my dv2000t that I use for school and docked at home now has a blue tint on external monitor.
HP wants to repair, so i have a few options:
1. Pay and repair
2. Get a mini-desktop and use the home monitor with mac mini, no external monitor for laptop(Looking at the Mac Mini)
3. Get a USB-to-VGA or similar (laggy though)
4. New laptop.
i dissasembled my presario cq60 and when i put it together the monitor won't activate.
i tried using an external monitor and the monitor refused to turn on from standby, a safety feature of the monitor. the small card in the underneath with 2 wires leading 2 the monitor, (i assume that is the laptop version of a graphics card) is fine, inserted properly, and i had a slight issue with the plugs fitting, but that was soon resolved.
Hp Envy 6t-1000 has a green tint to the monitor. There seems to be no black color. I ran the system diagnostics and everything passes. If I tyr the color palette check it fails. I have updated the video drivers, updated the BIOS, replaced the monitor cable and run a system recovery using the disks provided by HP. All to no avail. I can attach an extrenal monitor, either HDMI or USB, and it works. Only the built in display has the green tint and lack of black palette.
View 1 Replies View Related17" UltraSharp™ WXGA+ (1440x900) LCD Display
NVIDIA Quadro FX 2700M, 512MB Discrete
Windows XP Pro
I got my Dell M6400 in about 10 days ago and immediately noticed a bluish/purplish tint in the grays. I compared it to my other two laptops and several desktops and it is definitely off. I connected my desktop monitor to the video out on the M6400 and it looks like it is suppose to.
After trying about everything possible, I contacted support and they immediately sent someone out to replace the LCD. The tech noticed it as well and agreed that it was not (or at least should not) be normal. I have never seen a screen do this before.
At any rate... Dell is sending me a new machine, but I am worried that this might be something that is inherent with this video card and LG screen combination.
I simply cannot imagine this being inherent and Dell allowing laptops to go out with the problem. I can't even imagine how they could have tested the screen and not noticed the problem.
Im not sure if other owners of this laptop have this problem, but the screen display has a blue tint to it. Ive tried adjusting the color in the graphic property, but i can never seem to get it right so the colors on pictures are never accurately depicted when compared to my other laptops or monitors.
View 7 Replies View RelatedCan I run the notebook closed and just have it hooked up to an external monitor?
View 7 Replies View Relatedhow to get an external monitor working with a HP DV9700 laptop? The screen is cracked and it's totally white, so I'm unable to do anything through the BIOS, desktop, etc.
I've tried Fn-f4 and every other f button combination.
The laptop is plugged into the mains, so there should be sufficient power for an external monitor.
I've also re-booted the laptop with the monitor connected and switched on.
There is no option to switch on the laptop with the lid closed, due to the position of the on-off switch.
The laptop is not networked, so I can't access the hard drive any other way.
I try it without the battery (not sure why?), but that didn't work either.
I have a DV7T on order. How large of a monitor can it push without slowing down?
I'd like to use a 22-24" if possible.
ordered another LCD and tried to replace it, to no avail. I opened it up and everything was hooked up right. Then I tried the other LCD, he gave me with it. Same thing. When I hit the fn f4 in vista, it appears to try to switch but the LCD never comes up. Also, when switching display modes, the LCD will flicker breifly (VERY BREIF). This does not smell like a video adapter or motherboard problem. I am still working on it and researching but figured I would see what all of you thought.
View 8 Replies View RelatedI have connected my monitor to an external monitor. It works fine. Only problem I have ( and a little irritating one) is that the external monitor picks up display only after Windows is loaded. Pre-OS screens like BIOS settings, GRUB loader (I have Installed Linux ) doesn't show up)
Is this an issue with BIOS? Because, when I connect HP dv6000 to my monitor, I can see the BIOS screen as well. I am sure the problem is not with the monitor.
The BIOS is responsible for detecting displays before the OS is loaded right? I checked BIOS settings and there is nothing to indicate the display ports/devices (however, this page on HP website shows a BIOS screen "Advanced" which apparently has those settings)
I recently just purchased and received a fancy Dell e6400 from one of the many dell deals. My eyes are light sensitive from looking at many computer screens over the years and due to this I avoid LCD screens and much prefer flat CRT monitors. My goal is to use the e6400 as my workstation computer while using the VGA out to power my 19in Sony CRT .....
View 6 Replies View RelatedI have an hp compaq nx6330 (ex856av) using windows xp. last may, the screen turned black (i was told i need to replace the lcd), so i decided to use a generic external monitor. a couple of months ago, i had to have it repaired and the repair guy said he'll upgrade the OS to windows 7. things were working fine for about a month then the screen (external monitor, since the laptop screen is dead) starting having vertical gey lines (the entire screen). i played with the resolution and i was able to get rid ofthe lines a couple of times. are the lines due to using windows7? can this particular model handle any OS besides the one (windows xp) it came with?Â
View 1 Replies View RelatedRunning Win XP on dv2000t. The Windows shutdown menu has 3 options which are RESTART, TURN OFF and STANDBY. When I click STANDBY the computer appears to turn off. I can't get it to turn back on except by restarting with the power button. Is there some special key combination I need to know? Apparently the computer shuts off when I click STANDBY.
