If kindly help a brother out. I just bought a Studio 1537 for my lady and i was unable to install windows 7 64 bit RC. It's saying
"the version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (bit) or x64 (bit) version of the program, and then contact the software publisher."
I installed retail Windows 7 Ultimate 32-bit on Studio 1537 (the one in the signature) So far whatever I have tested, except the touch buttons, everything works.
I wonder if anyone knows how to get those touch buttons working.
I recently had to replace the hard drive on my Studio 1558 laptop and reinstalled the operating system using the disk that came with it. All went well until I had to reinstall the device drivers to get my device to access the internet via wifi. So far, I can't seem to get the driver for the device that allows my laptop to see any wireless connections and have to plug in a network cable to go on the internet. how I can get the right device drivers other than using the device driver disk?
View 2 Replies View RelatedDid a clean install of Windows 7 64 bit on a Studio 1537 and have a few questions. First off is how do I get the Dell backup software installed? My previous OS was Vista 32 bit so as I'm running a 64 bit os the disks that originally came with my computer probably won't be of any use.
I also require the Dell webcam software program. S Dell has a site where you can download this software but like a number of pages on Dell's site, it doesn't seem to work, does not recognize my service tag..
I also need software for the fingerprint reader. I found the driver for it, Authentec Inc but for some reason I can't find my previous software, Digital Persona Fingerprint Software.
Let me correct that, I did find it on their website but for some reason the program never fully installs itself. It says that it's now preparing to enrolling process but never does
So, almost 3 months ago I purchased a Dell Bluetooth 370 card from Dell as well as a Dell Bluetooth travel mouse. At the time I was running Windows 7 RC, and all was fine.
Then, I found via Craigslist a Dell bluetooth keyboard for CHEAP locally and purchased it. About the same time, I installed Windows 7 RTM. That's about when the annoyances started to happen.
I recently installed windows 7 pro on my dell 1537 and i'm facing problems with display
View 15 Replies View RelatedI did a clean install of Windows 7 64 bit Ultimate a month ago and everything is running well. However, I've noticed in Device Manager that there is an unidentified base device which is lacking a driver. Here is the info:
Device Type: other devices
Manufacturer: unknown
Location: PCI bus 9, device 1, function 3
Device Status:
The drivers for this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Updating the driver through both the internet and searching through my computer has not found a driver. Any ideas on what the issue might be?
I'm looking for a decent Alps Touchpad Windows 7 X86 Driver.
I installed the 7.102.101.224 available in the 1737 download page but it doesn't work fine...
I tried the latest Synaptics but it doesn't work at all...
my Windows is not able to boot and I have to repair it with a Windows Vista DVD taken from another Dell (Desktop) PC. The installation is not able to detect a drive and so I am not able to select a Windows installation to repair. I need the drivers for the Harddisk (or controller) to add it to the repair process. The problem is that on the Driver support page only firmware for the hard drive is available but no .inf file that I need for the repait.
where I can find the .inf file or if it is possible to extract the file from the destroyed windows installation (via live-linux).
i just bought an acer aspire 5102wlmi without a HD for a friend. so i went and bought a HD and proceeded to install windows XP home service pack 2.
the problem is it constantly stays in a loop, i load and boot from the disc, it copies all the files, reboots, loads the files, says starting windows, and then just starts all over by going back to the setup screen. i've formatted the drive and made multiple attempts. had anyone else had this problem? if so what is the solution?
I just installed new HHD; trying to reinstall Windows Vista Home Premium 64BIT SP1 from Reinstallation DVD of the Dell Studio 1537; I get twoerrors:
1-This computer’s hardware may not support booting to this disk. Ensure that the disk’s controlleris enabled in the computer’s BIOS menu. How can I tell the disk is enabled?
2 - Windows is unable to find a system volume that meets its criteria for installation. What? My HDDisk size is 298.1GB free space?
I have an ENVY 17 (3277nr) with windows 8.1 in it but I'm unable to update it since several months ago so I decided to reinstall the OS so I went to the windows site that lets you download an ISO image of windows 8.1 to burn it into a disc (right now I dont have a 4gb usb at hand but is also possible).
I already burned the disc by right clicking the ISO and selecting 'burn disc image' and changed the boot options but every time I turn on my computer all I see is a single underscore and then the regular windows 8 boot screen.
I already visited wbesites in this regard and I've read things like the windows 8 UEFI thing (not on my laptop since I've upgraded from w7) and the security settings on the BIOS but none of them seem to fix the problem.
Additional details:
Oddly, when trying to open the burned dvd it only says 4.37gb out of 4.37gb, do you think my dvd drive might be damaged?
HP 1000-1327TU Notebook running on windows 8 (64 bit) chinees. actually my brother purchased the HP 1000 laptop in china and gifted me , it is running in chiniess language operating system . iam unable to change the language to English so i decided to uninstall win 8 and install win 7 .but unfortunately it is not booting from cd , how to install win 7 in this laptop
View 3 Replies View RelatedI have this HP envy 17 j000eb notebook with Windows 8 that I really would like to get rid of.
I managed to install Windows 7 on it, but it doesn't recognise some hardware.
Luckily audio and video works as well as the touchpad and DVD-rom, but I don't have any of network adapters installed, nor USB, and I still cannot find any drivers for them.
It shows a dozen of pieces of hardware needed to be installed.
