I just last week received my 1530 and loaded COD4 on it 2 days ago. It plays well, but when the action gets intense, I get a pretty serious frame lag.
I have played around with the settings in an attempt to resolve it, but don't really know what I am doing or where to start. Can someone recommend the first few most effective settings changes?
Dell XPS M1530 | T8300 | 4GB RAM | 15.4" LED LCD (1440x900) | 256MB 8600M GT | 320GB 7200RPM | Vista Home Premium |
Got my studio xps 16 yesterday, love it but have an issue. In call of duty 4 i can only seem to get a limited number of resolutions even if i change the aspect ratio from 4:3, 16:9 etc. For example i have no resolution in between 1280*1024 and 1920*1080. Need a 1600*1200 option. Changing the aspect ratio in l4d gave me more options but this fix doesnt work in cod 4.
i got cod5: waw recently. played only multiplayer so far.
problem: it already crashed three times to a bluescreen.
i tried to change the video driver from 180.42 to stock dell 175.75. same problem.
i used no overclock. atitool off. no background processes.
i guess it is the game, cause i played cod4 for a LONG time and never had this issue. also played through bioshock, farcry2, etc. never a bluescreen there.
So the technician successfully replaced my video card and everything was great and fine with the world. I tried it out on Call of Duty 4 and checked the temps which peaked at a MUCH lower level so I thought I was good to go and I was happy. The only problem I had was a small amount of choppyness in the game, but I just figured I had the settings too high and I had not overclocked it at all. No problem.... So now today I wanted to play good old Oblivion and I figured this would need some overclocking because well....its Oblivion. So I start up ATI Tool and overclock it to around 620 mhz core and 720 mhx memory...Not too much overclock considering some of you have got yours to like 650 or higher and 800 in the memory department... Well I was just about to start playing when after the game loads there is no character on the screen just grey lines... So I figure maybe I overclocked it to much? I turned it down about 10 to 20 mhz and I still had some artifacts? I pretty much turned overclocking so far down I would now consider it slightly pushing the card. So I try to play oblivion and it is really choppy. Before I got this new card I had some pretty bad heat problems and crashing because of it, but I could overclock it to a MUCH higher level than that of this non heat problematic card?
So my question to all of you highly intelligent and knowledgeable people of this forum is do I have a bum card or is something else the matter? Sorry for such a long post I just felt my story needed to be fully explained so I could receive the best support...
With the base Macbook Pro, how will the following titles work:
1.) TF2 2.) L4D 3.) Call of Duty: Modern/WaW
I'm guessing the default of 2gig ram is going to hurt. I would upgrade in the near future to 4. I'm not looking to put AA/AF on, but I would like a smooth framerate at the native resolution.
I received a call from a guy who was clearly calling from India today about ComgpleteCare. It seemed that he already had all my info and apparently ordered CompleteCare before I even confirmed it.
My son had picked up the phone, was given a confirmation number, and my son then gave the phone to me. When I was given the phone, the guy said that he wanted to verify a few things. He asked me for my credit card number, which I stupidly gave to him. He then said that CompleteCare was ordered .....
Can't seem to find a latitude with the specs I want. Unfortunately, when I find it, the system is gone thats what I get for being slow. My question is if I call Dell, how is the pricing over the phone compare to online and would I be able to use a coupon over the phone?
I've got a 1555 spec'd out with a 25% discount coupon code applied($1154 to $865). I was wondering if anyone thought it was worthwhile to call Dell up and try to get them to offer me an even better deal. There's nothing else I really want....I mean, I guess they could up me from a P8600 to a P8700, but that's about it. So I wonder if I could get them down to an even $800. Any thoughts or recommendations? I'm on a very limited budget, so every bit helps...
I have a HP ENVY m6 Notebook PC, whem I used skype video call, the image of video is upside down, and I can not find any way to change the webcam hp truevision driver on Windows 8. How to make the video image back to normal?
When will the price of the m1530 come down? I want it, but it costs a lot.. After christmas maybe? Or am I better off getting something else?. I do live in canada so none of those amazing $400 off Inspiron/vostro coupons work...
I had made the mistake of lending my XPS m1530 to a friend who is in the hospital due to cancer and she gave it back all messed up.
Most everything don't work. I can't get online, a lot of programs don't work, such as trying to right or left click in the taskbar and other places... nothing happens.
I tried system restore to before she got the computer and nothing changes. I've ran AVG and spy bot and it found some stuff, supposedly fix them, but the problems remain. I defragged too.
So what to try next? Reformat? I don't want to if I don't have to.
So I'm having heat issues with my m1530...but that seems to be the norm.
So I've got a Dell tech coming out to replace the mobo & fan/ heatsink.
Do you guys know if the Dell tech will remove the old thermal paste, and use some AS5 (provided by me of course) instead of the crappy Dell thermal paste?
If not, when would be the best time for me to do it? Right away, or should I let the thermal paste set before I remove, and replace it?
I'm getting ready to order a new m1530, but can't decide on Ram options. I know with 32-bit Vista, it only recognizes ~3.2GB of RAM, so would the benefit of 3.2GB Dual Channel be worth the upgrade from 3GB non-DC?
