I'm seriously considering to buy an HP when Windows 7 comes out, but I also hear that some of these HPs can overheat pretty bad. Maybe if you get one like an HDX, but I might go for something a little lighter, I won't be gaming extensively or anything, mainly web browsing and typing up notes for college. Is HP a pretty reliable company?
View 10 Replies
well i just cleaned up my desk, i was woundering if i put a towl/clothe over my bead the wtih laptop (cq50 compaq) ontop of it would it overheat? im getting a cooliing fan in 1 week, but i was woundering if it would hurt it. also if it does block the air way, i was using a laptop lap desk, before and it didnt get much air before, it covered the vent i thought, anyway just woundering if it would hurt my laptop, or possibly set the clothe on fire (my laptop reaches high degrees)
View 6 Replies View Relatedmy current dell studio 1555 was bought last year July it is capable of run games in good setting but the graphic card will heat up very fast, whenever the gpu rise to 100C then it will be throttled down and temp drops to 80+C and then back to normal clock speed and repeat it is very annoying for me besides, even watching HD video the gpu will also rise to 70+C i have used notebook cooler but no use to gpu is it safe? Should i call dell?
View 10 Replies View RelatedI have my 7738G(specs in sig) for 8 months now and did not have a problem til a week ago when I had my first reboot while playing Borderlands. I figured it must be the game or something since that problem did not repeat itself for a few days. I had to work all week long and I didn't get the chance to play B-lands and soon forgot about the problem.
Today I bought Lineage II Gracia Epilogue and I ran it at nat res with max settings with HDR rendering and all the flashy/fancy depth of field filters and effects turned on and guess what. My notebook keeps rebooting every 15 mins of gameplay even though I average at about 40~45 fps. Same thing happens with Borderlands, Call of Duty 4 and GRiD. Now this is really weird since my GPU temp idles at @ 47-50 degrees but whenever I start playing something it jumps to 78-80 degrees (must be the max amount til it reboots). My 4 core CPU idles at 49~54 and tops 78~81 when gaming. I want to ask you guys if you know any good method that could lower the temp, also could the high temp rates result from dust inside the machine(even though it isn't a year old), would a cooling pad make any difference?
I am going to upgrate my Acer 5672.
On tigerdirect I found 2 nice Hds
Seagate Momentus 7200.3 ST9250421AS 250GB Mobile Hard Drive - 2.5", 7200RPM, 16MB, SATA-300 for $74
and
Hitachi / TravelStar 7K200 / 200GB / 7200 / 16MB / 2.5" Mobile / SATA-150 / Hard Drive for $90
It seems to me first one is much better, more size , more speed, but I don't understand why it is cheaper.
One guy told me Segate's disks overheat laptops. Is it true ?....
So... why is it cheaper? I everything ok with this brand ?
I am also planning to add more memory, 4GB instead 1GB.
Should I be concern about overheat ?
I think my cpu and gpu temps are too high. The idle temps are: cpu: 40-50°C, gpu: 60-70°C. I'm installing WoW now, and the cpu is 74°C, the gpu 75°C. My CPU is: AMD Turion 64 x2 TL-60 (2.0 GHz), graphic card: NVIDIA GeForce 8400M G. I'm using SpeedFan to watch the temps.
View 5 Replies View RelatedAfter using my ferrari for about 3 years now it's been with me in a lot of different places, climates, dust conditions and so forth. Lately I started to notice that the laptop was kind of hot , and the primary use of my laptop is internet browsing and office applications so no heavy cpu or gpu loads. The heat was annoying problem but not annoying enough to make me do any actions. But a week ago I noticed that when I watch flash based videos (like youtibe) laptop gets really hot and after 15-20min it just shuts off or reboots . This was annoying as shit. I tried things like putting it on a try of ice, didn't help, and since I don't believe in "gay" things like those cooling pads I decided to get to the root of the problem .
