HP/Compaq :: Clean Install Of W7 On A Dv7t, One Unknown Device I Can't Figure Out
Nov 27, 2009
I didn't see one specific to Windows 7 driver.
Anyways, I have just about every hardware set except for this one device windows can't figure out. I have a Pavillion Dv7t-2000 series and I did a clean install of Windows 7 Home premium 32 bit. I have just about done every driver install from the driver page that pertains to my config....
So far I have downloaded:
Broadcom Wireless LAN Driver for Microsoft Windows 7
Intel PRO/Wireless Drivers for Microsoft Windows 7
IDT High Definition Audio CODEC Driver
Intel Chipset Installation Utility
ATI Mobility Radeon Video Driver
Synaptics PS/2 Port TouchPad Driver
HP Quick Launch Buttons
JMicron Card Reader Driver
HP MediaSmart MVP Software
HP MediaSmart SmartMenu
HP MediaSmart Webcam Software
HP ProtectSmart Hard Drive Protection
Lightscribe System Software...........
View 5 Replies
ADVERTISEMENT
Dec 28, 2008
I just finished doing a clean install of Vista SP1 on my new Studio 1537. Everything has gone well, however when I checked Device Manager I have one device with an exclamation mark next to it. When I clicked on the unknown device properties it tells me that it is "Intel(R) ICH9M LPC Interface Controller - 2919" I've looked all over Dell's Driver and Download site and I can't find the driver for this device nor do I know what category I should look under. When I contacted Dell's support they wanted me to unistall the device and overwrite my current BIOS version, A07, with an older version, A05. I decided that wasn't the best way so I thought I'd ask here hoping someone could help. After my install I loaded the drivers in the following order per Dell's directions: Notebook System Software, Chipset, Audio, Video, NIC Card, Dell Quickset, Wireless NIC, Touchpad. I didn't download and install the SATA drivers from Dell's website because my drive model isn't one of the ones listed for use with the driver. My drive is listed as a ST9320320AS. I'd appreciate any help someone can offer.
View 10 Replies
View Related
Jan 24, 2010
how to do a clean install and to backup the swsetup folder and to create a set of restore disks just for the hell of it and all of that...so that's not really what I need assistance with.
I was wondering if someone wouldn't mind listing all of the drivers & software that I need to reinstall after the clean OS install is done so I don't miss anything and also the order in which they are to be installed. Why am I asking this? Because this is my first HP, I've always had Dell's before and I realize HP has some other software for like the hard drive protection and stuff so I'm not very familiar with it.
I wasn't able to order my system with a blu-ray drive as their is a global shortage and it was only being offered on the DV8T...which is just way to big for me. HP says they put comments in my file/account that state when they get blu-ray drives in that they will either swap the drive out for me or give me a new computer because of the inconvienence. Now I'm not holding my breath on that but in case that doesn't pan out...is there anyway I can buy the HP blu-ray drive myself from somewhere online and then get it swapped out on my own? I would of course want it to match my machine, I wouldn't want to just get any drive. Also my video card is the GeForce 320M but from what I've read this supports blu-ray as well, yes?
View 4 Replies
View Related
Jan 9, 2009
Theres a little speck of dust thats got to be behind the glass that i cant figure out how to clean. Im about 98% sure its not a dead pixel. Can i do anything about this?
Also, i have the tv tuner. How do i start watching tv? Is it through media center? i tried it and it cant recognize it, even after i go through all the steps. when i click on live tv, it says theres not tuner card.
View 3 Replies
View Related
Nov 9, 2009
I just finished doing a clean install with the help of velocity's clean install guide.
Everything is normal, but I have "unkown devices" in my device manager. Also, the touch sensitive volume control above my keyboard works, but the graphics that pop up on the screen while adjusting the volume are not there anymore.
I have a brand new DV6T 1300 CTO, and here is the HP driver webpage. [url]
Does anyone know which drivers I probably need to update? Has anyone experienced this?
Here is a Screen shot of my device manager:
I called HP support thinking they wouldn't care if I did a clean install. The rep was sort of a jerk. He told me I need to buy a $30 recovery disk from them. I told the rep all I needed to fix was 2 little things, which arn't worth $30 in the first place. I mentioned the HP drivers webpage and asked if he would point out which drivers I probably needed to download to fix my problems, but he wouldn't tell me. He kept giving me the run around.
I did create both a backup disc and a recovery set before I did a clean install.
