I have an Inspiron 5520 with Win 8 and for the last few days every time the system boots up I get the following message: "checking media (fail)". The message appears twice then the system boots normally. All the programs/apps work fine. The only "media" program I used was Windows Movie Maker and it works just fine.
Today, I was prompted by the HP Support Assistant software that a BIOS update was available, so I had the application download and install the update. When the computer came back up, it is stating the a boot device cannot be found.
I have an HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.1. Laptop was functioning just fine prior to the update, which means I probably shouldn't have allowed the BIOS update.
I recently bought an Acer 7720 with Vista Home Premium, a few days after setting it up I would go to use the computer and find it had turned off. Looking in the event log I see event error 6008 "the previous shutdown was unexpected"
I sent that laptop back for a replacement, the other day laptop #2 arrived and again I am getting the 6008 error. I was watching a youtube vid yesterday and it just shut right off.
When i'm turn on my HP envy 4-1257er after the sudden shutdown on the screen displays the HP logo that says "please wait". After a few seconds appears the "blue screen with a sad smiley" and further reads:
"Recovery. Your PC needs to be repaired. The boot configuration data file is missing some required information. File: BCD. Error code: 00xc0000034. You need to use the recovery tools on your installation media. Is your don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Press ESC for UEFI firmware settings. "
After pressing the ESC button opens a Startup Menu with a choose an actions like: f1 - system information (worked), f2 - system diagnostic (worked), f9 - boot device options (doesn't work) , f10 - BIOS setup (doesn't work), f11 - system recovery (doesn't work). When I click on these buttons (f9, f10, f11) again loaded a blue screen with an error. On the usb-drives with images does not respond in any way.
I have an acer aspire 5610 and am having a problem. Everything was working perfect then randomly one day it went black. When i log in it still has the windows sign and everything but when i am in the desktop it is black there is no start bar or Icons or backround. Basically my GUI is gone. but i can still see my mouse pointer. I found that i can run programs by opening task manager and clicking file and start new task then browsing on what used to be my desktop for the internet icon. this works and everything works as it should. but i get an error message fo most all programs other than internet. i have attached screenshots of my desktop and of the error message that pops up. at this point i dont care about salvaging the stuff on my comp just want to reset it back to factory defaults. I have tried recoverry CDs that were made and it doesnt recognize them, i cant get to eRecovery due to the error message
My Inspiron 15z was just repaired today (it got a new motherboard due to a different problem that is now fixed). After the first power on with the new motherboard, I received an error message that said, "The exception unknown software exception (0xe0434352) occurred in the application at location 0x76b74b32." I have not seen this message again (I've since powered down and rebooted 3 times), but I'm still unsure as to whether this should be a message I should be concerned about and look further into.
how to troubleshoot the Hard Disk (3F0) error message.
3F0 can be caused by 3 things
1. Bad hard drive or partition structure, erase the entire hard drive then use HP recovery discs to attempt reinstall of the OS and all partitions.
2. Bad hard drive data cable that connects it to the motherboard, replace the cable
3. Bad sata controller on the motherboard replaces the motherboard or laptop.
Now, the first step, is to test the Hard Drive out in the BIOS if you can get into it.
You will need to boot up the notebook and press F10. If you can get into the BIOS you will need to run the self-test. Here is a document showing you how to run the test. If you can't get into the BIOS I would suggest removing the HDD and then try getting into the BIOS again. Once you remove the HDD boot the notebook up again and press F10. If you can get into the BIOS, then the HDD is bad.
Here is a video showing you how to remove the HDD:
When I boot my Inspiron n5720 laptop, an error box pops up that says "can't find plugins". The only option is to click "Okay" and the message goes away. It is a system message because there is a 'dell' icon on the toolbar when it's showing. I have checked the registry for errors, removed unneeded software, run anti virus and anti malware programs and the message still appears every time I start the computer. What could cause this?
Every time I start up my Extensa 4420, I get the following error message window:
"The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter. Please update your ATI graphics driver, or enable your adapter using the Displays Manager."
Why is this happening? If I go into the device manager, it says that the graphics adapter is working. If I tell it to check for updated drivers it says that the driver I have installed is the most current one. Everything seems to work fine on the computer. How can I stop the message from popping up every time?
My Inspiron 15z was just repaired today (it got a new motherboard due to a different problem that is now fixed). But now, whenever I start up my laptop, I get an error message from Intel Rapid Start Technology Manager that says "Your system does not appear to have Intel Rapid Start Technology enabled." I have never gotten this error message before. It is only now after my motherboard has been replaced. I don't understand what Intel Rapid Start Technology is and if I should have it enabled, and if so how to enable it.
I have a DELL XPS 15 L521X, (Mid 2012), I have Windows 8 on my machine, Suddenly when I restart my PC a black screen is visible without any error, but system continue beeping. Then I press Power button and shutdown it, after some time when I start it again, its start working normally.
Once system starts its start working without showing any hardware or software problem whenever I shutdown or restart, sometime its start working sometime its continue beeping without showing any error.
I didn't realize that my motherboard was bad from the factory. From the very first day I was unable to do a full factory restore. I would always have to send it in to HP. I was sent a motherboard and after installing it I was able to do a full factory restore. It was amazing... However, I now have this error message on bootup. What exactly does this mean?
When I go into the BIOS, All the information about the system is xxxxxxx. When I go into HP support assistance. The product name, serial number, and product number is yyyyyyyy. I know this is wrong, why?
My HP TouchSmart tm2 with the product number of VL618AV won't turn on past the logo screen. I really don't understand why this is happening because it is just over a year old. I have Windows 7 and there are no error messages on the computer.
"warning The battery cannot be identified. This system will be unable to charge this battery press any key to continue"
I did search the Internet and this forum but have not find any workable solution. My latop came with BIOS version 2.1.0 A07, tried to refresh the BIOS with the same version, and higher versions all the way to version A15 but no luck.
The battery does hold charge and the message disappear if I remove the battery and bootup with the AC adapter alone.
I've had my netbook for a few years and this error message has been appearing bottom right since I got it. Both USB ports have always worked fine. Device manager it shows a USB controller as not recognised by Windows. f I try to 'update' it says wndows doesn't recognise it. I can disable it but of course it renistalls on reboot and the message starts again.
I ignored it as it didn't do any harm. Recently I did a factory reset expecting this to do the trick but it didn't. I also updated the bios to v2034 I think but there's not much content to it so I've not got any USB options there.
I'm wondering if there are chipset drivers I need to get, though the Acer site doesn't offer anyting new there.
My integrated webcam on my lenovo yoga ideapad seems to be malfuncitoning. When I try to open any camera using applications the screen is black with no error message or viewable problems. When I check in device manager the camera says all the drivers are updated and it is in working condition.
Things I've tried/ Things others have suggested and did not work:
fn+esc Trying it in other apps besides camera Check device manager for driver issues Update Drivers Disable Camera
1) KM632 - My new Dell Inspiron 20 3043 with Dell USB wireless keyboard and mouse Bundle KM632 - The keyboard does not recover from the sleep button on the keyboard by pressing a key. The PC has to be turned back on by the power button.
2) Diagnosis not working - In the Product Support page the Diagnosis does not work - it has an error message, “PC-Doctor Powered Application is currently running. This is not used when gathering system information or diagnostic test results through the Diagnosis Control.”