I bought my HP HDX X18T-1200 CTO approx. 6 months ago and it was installed Vista on it. I upgraded it to W7 (clean install, of course) and I think W7 is a great OS, and way better than Vista. But, as i remember, ever since i started using W7, my problems with this laptop started too. Generally, my laptop has 4 main problems:
1. My eject button and bass/treble slider aren't working! I've read a lot of users are complaining about this issue but some of them say they can make it work. I'm wondering how they do it (and how can i do it, of course ).
2. When I install MediaSmart, QuickPlay, Tone Control (or whatever they are called) program that has volume/bass/treble indicator, it doesn't work properly and keeps popping up (especially it happens when I close the laptop's cover or wake up the computer from the hibernate mode). So I deleted all the software related with this. When it pops up, my bass/treble sliders (but not the volume slider) are malfunctioning, too, bass and treble levels just keeps increasing and decreasing, increasing and decreasing, increasing and decreasing...
3. My remote control buttons doesn't work at all. I think it's a software-related issue (because it was working a few months ago, my remote control and its batteries are okay too). As I said, Currently I have nothing which is related with QuickPlay, MediaSmart etc. installed on my computer, i think that's the problem. Which program(s) should I install?
4. The issue that annoys me the most is, sometimes (it happens especially when I close the laptop's cover or wake up the computer from the hibernate mode, too) my touchpad enhancements doesn't work, it can't even recognise my taps! At first, I thought it's a touchpad-related issue. But one day, when I can't use the enhancements, I turned on a key grabber software (the software which shows the key codes) and I see the codes of bass and treble slider's buttons! The computer thinks I press the bass/treble slider's buttons constantly bu I don't even touch them!
Any opinions that can be offered on this laptop as a whole. Good/Bad points etc from owners of the machine pref . Would be appreciated since im looking into alot of different laptops that would be mainly used for gaming.
I ordered my HDX18 on 5/19 and got it yesterday, 5/28, through 2-day shipping. Here are my system specs:
HP HDX18t Premium Series Notebook PC - Genuine Windows Vista Home Premium with Service Pack 1 (64-bit) - Intel(R) Core(TM)2 Duo Processor T9550 (2.66 GHz) - 4GB DDR3 System Memory (2 Dimm) - For 1GB Nvidia GeForce GT 130M - 500GB 7200RPM SATA Dual Hard Drive (250GB x 2) with HP ProtectSmart Hard Drive Protection - 1GB Nvidia GeForce GT 130M - For DDR3 Memory - 18.4" diagonal High Definition HP Ultra BrightView Infinity Display (1920x1080p) - Lightscribe Blu-Ray ROM with SuperMulti DVD+/-R/RW Double Layer - Webcam + Fingerprint Reader with HP Imprint Finish (Fluid) - Intel Next-Gen Wireless-N Mini-card with Bluetooth - 50% OFF!! HP Integrated HDTV Hybrid Tuner - Full Size Backlit Keyboard - 8 Cell Lithium Ion Battery - System Recovery DVD with Genuine Windows Vista Home Premium (64-bit) - No Productivity Software - HP Home & Home Office Store in-box envelope..............
I somehow have a nick on my HDX18 LCD. From what I can see, the LCD is actually behind the front bezel. I did a google and there's only one place in the net (Pchub) I can purchased a front bezel [url] The store is in Singapore and it is a used part. There's no guarantee that the part is scratch free.
Does anyone know whether the LCD front bezel can really be replaced and anywhere else I can find the part. HP don't have them and they insist on replacing the WHOLE LCD instead of the bezel.
I'm looking for an 18.4" / nVidia GTX / Core i7 notebook; So far the HP HDX18t has been the most impressive notebook that I've found and have been interested in -- barring the CPU. Does anyone know if there's any plans for a Core i7 HDX18 notebook anytime soon?
I am a designer (graphics, website, multimedia, video) so while I don't play a lot of high end games, I do work with a lot of high quality imagery. (Note: I don't do much if any 3D rendering, so I'm safe there.)
Now I've been looking for a new laptop because the one I currently have (HP dv8000) is actually "owned" by my "day job" (also design) and I have been "let go" so the laptop has to go back. I have been very happy with this HP, and have looked at many in my search, but always seem to come back to the HPs.
Originally I was looking at another dv model - the dv7t I believe - but called HP's sales line and after a few questions the sales rep said without a doubt I need the HDX line.
So I've come to my question. I gave myself a $2k budget, so the closer to that the better, but I *do* have a little extra to play with in case something pops up. And having that extra is making my decision hard!
Should I go for the HDX16, maybe save a few bucks, or go for the HDX18 and upgrade to a dual-HDs and quad processors and the 1GB video card?
when I pop in a Blu-ray movie, I'm getting pretty anemic sound and I need to turn the volume all the way up to get it to a decent level. Even then, it's pretty weak.
