i wanna format my labtop from vista to windows xp. but when i put in the setup disk. when i choose setup, it will show, can;t detect ur hard drive. I still think it is same with dell labtop, we have to change the flash.. and ata for format windows vista to windows xp.
View 5 RepliesToday i was using my HP Pavilion dv5 Laptop(Windows-Vista H.P 32-bit) at my Uni, when all of a sudden my Applications started to freeze one-by-one.. i thought it was a mere Program error that was causing it so i started Windows Task manager, and then suddenly it Froze too! next thing.. my mouse also! everything just stopped functioning
i forced Shutdown it and then turned it on again.. then.. after a minute again my apps started to freeze again.. one-by-one.. tried it again.. same result
i tried Safe-mode.. and it worked perfectly.. but i can't figure out the cause of the constant freeze..
nothing like this ever happened before since i purchased my Laptop a year ago...
so i am deciding to Format my Laptop.. but i don't know how. Can someone explain how to Format my laptop please, i heard that there is some kind of memory in the laptop that has the Drivers and everything so i'm kinda guessing i won't need a CD or anything(..right?)
When I first got my HP DV7-1285dx with Vista (64) the remote control that came with it was working fine. I upgraded to the Windows 7 beta when it came out (I didn't do a clean install) and the remote was still working and kept working throughout the several beta upgrades I did later (to newer beta versions). However when the Windows 7 RC was released earlier this week I decided to do a clean install so I backed up the important drivers and files and did a clean Windows 7 install. After that my HP remote simply stopped working, the laptop won't respond to it at all (not in Media Center and not in anything else). I was able to reinstall all the drivers (from the backup) except for one which shows as "Unknown driver" in Device Manager, and when I do a driver update and point Windows to the folder including my backed up drivers, it does recognize the device as the "HP Mobile Data Protection Sensor" but says it encountered an error installing the driver software since it "couldn't find the file specified."
I don't know if this "Unknown driver" is in anyway connected to the Remote Control problem. I have no other problems showing in device manager by the way.
Also in an unrelated matter, I am trying to reinstall the MediaSmart software the came with the laptop. I downloaded the packages from the HP website but they won't install (since they're only update packages and not standalone installers I guess) so is there any way to reinstall the MediaSmart software from the recovery discs/partition?
I got a Sony camcorder for Christmas. Right now I have an Sony SR with 2.53ghz processor, 320 7200 rpm HD, 4gigs of ram, and an ATI radeon HD 3470 graphics card. My AW-190 was stolen so I can get a new laptop. What do you think is the optimum setup for file transfers, fast computing, etc?
View 10 Replies View RelatedGot a new laptop a few days back (6730b), which is alot nicer than the nx7400 i had. When i got it, it came with vista business and a whole load of 'bloatware' i didnt need. so i did as i normally do and formatted the pc and re-installed vista (although XP was very tempting). I finally got round to getting everything how i want it but i've realised since formatting the battery life seems to be less than it used to be....
before the format, when the battery was full it would say i had 4hrs+ of battery life (i even remember seeing it say 5hrs once). Now it says 2hr 30 mins on 'HP optimized', 2hr 45 on power save!
I got the HP HDX16 and I want to change the OS to Vista Ultimate 64 or Windows 7 64bit RC.
Thing is, I didnt find the programs that came with the notebook at the HP website. For example, Microsoft Works, Cyberlink DVD Suite, HP recovery manager etc.
Is there any way to install them after the format? Or do I have to get stuck with Home Premium?
I have an old HP Compaq 6710b laptop and I'm trying to get Minecraft running. It ran on windows 7 a few months ago but now I upgraded to Windows 8 and I have the latest video driver on Windows Update because I can't find the video driver for Windows 8, how to get Minecraft running?
Â
I have the bought version of the game.
I also got it running on Ubuntu.
Â
Minecraft log:
Â
---- Minecraft Crash Report ----// I bet Cylons wouldn't have this problem.
Time: 4/26/14 1:36 PMDescription: Initializing game
org.lwjgl.LWJGLException: Pixel format not acceleratedat org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelFormat(Native Method)at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat(WindowsPeerInfo.java:52)at org.lwjgl.opengl.WindowsDisplay.createWindow(WindowsDisplay.java:244)at
[code]....
I’ve just done a clean install of my Dell Vostro -- reinstalling vista and removing the recovery partition in the process. Outcome = a ‘cleaner’ machine with none of the preinstalled bloatware/c**p from Dell. (first time I’ve done anything like this, but followed a brill guide in the Dell section of this forum ).
I’m about to tackle my Mums Compaq Presario C310EA. The aim is to remove all the rubbish she has accumulated over the years, incl any spyware/ adware she may have, and generally have a bit of a clean sweep…. hopefully resulting in a faster laptop. I’m backing up her data, and moving some of my Dad’s stuff somewhere else.
