Trying to get BT capabilities on my NX7400 and found the right card for it, but the seller warns I may need some kind of a cable to connect it. I'm trying to find out if this model comes standard with that cable or not.
View 3 RepliesIs it possible to install a bluetooth module on a aspire e1-571? If so, where do i get one?
View 1 Replies View RelatedI have a year old DV9774ca with bluetooth. I never used it. My wife has a Toshiba laptop without bluetooth and wants to use a bluetooth mouse. Can I take out my bluetooth adapter and put it in hers? I have not seen or handled one before.
Its ays its a HP Integrated Bluetooth Module. The "integrated" doesn't make it sound as simple as I hoped!
I bought at DELL OUTLET a M6400 without the Bluetooth Module, I will buy it separate from DELL, do you know if the Bluetooth antenas will be Pre-Wired in the notebook ?,
actually I am buying the DELL 410 Bluetooth + UWB card, meaning I need the Pre-Wiring for Bluetooth and UWB ?
Today when I wanted to turn on the laptop, the screen was RED. I tried couple of times again, with connected to the power AC and without, but it starts Windows and everything is working, but my screen is still RED. I connected the laptop to an external monitor to check if the graphic card is causing the problem, but no, the picture was perfect. So I'm guessing it is something with inverters or the hole LCD. Do you have any ideas? And is is possible to buy spare parts from HP (I live in Germany)?
It is a HP NX7400 with WXGA (1280x800) Display.
Is there a possibility of installing a 3G/LTE module on the Thinkpad Yoga? To my understanding there is an m.sata slot on the Yoga that allows for us to put extra SSD hard drives on it. Is it possible to replace it?
If not, are there other methods other than using usb-dongles or hotspots?
i am asking for adding new m-sata ssd drive in WWAN slot in dell latitude e5430
or in PCI-Express slot
is this operation possible or this not allowed in this model ?
this is the msata model [URL]
I've been using my nx7400 for more than 3 years. I undervolted it with RM Clock and it was always running around 45-52 degrees idle and 53-59 under load. The fan only kicked in under load and over 55 degrees.
I changed the CPU fan for a new one, I changed the thermal paste for MX-3 and I regularly use compressed air to clean the heat sink.
Lately, it's running full throttle in intervals even in idle and temperatures 45-50. (5-15 seconds full throttle, 10 seconds inaudible... and so on)
I could always leave it on my nightstand 24/7 as it was inaudible.
can anyone show me a pic of the screws i need to install a bluetooth module on my studio 1737? i got an old apple ibook thats broken so i tore that apart to get a look at the inside hehe and i was thinkin i could use one of those screws?
View 5 Replies View Relatedwhere i can get the bluetooth module from mine didn't come with it added as standard, so using a dongle i have took the back off and i see there is a small empty bay next to the wireless card so guess that is were the bluetooth module goes
View 4 Replies View RelatedSilly me, I forgot to select it when I purchased the computer.
I would like to buy it and install it myself, but I am not sure which one to buy since none of them expressly say they are for the m1530.
Some examples:
http://accessories.dell.com/sna/prod...1&sku=430-1828
http://accessories.dell.com/sna/prod...1&sku=430-2529
http://accessories.dell.com/sna/prod...1&sku=430-2567 .....
I wanted to add Bluetooth to my laptop so that I could get a wireless mouse (and down the road, a wireless keyboard as well). I know I could have went with some sort of RF wireless, but I just know that somewhere down the line I would end up losing the dongle -- so BT was the best bet!
Made my purchase 7/21 early in the AM, and my items arrived on 7/22 in the afternoon! I live in Indy, and the items came from near Dayton, Ohio... but still, talk about free shipping! I also purchased a new SwissGear/Wenger backpack, and that shipped separately from South Bend, Indiana -- and also arrived today on 7/22.
Went to install the BT module in my laptop, and my worst fear was true -- Dell sent me the wrong screws! There were many reviews on the Dell site about them sending out the wrong screws, and I was afraid it would happen, and unfortunately it did. I went through all my screws, and could not find anything that would fit... so, so that I could test the module I temporarily left it installed without being screwed it. The install was uber-easy, connect up the blue antenna, and done!
I really like this travel mouse, as well. I put some rechargeable batteries in it which I hope will help it last for quite a while. Its slightly larger than my previous wired travel mouse (from Logitech), but I like that. It isnt anywhere near being a full-size mouse, but its a good size for me. A little heavy with two AA batteries in it, but not terrible or anything. I'd might try to find a little pouch to stuff it in when taking it with me, for a little extra scratch-protection and what-not. Oh, I got the matte black version, cuz I hate glossy things that show fingerprints
I chatted with Dell tonight, and they are "supposedly" sending me the proper screws... in 3-5 business days. I tried to get them to upgrade that to overnight shipping so I would definitely have them this week, but they absolutely refused to do that. So now I need to shut the laptop back down and remove the BT card because I don't like the idea of it just dangling in there not being screwed down.