However, when I'm playing a game (like WoW), the sound is big and full and I actually need to turn it down most of the time.
Why is the sound output so bad when watching BR discs? Anyone else experience this difference in volume and quality of sound? My DV7 was the same way with BR discs. Maybe there is a setting I'm missing to adjust this?
Everyone should be dumping Vista, and embracing W7, especially when you figure as a general rule you should be formatting your C drive and reloading your OS at least annually, and W7 is available freely from microsoft HERE until July 2009, and will be fully functional till March 2010. Many of us in the owners lounge have already made the jump, and you will be hard pressed to find any complaints. Who knows, they may have a discounted W7 install disc ordering link at hp.com like they do for Vista Ultimate.
One of the benefits of W7 is running XP in compatibility mode.(virtually) To run this the best way, you will need to enable "virtualization technology" in your bios, at the "system configuration" tab. LJCook wrote a nice little guide HERE.
Concerning that row of buttons above your keyboard... I am trying to refine this process, so that you need not install all the MediaSmart bloatware unless you want to, and still have a functioning row of buttons, so check back here in a few days, but in my 32 bit version, I installed the audio driver listed below, as well as the mediasmart MPV, and then the mediasmart smartmenu update, (both listed on the HP HDX driver page under Vista 32), and now I have fully functional smartmenu button control..........
This is my second HDX 18 Laptop sent by HP in the last month. I've had this one for about a week. Everything was fine when I went to bed last night. This morning when I went to start it up it stays at the first screen (the one with the bios logo and tells you to press f10 for options) sorry if I am wrong on describing that. I can get to the Bios but I get 7 loud beeps before it enters. I am now running the system diagnostic tests on it because I have NO idea what else to do!
I don't know that much about computers so I would just ask that you use beginners terms.
now I am getting something that says "Start-up Test" Failed "Boot device not found" (3F0) What does this mean?? ****
I have an HDX18 with IDT HD Sound (Vista Ultimate 64-bit). I've noticed an annoying popping sound with most applications. For instance, when using Trillian instant messenger, when I receive a message the speakers make a distinct pop at the start of the "ding" and at the end. The sound itself is clear, but always initiates and concludes with some kind of pop or click.
This is the same for all Windows sounds (which I've now disabled because of the audio annoyance). I tried disabling the Dolby effects through the IDT control panel, but that made things worse!
I have an issue on my 8 month old HP HDX18 laptop....my 3 yr old son was watching a video and accidently spilled 1/4 glass of water on the laptop.
The lappie shut off and wouldn't turn back on. I quickly disconnected it from the wall and removed the battery. Then I opened up the case up, took apart the mem, HDD and left it outside in my backyard today to dry up and then put everything together and booted up. Laptop boots up usual now BUT the wireless/volume are disabled. Some of the arrow keys are also not functioning normal either. While its obvious its not a total h/w failure, I have some doubts on the mobo/keyboard.
I do have the HP warranty but I'm pretty sure it doesn't cover water damage.
I recently purchased a pavillion HDX18. standard configuration as far as I know, see below:
Processor: Intel Core2 Duo CPU P8400 @ 2.26GHz Memory: 4,096MB (2x 2,048 SODIMM)
Graphics: NVIDIA GeForce 9600M GT
Hard drives 2 x 232GB ST9250827ASS
This is a nice system, but I have some spare cash at the moment and am looking to improve it.
What has been suggested sofar is :
Intel(R) Core(TM)2 Quad Processor QX9300 (2.53Hz) for the processor
UpGrading to 2x 4GB DDR2 or DDR3 DIMMs for a total of 8GB.
The graphics card I have been told can not be touched as it is a part of the mother board.
So the only components left where I feel I may get more speed is the drives. Saddly I have sofar been unable to find any information regarding the replacement of the current "disk drives" with solid state ones.
I have a weird behavior of my brand new HP HDX18 (running Windows Vista 64 bit).
The Laptop does not play BluRay DVDs any more. It only worked two times. I can access the BluRay file system so I assume that the BluRay drive is working. Then trying to watch the movie with either HP MediaSmart or Windows Media Center, both programs hang and need to be stopped via Task Manager.
HP support recommended a video driver update - but...
When I try to install the recommended update of the display driver from the HP HDX18 support site, it installs and the laptop remains working (I hear sounds when receiving new emails or when wiping my finger on the finger print sensor), but the result is simply a black screen. Same thing when using the nvidia beta drivers for notebook chips.
I tried to first switch to Standard VGA, then removing the old nvidia package, then installing the new driver. Same result: A black screen.
All I can do is doing a system recovery to get a working display again.
I did the BIOS update that I downloaded from the HP site as well. I currently have the Spyder software for screen calibration running.