First thing I noticed was that the flow of hot air from the grill around the cpu was very weak, this gave me the hint that the radiator is probably stuck with dust. The solution I came to is simple: open the body clean it and see how it works.............
had my s1555 for about half a year and didnt have much problems with it hardware wise.
but recently, after the weather started getting hotter, i noticed my internal temperatures are getting quite high, using hardware moniter, expecially the gpu, which goes up to around 80s fast.
looking at hardware moniter, it seems the gpu heats up really fast but seems to cool quite fast too, like it would jup 3 degrees at a time when in a game.
i didnt pay much attention to it until i was in the middle of a game (warcraft 3, not even a 3d intensive game) and my comp shut down by itself, most likely due to gpu overheating.
I've been using my M1710 that I built from parts over two years ago and it still runs great. But guess what sports fans...this thing does have a supreme maintenance issue. An issue that Dell has never admitted. I might even call it a design defect.
And that major issue/design defect is the fact that dust bunnies form between the cooling fan outlets and the heatsink cooling fins located on the ends of the CPU/GPU heatsinks arms. The result is that air flow is blocked and heatsink efficiency goes way down, so "baddaboom baddabing"...higher temps. If your lappy is getting hotter than normal, check your fan speeds if you have I8kfanGUI as they will most definitely be running faster than normal. As an example, my maximum fan speeds are pretty consistant at 42CPU/38GPU. Right now, as I'm typing this they are 44/40 and my CPU/GPU temps are above average so I have to do something I hate to do...
...and you'll hate it too if you're having heat problems, but it MUST be done sooner or later. You, or someone you trust, will have to carefully disassemble your lappy to remove the offending dust bunnies. This requires removing the top palm rest and power switch/hinge covers, keyboard, myriad motherboard connectors, and the video card. Of course, you'll also want to remove the battery first. Here is a link for the Dell service manual to guide you in your disassembly if you don't have access to one: [url]. Until the video card is removed you won't be able to see the dust bunnies since Dell seals the tops of the fan outlets with black tape. After peeling up the tape you'll still have to remove the fans and they will need cleaning also. This is when you'll see why your "Precious" has become a POS. If you've ever looked at the mesh filter screen on your clothes dryer you'll see the same damned thing. So what's next?
After removing the bunnies, thoroughly clean the fan blades, heatsink arm fins and don't forget to clean the bottom case inlet/outlet vents. A mini-sized vaccuum is good to start with and/or take dampened-with-water Q-Tip swabs and maybe even an old soft toothbrush to do the deed. And then?
Afterwords, carefully reassemble your lappy, but don't forget to reseal the tops of the fan exhaust areas. Electrical tape works great. If you unplugged your CMOS battery you'll have to re-enter your bios settings. After boot-up you'll notice the lappy is cooler and quieter and the fans won't be running wide-assed open as often.
Don't forget these lappies generate a lot of heat naturally and any air flow blockage yields dire results. I was quite disappointed after I installed an unlocked T7600G CPU and could crank it up in the U.S, but here in Thailand I can't run it hard above 2.33Ghz for long due to higher ambient temps. This means the cooling system is just adequate and there's not much room for poor conditions.
One more tip. I usually do this cleaning every three or four months and there's always a dust bunny, or two, even if the fans don't look too dirty. Last Spring I actually disassembled the whole unit and used a Dremel to open up the exhaust slots in the back of the case bottom to hopefully increase exhaust air flow . After re-assembly I cut up some old panty hose and taped a small piece over each case fan inlet vent to filter out the dust. If you also add the panty hose filters be careful not to block any of the vent slots with tape. I did this about six months ago and it finally needs cleaning again, so it just about doubled my maintenance interval.
Now then, why do I say this is a design defect? Simple, as this same problem has existed since the XPS Gen2 for all models with discrete graphics cards plugged into the motherboard as they're all the same design. Dell should have revised the design to avoid this problem or at least they could have made the bottom cases such that the cooling vent areas could be easily removed for access. This also should have been added to the manual as a periodic maintenance requirement. I guarantee that they've spent a huge amount of money by having to service or replace probably thousands of these for overheating over the last few years when the condition was avoidable to begin with. How sad, and moreso for the unhappy customers.