Basically I want to clean up as much as poss, but unfortunately she has no xp disk, just the recovery disks (cds) she burned when she first got the laptop.
As she has no xp disk I guess the best I can hope for is to reset the laptop to the factory settings (?) .. not ideal, but I don’t think the (factory set) bloatware is too much of an issue for her – she’s not a heavy user.
Should I use the recovery partition for this, or do I need to use the cds she burned? .
I’d like to know the best approach – and can’t seem to find a set of instructions to follow.
I am both a mac and windows (only for gaming related things) user. I use an external WD passport hard 500GB hard drive for all my data. Its formated to mac journaled. This is very good for mac related work because it can handle files over 4GB. However if i have a game patch or mod I want to download in OSX and transfer over to windows via my external ( windows partition is formated in ntfs , because it was not working in fat32, i tried like 9 times) it is impossible because windows can not understand the hard drive is thier ( I have tried software to correct this but im very skeptical because it killed the file system and everything became corrupted)
I know its complicated but that was the first issue. The second issue is, I want to buy a new HDD thats fat 32. I want to keep it that way because when i formated this one to mac, it started acting a little crazy and could die any day now i think. It makes random beeps once a day and a grinding noise. This started happing right after i formated to mac journaled.
I was under Windows Seven when i got some virus problems. i format my whole HDD and start to have some problems. sometimes the computer randomly stops. Often when i'm copying files or defrag the disk. there, my laptop seems very hot. it shutdown when I play (whatever the game played the temperature are (according to SpeedFan) about 100°C))
I firstly think about dust. so i have clean by removing the trap at the bottom and cleaning the ventilation holes.
That change nothing. my computers stops 10 minutes after the game's started. but it boot right now after it stops, (i've head that in case of a too ward hardware the computer will not boot right now after it stops) metimes after a program ask a reboot and i say yes , the fan don't work at all after the reboot.
here we go......formated my laptop and removed XP, had vista on it at new but wiped it when i got it.
So i wiped it last night and reinstalled XP again, thought i had all the drivers but my device manager is showing Video Controller and Network Controller are not installed correctly.
Would the Network controller stop my wireless working because thats my main problem
getting my wireless set up. I even tried resorting back to Vista with the alt-F10 buttons but all its doing is bleaping.
Can i get it back to Vista, my daughter says she wants it and where exactly do i get the drivers i mentioned i'm missing.
Once windows xp is installed do i go to control panel and set up wireless ? if i remember i'm sure it all went on automatic the 1st time i wiped it.
I had facing a problem after format my laptop. The problem is i cannot Install my Windows Vista.
I using Original Windows Vista. But my laptop cannot finish the installation. The message is Windows Error Recovery. Please leave me a message if you know why.
how do i format, cleaning my hardrive, and what will be removed, and do i need to do anything? If i format did i need t backup windows to a disk or can i format without backing anything up to disk, in otherwords everything to format is on my Laptop(Aspire 6920g)? I dont need to save files, just my saved games
View 9 Replies View Relatedhow to partition my hdd?
(using Acer Recovery CD to install Win XP)
I have an Acer Ferrari 3000Lmi notebook.
I just replaced the hdd with a new one.
it's 80GB 5400 rpm, IDE
It's not formatted and it's not partitioned.
My notebook is an old model,
so I don't think there's a recovery partition and it doesn't have an e-empowering acer button, etc.
It only comes with Acer recovery CD's.
when I put the new hdd in, it's detected in bios,
so I installed Win XP Home using the Acer Recovery CD.
and it didn't have option to format or to partition my hdd there.
everything just ran automatically.
and now I have one C: drive.
Can anyone help me on how to partition my hdd ?
I prefer not to use partition magic/other programs to partition my hdd.
I don't know if I have DOS.
I don't mind installing XP all over again, I just don't know how to format/partition the hdd before using the recovery CD.
If I rightclick then selected format and then OK Will it harm my computer? I want to erase everything. Should i even bother erasing the D Drive?
View 4 Replies View RelatedI have had to fdisk my laptop because of various viruses it had and a keylogger. i want to put a copy of Xp on the machine but when i try it says it cant find any hard drives, it originally had vista home on it but i got no disks with it so i can't reinstall that either? The message i get when trying to install Xp is: "Setup did not find any hard disk drives installed in your computer. Make sure any hard disk drives are powered on and properly connected to your computer, and that any disk-related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or setup program.
View 4 Replies View RelatedI am formatting my friends hard drive and loading Windows. He wants only the basic drivers for teh notebook and none of the other Acer crap that pre installed. Can anyone tell me what these basic drivers are? Also I need to know if there is a correct order to install them in. I'm very familiar with Dell's and there is a specific order for them, but this is the first Acer I've done.
