense since dual core i3,i5,i7's only support up to 1066 memory)
9-Cell battery as default option
1yr Warranty default
1080P "RGBLED" panel Description/Product Code = DH1080F / 320-8968
1747:
ATI 4650
i7-720QM, i7-820QM (No dual core options at all)
1333 memory support
9-Cell battery as default option
2-yr warranty default (No 1 yr option)
1080P "B+RG" panel Description/Product Code = CH1080F / 313-8043
Blue Ray RW drives are now an option for both @ $150.00
Intel 6200/6250 options are available for both
I'm definitely curious about the panel changes along with system board revisions to see if the 1749 supports Quad Core CPUs.
I purchased a Studio 1747 from Dell online. On the left side, I have a tv tuner port.
I have tried hooking up an antenna but Windows Media Center does not detect a tv tuner on this laptop.
Is there something I'm doing wrong? or did dell not install the tuner? or is it a dummy port?
Sorry to bother folks with this nuisance, however, I updated my ATI Mobility Radeon 4650 drivers via Dell's website to 8.65 and ever since, the Catalyst Control Center refuses to run. I politely click on it, the machine thinks for a while and then, rather rudely, simply ignores my request.
View 5 Replies View RelatedAfter putting up with countless BSOD's and failed harddrives on the Inspiron 1720, they send me a refurbished Studio 1747. Bigger hard drive space, HD screen, and twice the ram are very enticing to keep this machine. But the Inspiron's GPU AND CPU processors are faster (compare Intel Core i7 720QM processor and ATI Mobility Radeon 4650 graphics to the dual 2.0GHz centrino duo nvidia geforce 8600m GT). And I also found it silly that they would include an HD screen but not a blue-ray disc reader. So since DELL told me over the warranty phone line that they would "match the specs of your [my] old computer," should I just keep this or run some benchmarks on some games and figure this out? I don't want to spend more time on this if I have to if it is common knowledge that I got a good ad deal.
edit: forgot to add that the studio runs windows 7 64bit and inspiron is running w7 32 bit
2 years ago i ordered a Vostro 1700 that took ages to arrive because of i think back then screen supply problems.
Now we ordered a few new Studio 1747 with the Core i7 820 procs the order date was 1 December.. But now i got a mail that the delivery date is pushed back to 17 of February!! Wooot???
It seems that dell is many times just saying that you can order new systems but most of the time they can deliver one bit?
Its orderd from dell.nl, how are other orders doing in Europa? Are the 1747 with the Core i7 being delivered in the states?
I've been getting this weird problem with the 'M' key on my keyboard.
It randomly doesn't acknowledge a keystroke. And it's completely intermittent. I'll just notice that an M is missing from my messages or from a URL.
Latest BIOS and Chipset upgrades are installed, that's what Dell Support told me to do. And then nothing.
I really don't want to send my laptop in, it's always such a hassle.
Any ideas? I know if I wait long enough I can just replace the keyboard off of Ebay if it's the hardware that's the problem.
i got the Intel X25-M G2 80GB SSD for Christmas, and i'm looking for some help installing it. Mainly, does anyone know where i can get the hard drive caddy that is apparently needed to install a second drive (my 1747 has just one HDD)?
View 8 Replies View RelatedThis is for me not really acceptable, we are almost in the year 2010 and i find it weird that there are still b/g cards sold....
I definitely dont want only b/g but i do want n (most of us around me now have 50+ Internet connections and i hope the have next year 60/6 or even higher)
Has anyone had their Studio 1747 with a 1080p screen crash while playing 1080p video full screen?
I tried playing a movie trailer full screen in 1080p on youtube and mine crashed.
Configured with a dedicated 1G ATI Radeon HD4650 graphics card, will it run decently with something maybe like Crysis at an HD resolution of 1920x1080?
View 3 Replies View RelatedIt is an automatic drive. My computer says the bluray drive is working right. Tried right clicking and ejecting and hitting the eject button. It is an automatic slot drive. Tried windows software to find problem and it couldn't work either. It worked just 10 mins before it happened. It is a windows 8 pro OS. HL-DT-ST DVDRWBD CA10N is the drive windows calls it.
View 2 Replies View Relatedi have a dell studio 1747 notebook. now i am facing a problem . while playing games (Hot pursuit, Â call of duty etc) after 5 to 10 minutes it Shuts Down but i can do normal works like browsing , office , or some simple softwares etc. then heat increases normally and Shuts Down after 3-4 hours. Â
View 1 Replies View RelatedMy computer is the dell 1747 Studio Laptop running Windows 7 Professional. It has the built-in Synaptics Touch Pad. When you drag your finger on the far right side of the pa, it auto scrolls through the document on the screen.
I use my Laptop almost exclusively with a remote desktop connection. I process large documents (some as many as 200 pages). If I accidentally drag my hand or finger up or down on the left side of the touch pad, it begins to scroll. Since it is a remote desktop connection, it will not stop scrolling until it reaches the end of the document either up or down. I have to sit and wait for it to finish scrolling before I can use the computer again.
I would like to know how to turn OFF auto scrolling on the touch pad. There is a "wheel" setting in the device setup menu but you can only turn it down to "1" not "zero".
I just bought a Studio 1749 with a Dutch US international keyboard. The US backlit keyboard is the only backlit one and not an option here.