View 10 Replies
View Related
Jan 3, 2010
I have a Pavilion dv9730 nr laptop and installed Win 7 Pro. In my Device Hardware there are 2 unknown icons?
1st:
Location: PCI bus 7, device 9, function 2
Hardware ID: PCIVEN_1180&DEV_0843&SUBSYS_30CC103C&REV_12 PCIVEN_1180&DEV_0843&SUBSYS_30CC103C PCIVEN_1180&DEV_0843&CC_088000 PCIVEN_1180&DEV_0843&CC_0880
2nd:
Location: PCI bus 7, device 9, function 3
Hardware ID: PCIVEN_1180&DEV_0592&SUBSYS_30CC103C&REV_12 PCIVEN_1180&DEV_0592&SUBSYS_30CC103C PCIVEN_1180&DEV_0592&CC_088000 PCIVEN_1180&DEV_0592&CC_0880
View 6 Replies
View Related
Nov 7, 2009
had a pre-installed vista on my 6680ej and everything was fine, till i upgraded to windows 7. now i have an unknown device in device manager called Intel(R) ICH8M LPC Interface Controller - 2815 and i can't seem to find drivers for it.
View 5 Replies
View Related
Jul 28, 2009
after i did clean install my os, i got a driver call unknown device..i install all the driver even gpu and intel chip.. it still having this problem. i use the online dirver updated but nothing found... then i use Hp.com online chat and ask them the problem but they couldn't give me an answer. now i am hopping you guy will know...
View 3 Replies
View Related
Jul 25, 2014
I've received a used HP Pavilion G6 - 1C40CA.
There was a clean install of Windows 7 Home Premium- 64bit.
After searching around online, got a hint of what to do.
Made it to the Device Manager, these are missing or non existant (small yellow exclamation triangle):
Ethernet Controller (Hardware ID: PCI/VEN_10EC&DEV_8136)
Network Controller (Hareware ID: PCI/VEN_14E4&DEV_4727)
PCI Device (Hareware ID: PCI/VEN_10EC&DEV_5209)
SM Bus Controller (Hardware ID: PCI/VEN_1022&DEV_780B)
Along with finding the proper downloads, I'm not sure in which order I should be installing them (if there is a specific order at all), and if I need to reboot every time I install something new.
View 3 Replies
View Related
Aug 29, 2014
I'm using the W540 with an ultradock and external monitors. After upgrading my W540 to win8.1 64 bit, device manager is showing an unknown device. I'm not quite sure what it is, but almost everything seems to be working fine and Lenovo solution center isn't finding any driver updates.
I did notice that the solution center hardware scan did not test the video card memory and listed that test as N/A. Video and monitors seem to be working fine though and both nvidia and intel graphics show up in device manager.
Device manager lists the device in question as follows:
Device instance path: ROOTSYSTEM001
Hardware Ids: rootiwdbus
Device stack: DriverPnPManager
View 1 Replies
View Related
Jan 17, 2014
I have just installed Windows 8.1 x64 on my Lenovo E330.
I downloaded drivers from the website, and installed all of them. But after that there's one device listed as Unknown in device manager, and I can't figure our which device it is.
Hardware ID is {48126E0D-4BDD-4D26-8A24-569C7AB522D6}SettingsDriver, so that doesn't identify the device.
Info from Solution Centre: Product: 3354AF7
How to identify what driver I missed to install
View 8 Replies
View Related
Mar 11, 2010
I got my new laptop today, and got rid of the installed Dell Crap and installed my Windows 7 Ultimate 64-bit.
Now under my Device Manager I've got two issues:
Base System
Base System
I contacted Dell, they said they won't support my laptop since I don't have their operating system on it. All I want to know is what drivers I need. I can't believe they couldn't let me know.
View 10 Replies
View Related
Aug 4, 2014
I just bought a B590, model 20208, with, i3-3110m, 500GB HDD, GeForce 720M.I installed Win 7 64bits, but in Device Manager, before installing all the drivers appeared Other Devices an Unknown Device with thise details: code 28, Device type: Other devices; Location: on Microsoft ACPI-Compliant Embedded Controllert . After installing drivers, the problem persists.Another problem was with PCI express but resolved with Intel Management Engine Interface drivers.Other problem resolved was with the GeForce 720 M videocard; wasn't recognized but resolved with the last driver from GeForce site. the last problem remained it's The Unknown Devices.