Another problem I had with my Gen2 was that the graphics card heatsink wasn't transferring heat away from the GPU and it kept overheating. It was easy to tell once the power switch cover and keyboard were removed because I could then touch the heatsink over the graphics card and it was hot as Hell while the cooling arms were much cooler.
Dell replaced the 6800 with a 7800 under warranty so I was happy at the time.
When Idling my temps : Xps 1530
Gpu- 62-75
Cpu- 70
After Gaming:
Gpu- 90's
Cpu- 80's
However, a problem appeared recently: the laptop seems to overheat and it shuts down automatically when the temperature rises a lot. I installed SpeedFan to check it and see whether it is abnormally high. Sometimes it reaches about 80-90 degrees on the 4 cores and the hard disk. Slightly before it started shutting down, the fan became very loud and it switches on and off continuously. So I don't know where the problem started.
View 10 Replies View Relatedmy Aspire 6920G.
So far got many issues with it like: a year-old battery death, CPU overheat during games, and driver issues with windows seven.
I am considering of buying a new laptop, the 5940G, which has these specs -
Display 15.6" (1366 x 768) / Intel Core i7-720QM (1.6 GHz) / RAM 4 GB / HDD 500 GB / ATI Mobility Radeon HD 4650 / Blu-ray / Wi-Fi / Buletooth / web-camera / Windows 7 Home Premium / 3 kg. $1939,00 (normal price as for Ukraine)
You can read a detailed review with pics over here [url]
What makes me think about this lap, is the Acer brand. So far i can say, that the batteries acer makes are crap, because the 6920G isn't the first laptop i experience problems with (especially the battery problem)
I have problem with my Acer 5750g. When I playing games cooler work in passive mode, like it dont know that  should work as much as possible.
Â
After 5 minuts without additional cooler it goes overheat to 100 degree and turn off instantly.
Â
When i turn my laptop on, the cooler starting work very good, like it should work all the time when it overheating. But after few secounds its turn into passive/silent mode and doesn't work properly till overheat and turn off again.
I own a acer 6930G and when I start playing game in it it feels like it's temp goes upto 200C or something! I just wanna ask if there's any program by which I can see the temp of my laptop during gameplay? (more like fraps by which I can see the frame rate during gameplay)
View 8 Replies View RelatedI have got Notebook Compaq Presario.. I cant connect to the internet using the wireless connection.. the reason is that i accidentally did some operations, and cannot switch on the light on the front panel of the notebook.. it does not work, i mean the light of the wireless connection button does not light.... I turned off something...
View 8 Replies View RelatedCan We Change Processor Of Hp Compaq Presario Which Is Having Amd Processor Right Now
View 3 Replies View Relatedi am looking to actually look, touch , try an HDX 16. But can't find a store that carries it.
View 5 Replies View Relatedwhere i could get most or all drivers for windows xp for the hdx 16t 1100,
View 5 Replies View RelatedDoes anyone have a good way to OC this laptop other than using ClockGen? I am basically wondering if there is a BIOS option. I know there are some OC guides out there, but this laptop is almost 3 years old, and as far as I can tell does not have an option in the BIOS. Also, my proc is the T2600, not the one is this review, but other than that exactly the same. I am looking to play around with this because it is old and I dont care too much if I fry it since my new hotness is on the way.
View 3 Replies View Related1. How do I make it so the volume 'screen' (the little pop-up) doesn't show up when I chance the volume?
2. Is there a way to completely remove and disable the fingerprint reader?
I'm using Vista Home Premium 64 bit.
By the looks of the bottom of my laptop it seems it might be mxm compatible as there are lots of removable pieces... including one that looks alot like an mxm slot. I know that this laptop can be configured to come with the 9200m. This is a fairly brand new model but could someone tell me whether this thin is mxm compatible?