View 5 Replies View Relatedmy note book is acer aspire 4920 and my Problem is i have make format for my computer and now i press alt+f10 to rostore system to factory settings but it dosent work so any one please who have acer recovery discs system , please upload these discs and give it to me please because in these discs i can repair/restore my pc to factory settings
View 4 Replies View RelatedIve always used FAT32 for compatibility on ext. HDDs, but now i need to put a massive 100GB image on an ext. drive, how should i format the drive so that both a Macbook and an XP computer can access it?
View 4 Replies View RelatedI want to use my desktop to install XP on a notebook drive that I will then put in an Insiron 8000 notebook. It's too long to explain why I don't just use the notebook to do this.
So, is it possible to do with the PC? I assume I have to get a special type of connecting cable, but can it power the external notebook drive and can the data transfer handle a Windows full install and, finally, from where on the PC do I connect it?
I've been reading threads and guides (1, 2) on how to format and reinstall, but I have one more question:
My friend owns an Inspiron but lost his recovery DVDs. In order to format his C: and reinstall Windows from the recovery partition, he should hit Ctrl+F11 at Dell logo and follow instrucions to format?
My wifes Extensa 5620 got a virus. Office Depot removed it with MalBytes. I'm still leary of something being missed. I would really like to restore it to factory defaults.
When I go into Acer eRecovery Management I see pick the Restore tab at the bottom of the window.
Now I am given the choices to
1.Restore system factory default.
2.(Which is grayed out and option not avaialable) Restore form users backup
3.Recover from CD/DVD
4.Reinstall applaications/drivers.
So I pick 1. Restore system factory default.
Next I am asked for the empowering technology password. Well I don't have it and don't know how to get it. I would choose number 2. if it were an option. If I place the disk I made into the CD/DVD unit will the option become available? I tried option 3. and it said to place the restore disk inthe drive.
I recently had some trouble with my Acer Aspire 5920 notebook. A virus got through to it (luckily without any major damage).
I sent the notebook repairs and I already got it back and working...almost...completely as new.
I wanted to format the notebook and reinstall the necessary programs. This way I can get rid of all the stuff I don't need/want.
The problem is that eRecovery from the eEmpowerment tools needs a password to start the formatting. Normally if you don't fill in a password in the first place then there's no password needed when you want to format the system.
In my case, the notebook asks for the password anyway so my question is this:
How can I format my notebook (using eRecovery or another application) without the password?
I am trying to fix my dads notebook, its been running very slow lately and I want to format and reinstall Vista for him, however has most of you may know, it's really hard to find notebook drivers (well in my case it is), so does anyone know where I can find drivers for me dads 5634WLMi?
I have tryed Acer's website but they are either for 5630 or 5680/90, or can I use the 5630 drivers on this?
I've been having major problems browsing the internet lately. Safari won't stay open for more than 2 minutes without crashing and Firefox will half the time not format web pages correctly. For example, as I'm typing this in FF right now, in my tool bar up above this text box I have the boxes with bold, italics and underline options showing, but I can't select them. Even worse, the rest of where boxes should be just have text, for example it says Align Left, Align Center and Align Right instead of having selectable boxes. What is up with my browsers?
View 6 Replies View RelatedHow do I format my c: and re-install windows 7 again?
I did not get any cd/dvd when I bought my laptop.
My details:
Laptop: Inspiron 15r
OS: Windows 7 Home Basic (64-Bit)
Note: I used to do it every 4-5 months when I had my desktop and windows xp cd.
I've got an HP Pavilion dv7 Notebook PC WA794UA#ABA CNF0162R76.Â
Â
Every time I try to play a Blu-Ray disc in my Blu-Ray player I'm getting a "Format Not Supported" Message in HP MediaSmart DVD Player.Â
I am unable to format my laptop (vista home pre-installed) and tried to install with xp professional on vostro 1400.
i am getting the error as "unable to identity drives to install" on the boot screen while formatting. Do anyone can help me to figure it out
i have a quick question... i'm running an xps 1530 (first run) with a 2.2 dual core, 4gb ram, 7200 rpm drive, and the 8600 GT card.
i today ran a system restore to clean everything up, with a format. is that as good as a full format/reinstall of vista? it seems to be running pretty well.
my main question is this... i've gotten back into WoW, and i'm having some hitching running it on max settings... should i have that issue? i feel like this should completely destroy that game.
I have the original yoga 13  128gb and  i recently bought anther 128gb same model from ebay. when i installed it it already came windows and all the partiion. i dont need that stuff i just want to use it as a second  hard drive for storage puropses. the problem i am having is deleting all the content and combining all the partiion to one.
Â
how do i delete the parttition and format the SSD
Â
as you can see in the image bellow i new the disk 1 to be just  SSD for storage purposesÂ