View 3 Replies
View Related
Sep 7, 2014
I have an HP Pavilion dv5-1183cl that has been upgraded from Windows Vista to Windows 7 Ultimate (32bit) and I have some issues.I have four errors showing up in my device manager, three Base System Device and one Unknown Device, and I don't know what they are or where to get the drivers (since I don't know what they are). Additionally, the battery will not charge (there does not appear to be anything wrong with it physically). I am wondering if the below errors are related to the battery issue. Below are the hardware IDs for each error entry.
Base System Device (PCI bus 6, device 0, function 1):
PCIVEN_197B&DEV_2382&SUBSYS_3603103C&REV_00PCIVEN_197B&DEV_2382
&SUBSYS_3603103CPCIVEN_197B&DEV_2382&CC_088000PCIVEN_197B&DEV_2382&CC_0880
[Code]....
View 3 Replies
View Related
Jun 20, 2009
Decided I wanted to try out Windows 7 on my mac. I downloaded it, but can't seem to get it to install. Bootcamp says I need an installation dvd which I don't have...
I have roxio toast titanium 8 and that is about it.
View 5 Replies
View Related
Feb 21, 2010
I'm trying to install:
1.) Intel turbo boost technology driver (for i7 processors) and...
2.) Intel management engine driver
I keep getting an error message telling me that my hardware doesn't meet the minimum system requirements to install the software...which makes no sense! I've already installed the Intel chipset driver and the intel rapid storage driver AKA matrix storage driver. These two must be installed before installing the ones that are refusing to install.
I called HP, got India and the guy insists just because the driver is listed for my product doesn't mean it needs to be installed. I just kinda laughed it off, he was useless.
So I did a google search on the problem and it seems a lot of people are having the same problem getting these two drives to install-same error message and everything.
any info on IF they really need to be installed and if so, how the heck do you get them to install already?
View 15 Replies
View Related
Feb 21, 2010
I'm trying to install:
1.) Intel turbo boost technology driver and...
2.) Intel management engine driver (listed on HP's website for my product but not on this site for the thread devoted to my system and driver installations ([Drivers] HP dv6 Gen 2 / dv7 Gen 3 / dv8 / HDX16 / HDX18 (INTEL))
I keep getting an error message telling me that my hardware doesn't meet the minimum system requirements to install the software...which makes no sense! I've already installed the Intel chipset driver. This must be installed before installing the ones that are refusing to install.
I called HP, got India and the guy insists just because the driver is listed for my product doesn't mean it needs to be installed. I just kinda laughed it off, he was useless.
View 3 Replies
View Related
Dec 3, 2009
Just got my "HP Pavilion dv6-1362nr Entertainment Notebook PC".
It's loaded with #@#@ !
I tried to do a clean install. Restarted, pressed f11, did recover option of HP (not windows). But the DAMN thing did not ask me about installing the software, IT JUST INSTALLED IT!
How can I clean install it? I want it ultra-clean.
View 4 Replies
View Related
Jan 12, 2009
when it comes to HP a lot of people like to do a clean install.
Why can't the programs/files be deleted through the "Add or Remove Programs"?
View 10 Replies
View Related
Mar 26, 2010
can i know what software should i install after clean install for the best stable performance , and please me the order of installation,
View 3 Replies
View Related
Apr 24, 2009
i recently tried to do a clean install of windows vista home premium on my hp laptop, but didn't notice that the windows anytime upgrade disc i had was from my other laptop, which is 32 bit, not the 64 bit i need. Fortunately I burned system recovery discs, but I cannot get them to work. What am I doing wrong here? Ideally I'd like to avoid having to order the disc I need from microsoft if at all possible, but I cannot think of any other options.
View 5 Replies
View Related
Jul 7, 2009
I just got my new HP dv4t in the mail from costco. I was wondering are there anyways to do a clean install and get all the bloatware/junkware out of the system?it didn't come with a CD for vista or any OS.
View 6 Replies
View Related
Oct 9, 2009
The laptop I bought back in August came with Vista Home Premium 64-bit, so later this month I will be receiving the free Windows 7 "upgrade" disc from HP... My main question is, will I or won't I be able to do a clean install with just this disc?
View 4 Replies
View Related
Jan 25, 2010
I have a dv5-1235dx that i wiped clean and installed Windows 7 Professional. My first round of updates took care of most drivers like scrolling and sound. My laptop has the touch sensitive button up top for volume, mute, play, pause etc.
The volume buttons work but the volume bar no longer displays on screen and it doesnt "click" as you change the volume.