I am new commer here and this is my first post. I have recently purchased this nice laptop: Acer TravelMate P255, Intel Core i3-4010U (1.70GHz, 3MB), 15.6" FullHD (1920x1080) LED-backlit Anti-Glare, HD Cam, 4096MB 1600MHz DDR3L, 1TB HDD, DVD+/-RW, AMD Radeon R7 265 2GB, 802.11n, BT 4.0, Linux : NX.V9GEX.004
I would like to change it's preinstalled Linux with a Windows 7 version. But I don't know which exact versions of Windows 7 this particular model is compatible with, because I failed to install the AMD graphics adapter driver from the support DVD disk on a Windows 7 64bit. Do I miss something ? Need I, for example, make any changes in the BIOS ?
I have found same drivers to download, but none of them was successfull for my laptop.
While trying to install Intel Rapid Storage Technology(IRST) Driver on my Lenovo G560 Windows 7 64bit OS it is not able to install and gives me some error regarding hardware not match or etc. error then i came to know that to install AHCI driver i have to change in BIOS Sata controller mode from 'Compatible' to 'AHCI' i tried so and then restart the system but it gives BLUE SCREEN error while windows startup logo and restart again, any solution to use Rapid Storage Technology on G560 and actually this driver was installed when i purchased the new laptop but after certain format and fresh windows installation its no more able to install, how to install it back..........
View 6 Replies View RelatedI just finished doing a clean install of Vista SP1 on my new Studio 1537. Everything has gone well, however when I checked Device Manager I have one device with an exclamation mark next to it. When I clicked on the unknown device properties it tells me that it is "Intel(R) ICH9M LPC Interface Controller - 2919" I've looked all over Dell's Driver and Download site and I can't find the driver for this device nor do I know what category I should look under. When I contacted Dell's support they wanted me to unistall the device and overwrite my current BIOS version, A07, with an older version, A05. I decided that wasn't the best way so I thought I'd ask here hoping someone could help. After my install I loaded the drivers in the following order per Dell's directions: Notebook System Software, Chipset, Audio, Video, NIC Card, Dell Quickset, Wireless NIC, Touchpad. I didn't download and install the SATA drivers from Dell's website because my drive model isn't one of the ones listed for use with the driver. My drive is listed as a ST9320320AS. I'd appreciate any help someone can offer.
I've purchased a HP Pavilion 15-n011tu Notebook. I'm unable to install display driver for WIndows 8 (64bit). I've tried all 3 drivers given on HP site.
1.NVIDIA Graphics Driver (2013-10-02 , Version9.18.13.1170, 318.33M)
2.AMD High-Definition (HD) Graphics Driver (2013-08-16 , Version12.105.9.0, 204.81M)
3.Intel High-Definition (HD) Graphics Driver (2013-08-16 , Version9.18.10.3224, 136.34M)
I just got a new studio 14 laptop from dell with Vista OS
I need ti install XP SP1/SP2 in that
tell me the procedure what settings i need to change in the bios to install windows os
any link where I can get the drivers for the Studio 14 laptop
I got my Dell Windows disk yesterday and I would like to do a clean install. I would like to do 2 partitions....
one for the OS at 150 GB and the remaining space in another partition for things like music, pictures, movies....etc.
I was able to delete all the partitions that originally came with the 1555 so that there is one big Disk O Unallocated Space.
I then clicked new to make a partition for the OS. I set it to be 150 GB when I did this it also created another partition at 100 MB. So now I have:
Disk 0 Partition 1: System Reserved Total Size 100 MB Free Space 86 MB Type System
Disk 0 Partition 2 Total Size 146.4 GB Free Space 146.4 GB Type Primary
Disk 0 Unallocated Space Total Size 319.3 GB Free Space 319.3 Gb .....
just had time to install windows 7 w/ my upgrade CD Dell sent for my studio 1555. The installation went great but for some reason 122 GB of my HDD is being used up. I though i did a clean install since i clicked advanced settings rather than upgrade.
View 10 Replies View RelatedI know that on the dell site it states that the studio only supports 4gb ram. But I know the chipset supports 8gb ram. I was wondering if any one has tried more than the 4gb.When I look at the report from everest, it states that the system supports 8gb.
View 10 Replies View Relatedis it normal for a the fan on a studio 1537 to ramp up every 5 minutes or so? It doesn't go to full speed but its cleary audible and a little annoying. When it happens when I'm just browsing the web etc so nothing is being taxed.
Its about a month old and I have had the fan replaced but didn't really make a difference. Is the controller part of the fan assembly? Is there something else I need to get replaced? or is this the case of the laptop jsut trying to keep optimal temperature?
I just bought a new Dell Studio 1535 and encountered the following problem:
I inserted my windows xp installation cd (as the laptop came with no OS). Windows setup began running, installing a multitude of drivers and files as it should until a message, something in the likes of "starting windows" (up to this point the screen is still the dos-style setup program). After a few seconds, a MS windows blue screen appears, stating that it encountered a fatal error.
I have a couple issues with the studio. I have the jumpy trackpad problem. Seems there is no solution.
And graphical coruption with the video card. It happens at random times to all windows and when playing games. Built in games, or other games.
i just cracked my screen and might replace it if its cheap enough. the back of the screen model is LP154WX7
and i am just wondering if i can just get any screen that was in a 1537 and fit it in or does it need to be the same model again.
I have a Studio 1537 with a 3450 graphics card, 500GB HDD, 4GB Ram and a T9400 CPU. After around 20 mintues of the laptop being on the area surounding the touchpad gets quite warm
View 9 Replies View Related