HP support also recommended a "hard reset" of my windows installation, but since I just finished the complete installation of all programs I need, this is not what I really want.
I tried to burn recovery discs for my new rig with Sony brand DVD+Rs, and after gathering info, writing, and finally checking, it tells me it's unsuccessful (this is after burning disc 1 of 2). I've tried a few times with the same result. Anyone know what the deal is here? Do I need a special high quality disc or could it be something else?
A new BIOS update has been released by HP for current generation HDX notebooks. Please note that I am posting this for informational purposes only.
Code: SysId01=0x361B SysName01=HP HDX 16 Entertainment PC SysId02=0x361E SysName02=HP HDX 16 Entertainment PC SysId03=0x361B SysName03=HP HDX 16 Entertainment PC SysId04=0x3610 SysName04=HP HDX 18 Entertainment PC RELEASE NOTES
Version: F.23 A
Compatibility: Microsoft Windows Vista, Microsoft Windows Vista Business (64-bit), Microsoft Windows Vista Ultimate (64-bit), Microsoft Windows Vista (64-bit), Microsoft Windows Vista Ultimate (32-bit), Microsoft Windows Vista Home Premium (64-bit), Microsoft Windows Vista Home Basic (64-bit), Microsoft Windows Vista Business (32-bit), Microsoft Windows Vista Home Basic (32-bit), Microsoft Windows Vista Home Premium (32-bit)...
there seems to be a consensus that hdx16 is ddr2, but some people seem to be saying hdx18 is gddr3? this doesn't seem to make financial sense from hp's side, but it would be a factor in deciding between the two if it were true.
HP just updated several notebook models with some new features and options on their US website. I've posted a brief summary of the changes below, with those in bold as considered major. Feel free to leave comments about these new changes or let me know if I forgot something in the list below.
dv3z:Full-size back-lit keyboard ($25 upgrade from standard keyboard)80 GB Solid State Disk drive option ($350 from 160 GB base option)Slot Load Super Multi 8X DVD+/-R/RW w/Double Layer Support........................
I'm a proud new owner of a MBP 13-inch. couple of matters.
(1) A good skin/sleeve/cover/case to protect it on the go. Ideally I'd like a very lightweight and elegant skin or shell that's on all the time to protect the exterior from wear and tear, without trapping too much heat.
(2) I need a sleek padded case to carry the unit and typical accessories (charger, adapters, mouse) and other small items.
(3) I'm looking for a convenient laptop stand for my desk to set the MBP alongside an external monitor.
My case manager messed up the order on my SECOND 'replacement' notebook. She promised me upgrades across the board and messed up the order again, and forgot the screen res., fingerprint reader, extra battery, etc. So, now HP calls me and tells me that she was promoted and gave me a new case manager, Elric, who tells me there is nothing he can do and I can take it or leave it. Apparently he is one of 3 "executive" case managers and he says he is the top of the food chain.
Is there anyone else I can call to rectify this situation? Does anyone have a corporate # or something?
This has been a 6 week ordeal for me. Originally, I ordered a POS spec'd dv5t, but it came with a blown out speaker. So after hours with customer service, they gave me a case manager, Angelia, who promised me the world with upgrades and free accessories. Well, the replacement notebook she sent contained none of these upgrades. So i called her back and she said she would order a new replacement, but at that point they stopped customizing dv5t's, so she said she would order a dv7t for me. Well, she FINALLY got around to it, like 3 weeks later after having to call her constantly. We discussed the specs and I even sent her a screenshot of what I wanted so she wouldnt mess it up again. So what happens? She orders it with WXGA+ instead of WSXGA, no extra battery, no fingerprint reader, no hard drive upgrade, no tv tuner.. but she throws in a blu ray drive which i didnt even want! wow, seems like she wasnt even paying attention AGAIN. But now I cant even speak with her, as I'm sure she would some rectify this for me, as she was very cool. But this Elric guy is a complete bag.
i had a HP Pavillion dv6904ca and had sent it in for repair 4 times cause of graphics failures all of which failed to fix the problem. recently i was given a case manager, and low and behold they say they would replace the laptop for me. They decide to give me and HP HDX 16-1140us as a replacement and they tell me i need to send the laptop in first and then once recieved they would send the new laptop. so far its been about a week and a half and still no new laptop. so my question is if anyone here had to go through hp case manager to replace laptop, how long did it take to receive the new one? I know it sounds like a dumb question but i need my laptop for school and cant go very long without it.
I noticed that the front (closest to the keyboard) edge of the trackpad has come unsealed from the topcase in the center, so not only is there a bit of flex, but if I actually press down the front of the trackpad moves down independent of the case. The trackpad still works fine, but I worry this might become an issue later on. Is this a known issue? Should I contact customer support?