View 3 Replies View RelatedSo I came home today to find that my beloved HP dv2108tx that worked perfectly well last night just died on me. When I turned it on, the power did run but only gave a blank black screen and emitted 3 screeches after that (1 long one followed by 2 short ones).
I got so nervous because there's so much valuable information in my hard drive. And so I googled and googled and surprisingly found out that about a million other HP users out there also faced this same problem as I did. In fact, I should consider myself lucky that mine lasted as long as 2 years and 3 months.
A few websites I found suggested replacing the Mainboard e.g
[url]
[url]
The problem is, this could very well cost me $300-$400 and based on previous posts, it seems that this mainboard replacement might not be long-lasting.
what I should do?
1) Invest on a new mainboard...and hope for the best that this time it willl last for another 2-3 years
2) figure out a way to fix this myself without replacing the mainboard --- is there a way?
3) Just throw away this laptop, forget about it, and curse HP forever
Either way, I will need a way to retrieve important information from my harddrive asap.
I ran into a screen problem on my 2.5 years old HP DV2000t laptop. At first, upon powering up one day, the screen went very dim, barely visible. Upon restarting the computer a couple of times, the light came back on (somehow) but the colors are now very odd: overexposed and washed out and with pixels visible throughout, like on older TV screens. The problem seems related to hardware, as tapping the screen changes the lighting slightly, either a tad darker or lighter. When the screen was dim, I was inclined to think that a backlight lamp needed to be replaced, but not now with the light back on. Can the problem be due to the malfunctioning inverter board? Other possibilities and solutions?
View 4 Replies View RelatedMy dv2000t came with Vista installed but Vista is now broken and gone and I want to install WinXP instead. I installed XP but XP cant find any network adapter on the laptop. I have an ethernet cable plugged in to the laptop. Prior to this there was no problem connecting to the internet with this machine. Win XP can't find the network adapter therefore I can't use the internet at all. Since this dv2000t came with Vista installed maybe the network adapter requires something not available in XP therefore you can only use it with Vista loaded.
why XP can't find any network adapter on this dv2000t?
This dv2000t came with Vista installed but Vista is now broken and erased. I installed WinXP in place of Vista and I notice many of the hardware devices show yellow question mark icons in Windows device manager. The yellow question mark means no driver is installed for the device. I went to the HP driver download page (using a different computer because no network driver for the dv2000t) and I found MANY drivers for dv2000t hardware devices for which I have no driver. I can't tell which specific drivers I need. For example there are drivers for more than one type of network adapter but I don't know which adapter is in my dv2000t. Also the same situation for other hardware devices with missing drivers: the HP site has multiple drivers available and I don't know which one I need. OK
OK there is a service tag on the dv2000t which says:
SERIAL #: 2CE71317GD
PART #: RM669AV
I want to buy an external monitor for my sony z590. I was wondering what resolution the graphics card on the laptop can support. I want to maintain the same 16:9 aspect ratio, so i'm looking at monitors with 1600x900 or 2048x1152.
Does anyone have any experience with this? The only reason I'm looking at the 2048x1152 is because I want to have the same clarity and sharpness on the monitor as I do on the laptop screen.
I'm on the lookout for external monitors (20-24" WS) that work well with MBPs (13" 2.53 model in particular). I'm leaning away from Apple Cinema Displays (due to their lack of support for non-Apple computers which I own. Pl. correct me if I'm wrong in doing so).
View 10 Replies View RelatedI've hooked my Macbook Pro 15" to an external Dell monitor, keyboard and mouse and everything seems to be working fine - I can put the laptop to 'sleep', then wake it up via the external keyboard and then use the external monitor as the main monitor with the laptop screen 'asleep'.
All working fine, but only when I'm using the power adapter. If I try and run from just the battery the laptop keeps going back to sleep. It 'wakes', but after a couple of seconds goes back to sleep.
Is there any way to use an external monitor with the XPS 13. Â It would make working with photos on the road much easier.
View 3 Replies View RelatedI'm looking to purchase a external monitor for my Studio 15
What the maximum resolutions that my laptop will support? I was told that it will support 1920x1200. I just want to double check that
When I hooked up an external monitor to my E6400 laptop only narrow range of resolutions were available.
The required resolution was not listed.
Do I need to get some drivers to solve this issue?
Right now my internal screen listed as generic pnp monitor.
I have the WXGA+ monitor
I was wondering if anybody else is having issues with using 2 external monitors with their M6400?