View 4 Replies View RelatedIve just about had it with Vista on my laptop and want to try a new OS before I junk this thing. Is anyone running Win7 or Ubuntu on a HP DV5z AMD 64 bit laptop? The machine is about a year old and I have 4gb of RAM and the thing is a dog. Ive used Ubuntu in the past on Dell laptops and its a pain to get everything running wireless drivers, flash, etc. Win7 being a RC may or may not have everything up to speed on for my machine.
So, if you have Win7 or Ubuntu on a HP DV5z please give me a shout, good or bad.
I have a DV5-1155ee, here are teh sp3cs:
HP Pavilion DV5-1155Intel Mobile Core2 Duo T9400 2.53 GHz. (Montevina 6 MB L2 Cache)4 GB DDR2 RAM15.4” WXGA ScreennVIDIA GeForce 9600M GT 512 MB320 GB HDDIntegrated Webcam, Wireless, Bluetooth, BlurayWindows Vista Home Premium 32 Bit
product number: FT115EA#ABV
serial number: CNF8374VSL
what would my HDD RPM rotation speed be?
Can't really see much difference in these models....looking at Best Buy
Other than 17 vs 16 inch screen are their any benefits to build quality from 1 to the other?
I will be travelling so I would prefer the lesser HDX 16 incher but build quality is a concern
I travel by plane, train, bus every weekend so it needs to be able to handle a little beating
I'm am deciding whether to buy this laptop for school use. It has a great size, stylish, and decent specs for a laptop that is so lightweight. The only turn off is that it was made for entertainment, but should this laptop do well for word processing, spreadsheets, and web surfing?
Would the 9 cell battery last for more than 5-6 hours? My budget is also under 700$ but it can stretch a little.
i am looking to get the hp hdx 16t and was wondering if there is any bg difference between getting the 2.53 (P9400 i think) or the 2.66 processor? Is it worth the upgrade or no?
View 10 Replies View Relatedrunning a dv2 with a solid state drive? What are your thoughts? How has it performed? Have you gained much battery time?
View 4 Replies View RelatedI'm heading off to school, and these stylish, affordable notebooks have caught my eyes. The only problem is that I only get 2-3 hours of battery life on these notebooks although I can buy an extra battery. What I"m mainly doing is word processing, spreadsheets, iTunes, and web browsing but not all at the same time.
Here are my main questions and concerns:
Do these notebooks have good build quality?Is there any other way to charge the battery without having it in the notebook?Do they get hot?
I may have more questions to ask later.
I am buying this notebook in Canada.
Seeing that the battery tests I've seen on some reviews, they are surfing the internet with Wi-Fi on. I will not be, I'll usually be word processing. Should it last maybe 3 hours?
How long does the 9 cell last on the DV3?
I own a DV7-1038CA, I actually decided to buy it after reading what people said about the DV7s on this forum. Unfortunately I have a problem .
I had opened up my DV7 to clean out the fan ( ****load of dust in there) and took the whole laptop apart. I put it back together and it worked perfectly fine for about 10 hours. The laptop worked great until I dropped it down on my table at a height of about 1 1/2 inches, not a significant height but the screen immediately turned white and the laptop shut off completely. It would not turn on at all, the power light would blink for less than a second and turn off and then I'd have to wait 30 seconds before I could get it to blink again.
I then took the laptop apart again and this time I checked if everything was plugged in properly. I decided to leave the unnecessary covers off so I could turn it on without having to screw it all back on, it turned for about 3 seconds....before I noticed the display cable to my screen was on the heat sink and had caught fire. I immediately turned it off but the damage had already been done, the fire had burnt through the wiring on the inside of the cable rendering my screen useless ( whenever it was plugged the charging light on the side of the laptop would turn off). At this point the laptop was turning on but would turn off after about 5 seconds (probably due to the fact that there was no screen) During this little fiasco I had ripped off the ZIF cable that connects the power button board to the Motherboard. So now I had no way to turn my laptop on, I ordered a new screen and a new power button board.......