Anyway, thats my experience. My first attempt at an upgrade to my Studio 15 (1537). Next will be a back-lit keyboard, when the finances are not so ... strained After that, maybe a bluetooth keyboard if I can find a decent one that isn't like a bajillion dollars
Been away a long time, mainly because my latitude has been working beautifully!
I am considering buying a bluetooth wireless speaker system.
Am I right in saying the BT 360 module on my latitude is A2DP compatible?
I have an HP Compaq nx7400. I've had it for over 3 years now. I've never changed its battery ever since I bought it.
Specs: [url]
Over the past few weeks, I've been having an unusual problem. Whenever I plug the AC adapter to my laptop, the whole laptop performance - from the second I switch it on - is very slow. The moment I pull the AC adapter from the laptop, it instantly operates at a normal and fast speed again!
I figured that it must have been a problem with the AC adapter (it's had its fair share of use - being swung around and dragged to lectures...). So I ordered another one off Ebay. Today, I got the new adapter and when I plugged it in, the laptop only went on AC power. It worked fine - fast as normal. However, it was not charging - just on AC power. I am starting to question if the adapter was really as "genuine" like it was advertised on eBay. But anyway... after about 4 hours with the new adapter on AC power, it stopped recognizing the battery altogether and alerted me with a Critical Battery sign. Of course, a few minutes later, it went dead on me - the laptop switched off. It was as if I removed the AC adapter myself, only I hadn't. Now, I am trying to plug it in again (the new one), to see if it will be able to power up again and it just won't respond at all.
On the other hand, when I put the old AC adapter, the laptop switches on but doesn't charge. Again, it is extremely slow with the adapter on, and fast when I pull the wire out. Only for a minute or so until it dies on me again...
I have bought a new Studio XPS 1640 laptop without the 370 bluetooth module and I was wondering if i can buy it off eBay.
The module is a Dell 370 and it's compatible with the studio 1535. Will it be comaptible to my XPS 1640?
how to fit an internal bluetooth module to the 5536... or even know where the connector is located ?
I had a quick look under the memory and HDD panels but could only find the WLAN module (which i'm also upgrading to wireless n) but couldn't see anything obvious.
Anyone knows what will work with this laptop ?
A reviewer in newegg said he added one without any problems.....
[url]
I recent bought another y550 IdeaPad running Win7 because I like the one I already had that my wife uses. The new y550 came with a Broadcom bluetooth module but the computer did not recognize the module during startup. I thought the module may have been bad so I bought another one on eBay that had be tested by the seller. I finally found the location of the module by taking the computer apart. (It is located under the palm rest bezel.) When I installed the device and put the computer back together (except the keyboard for access to the bluetooth module socket located under the keyboard), the computer hung up while it loaded but the bluetooth icon on the speaker panel continued to be lit.
I unplugged the module to restart the computer and plugged the module back in. Windows recognized the device and the drivers were loaded. I put keyboard back in place and the device worked until I accessed the BIOS on the next start up. After that, the module was never discovered by the computer regardless of deleting the drivers for the module and the energy management software, etc.
When I reboot the machine, the computer never seems to look at the bluetooth module because the bluetooth light never illuminates. Also, the Fn+F5 short cut does not show a bluetooth device as being installed on the computer. How to get the computer to recognize the bluetooth device since I think it might be a machine issue or BIOS issue rather than a windows 7 issue.
I've a brand new Dell lattitude 5530 with a Dell wireless 380 Bluetooth Card. I've downloded the driver module recommended by the Dell driver support webpage when I supplied my Sevice Tag. (DW380 Software release Customer installer Version 6.5.1.2410 ). However the module failed to install. The last few lines of the log file are:
[03/27/13 14:26:10] (MUPXMLParser::GetResultName): *** Vendor Return Code is not found in Mup.xml[03/27/13 14:26:10] Name of Exit Code: [03/27/13 14:26:10] (DupAPI::GetReturnCode): *** Unable to find DUP value for: [03/27/13 14:26:10] Exit Code set to: 1 (0x1)[03/27/13 14:26:10] Result: FAILURE
What I need to do to get this one to install?
I am installing Windows XP on my Compaq Presario R3200 (servicetag R3484EA). My problem is that I cannot find the driver for the Bluetooth device.
According to device control it concerns the HP integrated Bluetooth module. Under details the following information is displayed: USBVID_03F0&PID_011D-010C65A2BF4.
I just ordered a Studio 14z from dell.
- C2D 6600
- 3gb ddr3 Ram
- 320gb 7.2k
- 900p lcd
- backlit keyboard
The only option I missed out on was the internal bluetooth.