My configuration:
I have a M6400 Covet, FX3700M, 8GB, Vista Ultimate 64, A01 BIOS, updated drivers... connected to an E/Port Plus 210W Port replicator. I have a 24" Dell 2405FPW external monitor connected to display #1 (1920x1200) and a 19" 1908WFP connected to display #2. (1440 x 900). Both are connected via DVI connectors.
My problem:
The secondary monitor never has problems... However, the main monitor (24" @ 1920x1200) goes all crazy. It has red "dots" that appear all over the screen in dark areas. The bottom of the screen sometimes has horizontal bars. I see red and black vertical bars as well. The screen constantly flickers and the image hangs off the edges many times. If I change the resolution to BELOW 1440 x 900 the screen looks fine. Anything over 1440 x 900 goes crazy. (none of this occurs when using the LCD on the laptop itself)
The 24" monitor is fine. I have swapped cables and they do not help. If I plug up my desktop computer to the montior- it is perfect in 1920x1200. If I plug up my old Dell Precision M90 using it's old E/Port docking station- it too works fine in 1920 x 1200. So it's not the monitor.
Dell support doesn't know what the problem is. They say it's probably a driver issue. (I have the latest driver) They say they will contact me in the future if there is ever a solution and they are going to escalate it to their video hardware team.
Is there anybody else out there experiencing the same issues as me?
If you are running dual monitors successfully with the E/Port Plus 210W, what monitors are you using, at what resolution and what connector? (DVI or that new display port thing) If you aren't using the E/Port Plus 210W- what docking station did dell sell you?
I need to get a resolution to this ASAP.
I've attached two photos taken from my digital camera showing the screen issues.
I am about to take delivery of an XPS M1330 with the 128MB NVIDIA GeForce 8400M GS graphics card. When at my desk, I am looking to use the laptop with a Dell 19-inch Widescreen LCD Flat Panel Monitor [url] I am hoping to use the external monitor at the same time as the laptop monitor (for example, Outlook on one screen and Internet Explorer on the other).
- Is this possible? Does the graphics card support multiple monitors / dual view in this way?
The XPS screen resolution is 1280x800 and the resolution of the external monitor is 1440x900.
- Will the fact that the screens have different resolutions cause any problems?
I recently purchased an XPS M1330, with:Intel Core 2 Duo Processor T8300 (2.4GHz/800Mhz FSB/3MB cache)Intel Integrated Graphics Media Accelerator X31004 GB DDR2 SDRAM 667MHz (2 DIMMs)Genuine Windows Vista Home Premium
I'll mostly use it for AutoCAD, SketchUp, etc.
I want to purchase a monitor, but I'm not sure about a few details:What's the difference between buying a laptop with an HDMI entry, versus just buying one with a DVI entry (which seem to be cheaper), and get a HDMI-to-DVI cable?What's WXVGA and all those 5-letter-acronyms
I am not sure if this is a dumb question or not but I was wanting to get an external monitor for my XPS M1330. It has the nVidia graphics card. Is there a limit to the size of monitor I could get.
View 3 Replies View RelatedI have a problem with my dell e1705 laptop. I was trying to set up an external monitor, after installing the drivers that came with the monitor i couldn't get the laptops internal monitor to start back up. I tried restarting with the external monitor unplugged but the laptops screen just glows with no picture. can anyone tell me how to enable my internal monitor? Only the external monitor shows up when i try to switch displays in the nvidia controlpanal.
View 15 Replies View RelatedI just got my new XPS M1330 With 128MB Graphic Card.
Now when i connect to my XPS M1330 with my External Monitor (Dell 24" 2408WFP) Resolution: 1920X1200
I don't see good sharpness in fonts and image. I have set native resolution that is 1920X1200
I also have Inspiron 1720 (256 Mb Graphic Card)
There its show very fine and sharp fonts and pictures.
I use VGA cable in both the systems.
Now when i talk to Dell Teach Department.
They gave me few reasons as below.
My laptop screen is 13.3" and Monitor screen 24" (i know this is silly reason ) (but i argued with him and then he gave me 2nd reason)My XPS M1330 have lower graphic card (128MB Geforce 8400M GS) that is the reason i can't see clear display. To see clear sharp text and images i need batter graphic card (more then 128MB).
so he said he can't help me. It is not problem of XPS M1330.
Does anyone of you using XPS M1330 with 1920X1200 Resolution?
I have a 4820TG and just bought myself a HP ZR24W. When using the Intel graphic card I have no problems but the ATI-card refuses to give me anything higher than 1600x1200. If I force it into displaying all modes it still doesn't give me anything above 1280x1080 (which doesn't work by the way). The native display of the monitor is 1920x1200. I don't have clone-display activated or anything like that, just the one external monitor. The monitor has the latest INF file and the ATI drivers are the latest that Acer have provided.
I can ad that I am connected through the VGA port and that the Mobility Radeon 5650 is supposed to be able to handle resolutions way beyond 1920x1200.