I have the HP page for drivers [url] but dont know what i need. I installed HP quick launch buttons but that didnt do it.
Does anyone know which driver it is? Also which ones should i get and is there a specific way to install them or just run them?
View 9 Replies
View Related
May 6, 2009
Installed the new Win7 RC 64bit on my DV2-1030us last night. Was really fast and easy and everything seems to be working great... but in Device Manager, there is an "Unknown Device" with a yellow exclamation mark next to it.
Upon closer inspection it says that it's location is, "on ATi PCI Express (3GIO) Filter Driver". I have no idea what this is. My internet searches have taught little about what this actually is. I have found a few HP dirver downloads for this, but when trying to install them, it just says my system doesn't meet the requirements.
It doesn't seem to be affecting the performance of my system at all and it's not that big of a deal. I just don't like having yellow exclamations in my device manager.
View 9 Replies
View Related
Mar 20, 2010
I've got a HDX-18, (X18-1374ca) Centrino Q9000 cpu, 4GB RAM, Windows 7 64bit. F.24 BIOS from factory. Had it for two months. I use this as a desktop replacement, no gaming, plugged in all the time. I have Power Options set to Balanced.
Out of the box the BIOS has the cooling fan set to run all the time. I had it that way for two months, the fan runs on what I'd say medium speed all day, never changes speed or anything all day even when the screens off and gone in to standby for ages....the fan still spins same speed, same sound. Its not annoying or loud. But I wonder how many years it will last (not as easy to change as a desktop cooling fan).
So in the BIOS I now turned the fan to always off. So its off when I am not at the laptop. But just browsing the net and typing this the fan goes off then comes on full blast for a minute and then off...and on and off, and so on. The trouble with that is the noise! The full speed fan is quite noisy, distracting. I am not complaining as I know it has to now run fast since it was off the cpu heated up.
The only place I can see to do anything else with the fan is Power Options in Control Panel, in Advanced power options, under Processor power management I can set the System cooling policy to Active or Passive....what ever that does, it doesn't make any differences.
I am curious what other people might have done. I am only trying to get it so the fan runs medium, quietly, when I am at the laptop and goes off when its in standby. It doesn't sleep, I have sleep disabled, just standby, HDDs still On.
I have a older DV9774ca and its fan comes on slow or medium speed and even off as I use the laptop, not full speed unless I have some intense graphics or video going. If I am only browsing the net the fan on that would even turn completely off, no spinning (I looked). Admitting it is s different cpu and laptop, thats the sort of behaviour I am looking for for this one.
View 3 Replies
View Related
Jan 20, 2009
Where is the WAU, Windows Anytime Upgrade folder located in dv5t? Or there isn't any and I have to get an Anytime Upgrade disk elsewhere. For those of you who did a clean install, where did you get the installation disk?
View 10 Replies
View Related
Jan 14, 2009
After a clean install of vista on my dv5z, all the drivers have been installed and everything works properly...
one thing i noticed was that the battery manager now says
Balanced
Power Saver
High Performance
instead of
HP Recommended
Power Saver
High Performance...
I was wondering if there is any benefit of having Hp recommended instead of just Balanced, and if there is a driver or fix?
View 4 Replies
View Related
Jan 20, 2009
I recently performed a clean install of Vista, all the appropriate drivers have been installed (Nothing is unaccounted for in Device Manager).
HP Quickplay and Windows Media Center both recognize the TV Tuner itself, and there is static snow whenever I select the TV viewing function.
Before the clean install, the TV function worked fine. I could pick up a few channels using the included antenna, and the cable TV adapter worked as well. Now, after the clean install, I pick up no channels. I was hoping it was just poor reception, but it no longer detects cable channels through the adapter as well.
View 9 Replies
View Related
Aug 8, 2009
I have been running my dv6700t notebook with clean install and without installing HP quicklaunch and quicktouch for almost a yr now. My blue buttons (volume, mute, media play back) are working just fine even without these installed (I have not installed quickplay, so I dont need buttons for quickplay to be working anyway). I dont care about display or sound feedback that comes up while increasing volume. So is there any other reason for these to be installed?
Only thing that I wish from these would be if they would let me increase/decrease volume quicker using blue vol. buttons. Right now it takes about 14 seconds to go from zero volume to full volume or viceversa if I constantly keep touching blue-lit vol. buttons. I like how my friends dv4t's volume zips to full from zero when he touches the same buttons. Is there any current version of these softwares that would let me do that on my dv6700t?
View 3 Replies
View Related