The only difference is the missing € symbol at key number 5, for which I don't care so much.
Now I'm trying to find the US backlit keyboard at eBay or Amazon without success. Is there a way to find one aftermarket and get it shipped to Europe?
my studio 1747 (not in warranty) (i7 win7),has stopped booting anymore it was working fine till last week ( occasionally my screen does flick in last coupon of month), So when I do turn my system on all upper volumn light flashes from left to right and then right to left and then system turn off itself, during that period screen show no display.
connecting external monitor (TV via hdmi) does work and system boots fine show display on external monitor but no display on system LCD. Something display flicks on external montor also, it happens when my laptop LCD tries to display something (i.e. sometime laptop LCD flicks and sometime it display for few seconds and then go back to Black screen). Also when connect external monitor my mouse pad stops work and sometime works when I connect usb mouse, but when LCD screen start display something, mouse pad also starts work.I tried all stuff, whatever I could find on internet as below Â
1) Taking battery off and press power button for 1 min. Â
2) Hold 'D' key and then press power button LCD sometime show some color and then goes back to black. Â
3) Removed battery and CMOS battery to total drain of charges. Â
4) Removed keyboard panel and checked LCD display cable and make sure its not loose.
To me it seems like motherboard, graphic card are fine as system is working on external monitor, LCD screen also looks fine as sometime is display and not greying out (its either Black-out or display). As I have also checked cable is properly attached with motherboard, so it can't be loose connection. Don't understand why LCD works sometime.
Will N5110 support UEFI boot mode and when?
View 1 Replies View RelatedDo the Studio XPS machines get the customer support that the standard XPS machines do? That is, the American customer/tech support rather than the outsourced one?
View 10 Replies View RelatedI rely heavily on SDHC cards and use the built in card reader heavily in my Studio 1537.
I just bought a new Studio XPS 16 and it won't read my SDHC cards. I chatted with Dell last night and they took control of my system remotely.. They couldn't fix it, and finally said "The Studio XPS 16 does not support SDHC, you'll have to use regular SD"
I just find this hard to believe on a new, so called "State of the art system"
I also have a Studio 15 (1537) and SDHC works perfectly.
After fighting with several "Techs" and their "Supervisors" I returned the system and bought another..... AND, what do you know... I was right....It does support SDHC!!
I was thinking of replacing my cpu with an Core i7 if possible? has anyone tried it out yet?
View 3 Replies View RelatedAll those who have a 2010 MBP and a 3rd party SSD, please try setting up bootcamp and let us know if it works.
Has anyone successfully setup bootcamp on any of the new macbook pros? When I use boot camp assistant, I am able to set up the partitions. However, once I enter the windows 7 install, it doesn't detect any partitions at all (not even my mac partition).
I've tried both 32 and 64 bit versions of Windows 7 (home, prof, and ultimate). The SSD is an Intel X25-V 40GB
UPDATE 1: Swapped the stock HDD back in and bootcamp install seems to work fine. Partitions were immediately recognized by my windows 7 ultimate 64-bit. Could Apple have blocked support for 3rd party SSDs somehow with these 2010 MBPs?
My HP Support Assistant is not working, I am using DV-6 3225 dx, Window 7,
View 4 Replies View RelatedIt looks like Dell will be upgrading to the mobility HD 5730 (which is lame, by the way, since there will amost certainly now be no gddr5 memory but thats for another thread).
But my question is whether they have enabled the switchable graphics or are making us pay for an IGP we will never be able to use.
I'll bet the lazy engineers at Dell wont bother with it and argue that you dont need intergrated graphics if you have discrete graphics and so on ......
Does anyone know if the Studio XPS 13 with the 9500M support NVIDIA's PhysX?
NVIDIA's new beta drivers list the 9400M G and 9200M GS as supported and the 256MB of RAM meets the support requirement.
I've only just installed the newly released Dell Vista x64 drivers so wanted to see if anyone else had tried it or were going to try it?
I am using HP pavillion g6 2301ax with windows 8.1 installed on it. I tried to run the hp support assistant but it didn't run.
Â
The program opens but it remains blank. It does not show anything on it, only hp support assistant is written on the top.
Â
After I close the program, automatically a message appears "Hp support assistant is not working. Windows is finding a solution to it." Then the message disappears.
Well can it? I want to put one in mine. I guess it's anybody's guess, but I would assume the motherboard will apply the right stepping. The voltage and chipset and socket requirement is the same.
View 4 Replies View RelatedIf I have a 1080p/5.1 source on my laptop (BD, .mkv, etc.), will I be able to output that signal via the HDMI port?
I've read about some laptops only supporting HDMI video/not supporting HD resolution output/HDCP issues and just want to confirm that the Studio is capable of this.
just got a Z40-70 59436180 w/ nvidia geforce and installed it with windows 7 (32 bit),the nvidia vga driver setup told me that i have to install intel vga driver first before installing the nvidia one..
Â
the problem is i can't install the intel vga driver which i got from the lenovo download support page (the filename is "ivg200w732.exe"),when i run it, it says something like my computer doesn't have the minimum requirements for the driver to install..well it looks like it is the wrong driver, because when i explore the installation directory, i found a "x64"-named directory... and no "x86" or "32bit" or anything similar...