Has anyone noticed any problems with Aero when using non-DC?
Building an M1530 from parts and got the LED screen, Chimei part number N154C6-L02 with cable N849D.
Here is the problem; looking at the cable there is a connection for what could be an inverter/converter but I cannot find a part number from Dell or anywhere else.
Does anyone know what part this is and where I can get one? Is it the same as other Dell models with the WSXGA+ LED?
I have an XPS M1530 that's just shy of 6 months old.
Over the past 3-odd months I have begun to notice some things that I REALLY dislike about this laptop.
1. It gets UNBEARABLY hot. I'm afraid I might not be able to have kids if I use it as intended (ie: on my lap)
2. It can't play TF2, CSS or HL2 at all low settings. That's ridiculous. I suspect that may have something to do with the poor thermals.
3. Its battery life is ridiculously short. Not much of a problem in everyday life, but something that really gets to me on those >6 hour intercontinental flights.
4. The Fingerprint Application (psqltray.exe) seems to dislike Vista x64. I've caught it using up to 1,000,000K of memory.
5. The internals are of TERRIBLE quality. The heatsink offers no reassurance about thermal performance whatsoever.
6. Dell tech support is beyond incompetent. I do believe my 11-year old sister knows more about hardware problems than the 2 people I spoke to.
Can I call Dell over for a physical inspection of the laptop? I divide my time between India and Los Angeles, but most of my time is spent in LA and the laptop was bought here.
i had a XPS M1530 since Jan,2008(When first release). couple of weeks ago when there was an issue with my media buttons dell decided to change the whole system as they were not been able to fix it.
actually the light(Blue surroundings lights when once touched the media buttons) was not as brighter as they were suppose to b. when i first bought the system these lights were really brighter. but a month ago when the buttons were not working properly dell replace the whole Media Hinges Cover. i found the lights really deemed. then they again changes the hinge cover. but still the same. third times they changed the mother board, but nothing fixes the problem, i mean every times it's deemed media buttons. so they changed my whole system.
the new XPS M1530(replacement) i have received a couple of weeks. but u know guys, i was surprised to see that these media buttons r also deemed. and it was assembled in Poland where the old one was in Ireland. also i have found another changes that is, the screen light is much more brighter. something like Blueish. i don't know if it is good or bad. one of my house mate has got his old xps m1530. so i did compare just putting his one right next to my system. they also changed hdd. my previous one was Fujitsu and this one they have put Hitachi. this hdd make little noise than previous one.
i could complain to dell and keep replacing the parts but i didn't, u know guys why, bcz this new system came along with Processor 2.5Ghz where my previous one was 2.2Ghz.
I put it on the table and started to work... At first i heard clicks from HDD. Then i downloaded HDparm and done what there were said:
"Just install HDPARM and run the "unclick.exe".
You can put a shortcut into the windows "autostart" folder to run it directly on boot"
After that clicks form hdd gone...
But today i took it on sofa and when i picked UP it i heard like scrpas clicks FROM HDD. and in vista all started to slow.... then i didn't moving it and when i moved it (picked up) again - again this....
I downloaded HD Tune and done some tests.
CANT post here picture but the graph was like if its standing its all going straight but when i picked first it falls down and vista slows down .. and then i put it back on table but when i pick up it again and starting walking slowly its started to beep clicks and etc. and again the line was fall down 3 times (to the transfer rate minimum) ...
2) This was when i was moving slowly it like walking and i heard clicks ... sounds from it and A BEEP like sound 2 times..
1) thats when i picked up it only.
HD Tune: ST9200423ASG Benchmark
Transfer Rate Minimum : 0.3 MB/sec Transfer Rate Maximum : 78.7 MB/sec Transfer Rate Average : 59.9 MB/sec Access Time : 27.7 ms Burst Rate : 73.0 MB/sec CPU Usage : 3.7%
I now have 8 gb of ram on my xps m1530 using the A11 bios update.
I want to thank Rhodan for the idea and the original poster of the A13 bios for m1330 thread. I downloaded the a11 update and installed it. I then installed my other 4 gb sodimm and bios recognized it and windows recognizes it. this is awesome.
Kudos to Dell for listening to its ideastorm ideas and implementing the ones that really matter to us users.
So I've had my laptop a year and a half and it has always gotten very hot to the touch. Right now it is at 60 degrees C. Earlier it was up to 68 I believe. Is this normal? Also I don't ever hear a fan on and I'm not sure if it even works. Is there anyway to test this? Or am I overreacting to the temperature?
just wondering do you have the same problems like me ? I have to turn all details on low and it looks like shi*. Really pis*ses me off that I never get more than 18 FPS.
I have the M1530 2,4GHz 8600M GT 4GB RAM, Windows XP SP3
I know that the M1530 is not a killer gaming machine but it cant be that bad or what do you think ?
Alright I bought a refurbished laptop for $900 and the performance has been terrific. Now i have several minor problems i like to point out to see if this is normal or not and if its not i like to have it fix.
The first picture shows the plastic (whats the name for that?) isnt flush against the frame .....