So I read the Service Manual for the 14z and it doesn't seem like it would be to much trouble to manually install the 365 module. Also I found the 365 internal module on ebay WITH the mounting screws. It seems like a perfect fit.
I installed windows 7 on my studio 1537, but can't find bluetooth adaptor in device manager.
I also turned it on before installing. The LED turns on too.
I ordered a Bluetooth card from Dell for my Studio 17, and I was wondering if anyone has installed one of these yet. I already have the WLAN card installed which is for the WiFi operations and Im wondering how hard of a job it is to install the Bluetooth card.
I already added a second hard drive to my laptop so going inside of it isnt a problem I know what Im doing but have no clue where the Wireless cards are mounted. Im hoping the Bluetooth slot is marked so I know where it goes.
i need some information regarding installing original bluetooth in an Acer aspire 5920g.. i know it has been discussed in the past Does the 5920 have blue-tooth? but since this thread is locked i guess i have to ask in a new thread..
The ones who tried it, how easy was it? from the manual it didn't seem too hard the only think that seems kind of dificulty was removing the keyboard..Is there any trick for it?
Also what is the odd module?
Regarding the heat grease, it was mentioned in the other thread
"Heat grease:
When re-assembling and when you're about to put in the thermal module, make sure there's adequate heat grease on the CPU (don't put TOO much on). Sometimes taking off the thermal module can upset the heat grease, you want to make sure there's a good thermal path for the CPU."
Is this, only in case we notice that there isn't adequate amount? or should be applied some in any case?
I have downloaded the blutooth driver from HP 15-d002tx Notebook PC Drivers. I am using windows 7 64 bit OS. Before i used to use bluetooth dongle. I uninstalled this driver from device manager. After this i tried to installed the bluetooth driver which i have downloaded from Hp main site it is showing me error like The device may not be present or could have been ejected/unplugged from the system.
View 5 Replies View RelatedBecause G510 wasn't really Windows 7 compatible, I decided to upgrade to Windows 8.1. But after the upgrade, there's no more Bluetooth. When I run Bluetooth setup from drivers DVD, it doesn't install because it can't find required device. Also at tjhe Device Manager, it doesn't show anything related to Bluetooth.
What happened to Bluetooth and how can I get it back?
I had to reisntall the factory default software to original. The problem is the Wifi and bluetooth drivers do not install. I tried installing several versions from the lenovo download site but i either get "No Matched Wireless or nothing depending on which one I try to install.
The Laptop is a Lenovo B570, Model Name 1068. Running Windows 7 64 bit.
I have brought a new dell studio 1435 laptop and they provided me with default windows vista home premiun OS.
I have installed windows XP professional OS after changing the BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
Can i will be able to install the windows vista OS after installing windows Xp with the same BIOS settings for onboard devices (In BIOS:
Onboard Devices -> Flash Cache Module -> Set Off
Onboard Devices -> SATA Operation -> Set ATA)
I recently recieved HP dv5-1119nr as a gift for Christmas. It has a Windows Vista Home Premium 64-Bit OS. I am a DJ and Use Numarks Virtual Vinyl audio Interface which is for my turntables. I have no complaints with the notebook. Unfortunately, the interface is not compatible with 64-Bit, and according to Numark may not be anytime soon. I had a friend upload his Vista 32-Bit OS for me to download, as a matter of fact he sent me two to choose from. I have (frustratingly) tried multple times to burn and re-install a 32-Bit system. I have tried using Cyberlink DVD Suite to save the .iso file (I understand that). It shows up looking like a winrar file, but in properties it does say .iso. Once burn is finished I try to reboot. Under BIOS, CD Drive is enabled and first. But it doesn't Boot! Upon looking at the disc it shows 2 files; BOOTCTG.BIN and BOOTIMG.BIN. What am I doing wrong?
View 3 Replies View RelatedJust bought a new 2.5 HDD for my laptop. It's suppose to arrive tomorrow and I thought I'd get on the front side of the installation. Is there anything I should be knowing beyond a simple 'unscrew the bay cover on the bottom of the dv7, unscrew and remove the old drive, unscrew the old drive from the caddy, screw the new drive into the caddy, place the new drive/caddy assembly into the same bay, push the assembly into the connector slot, screw the caddy down, button up the dv7, and do a clean install of Windows 7'? I've been told that I may have to do some special type of reformatting before initial and first use of the new drive or else it may not work properly. Is this true?
I've also heard that some BIOS adjustments might allow me to use both the old and new drives,... true? Will using a 7200 rpm drive in one bay along with a 5400 rpm drive in the second bay cause problems? If not, should I dedicate the faster drive to holding data or elect for it to be the boot drive?
I've tried finding something on HP's site with very little success.