Turn on my g6 last night and it turned on but the screen does not the fan turns on and the lights are normal I tried taking the battery. Out and the adaptor and did the 30 second thing that did not work I tried it without the battery and still nothing at one point it sounded like the operating system turned on but the screen did not (windows 7). I've lots of work to be doing on my laptop
View 2 RepliesHP pavilion 14 with touchscreen on windows 8 every time i press the shutdown button screen go off but the power button keep lighting and the fan too i waited around 5 hour nothing happen. I reformatted and i got the same result updated to 8.1 and I tried the latest driver on the hp site same result i thought it was a hardware problem so i tried installing win 7 it worked perfect.
Note that i had a lot of problem installing ati driver for windows 8.1 from the HP site it do not recognize the graphic card so i installed the ati moblity driver 14.4 . and i got the latest bios update.
for some reason the on screen display meter for my volume when pressing on the keyboard suddenly disappeared, I would like to get this back. I found this thread in the forum URL.... which another was having the same problem I'm having. The only difference is that I'm using HP Pavilion G7 with Windows 7.
View 1 Replies View Relatedi am using dell inspiron N5040 model . it is not turned on . i am diagnose power and without battery power ON checkup it is not working .
View 3 Replies View RelatedHp Pavillion 15 startsup with black screen, after 2 min login screen pop-up and disappears, laptop is 10 months Old, mot daily used
View 9 Replies View RelatedI started having problems with my laptop weeks ago. First, there were problems with the screen. Sometimes when I turned the computer on, the screen didn't displayed, so I had to try several times for it to come. Then, even when the image appeared, if I moved the laptop a little bit or it was on for a long time, color stripes would appear on the screen.
After that, one day i tried to turn on the computer and a message appeared that said that the operating system could not be found. By then I asked someone at my school and they told me there could be a problem with the hard drive. So I took it with them, and they told me it was so damaged that there was no way to recover the information I had, so I lost all of it. They formatted the drive because in that way there was a possibility I could save the drive even though the information was gone. So the next step was to install Windows XP again.
So I started doing that, but when I turned on the computer, now there wasn't even a message that said that the operating system could not be found. Now there's only this white line flashing on the top of the screen. What can I do now? For what I've read, there can be a problem with the master boot record. Considering that there's a huge chance that my hard drive is really useless now, I was thinking about buying a new one, but I fear that even then I'll still have problems with that boot record.
when my xps m1530 is turned ON nothing displayed on display some times. i have to turn off and turn on a number of times to get it right. it happens often now. what is the reason??GPU issue?? LCD issue??
View 3 Replies View RelatedI m having an HP pavilion G62016-TX with Windows7 ultimate with 64 bit version,Purchased on Nov'2012.
Recently my PC crashed and when it was reinstalled with all drivers from HP FTP i am having below problems.
When i am adjusting my brightness , it is getting adjusted but the adjusting bar usually shown in the screen is missing.
When i am adjusting my sound , it is getting adjusted but the adjusting bar usually shown in the screen is missing.
I was using my HP Pavilion g7 the other day, while gaming and the screen went black for no appairent reason. i haven't down loaded anything recently and i run virus software.
We went to the HP support web site and went through several diagnotics. When the laptop is rebooted the screen on the laptop will flash images of my desk top but once the machine boots up the screen remains blank. you can see the glow from around the edges but that is it. I have another monitor plugged in currently and the system is functioning propertly except for this. We have also done the following, hard reset,Test for memory modual problems, test the hard drive. I was also trying to update the video drivers but the system tells me the drivers are working properly.
I have an hp pavilion dv6. It was purchased at the end of 2010. My computer teens to get hot a little quicker than normal. It had overheated a couple times, but not recently.I recently went on a road trip and when I got back my computer screen won't turn on. While I was away, I took the bottom plastic screen off and put it back on (one of the sides had come loose and a tab was sticking out). I also tightened all the screws on the main cover on the bottom because some had come loose.When I got home and tried to turn my laptop on, the screen wouldn't turn on. I can hear the fan turn on. The light indicating the wifi was on, but showing that it was off- and it was on when I last used my computer. Also, the capslock light is blinking. I don't hear any sound from the speakers or anything like that. I tried hooking it up to a projector but never got a signal. I tried unplugging it and removing the battery and holding the power button for 30 seconds but nothing changed when I tried turning it back on.
View 3 Replies View RelatedWhen I log on my hp sleekbook 14 pavilion laptop the screen goes blank. But I can see the cursor is moving. I can hear the windows sound. I can work on safe mode. Programs running but can't see anything. OS is win 7
View 1 Replies View RelatedMonitor in black display but with the power turned ON. Also, I cant do anything for any backup solutions cause of the reason above stated.
View 4 Replies View RelatedI've checked my control panel settings and then the advanced settings (for notification icons--which doesn't apply to this problem).
What ever I set, I'm working at my computer and screen always goes to sleep 1 minute after if I don't touch the keyboard.
What am I not getting. I need at least 5 minutes or so before it should go to sleep. My computer at the office only goes to sleep after I make it.
I have had my Hp dv7 notebook for a few months now and have had no problems. But all of a sudden, I turn on the computer and see nothng but a blank, black screen. I do not know if I changed the display settings or what, but I cannot see anything. I know the computer is functioning because the fan turns on and the keyboard lights work. When I connected my laptop to an external monitor, I was able to see that my computer was on and fully functional. In fact, I am using it right now on an external monitor to type this message.
View 9 Replies View RelatedMy Pavilion dv9000 screen is black. I know the graphics card is faulty, what are my options to get this replaced. If I purchase and replace the motherboard will I get this same problem later down the road.
View 1 Replies View Relatedmy laptop screen backlight goes off, when I rest my hand on the left side of the touchpad. The darkening of the screen can be also reproduced when a small pressure is applied on the case just above the ethernet port or above the headphones port.
When the screen goes dark, I can see that everything is running normal, if I shine on it with a lamp or strong light. The resulting effect seems to be the same as if I would have lowered the brightness to minimum.
When I don't press the area described above, the screen is just fine. I am sure this problem is not software or OS related. I googled it a lot and my guess is lose connection on the inverter?
One last thing - idk if related - sometimes, when I boot up the laptop, the backlight is turned off and I have to adjust it by pressing F3.
I recently purchased an HP Pavillion X2 2in1 laptop and want to connect it to my TV. The laptop was recentluy upgraded to windows 8.1. When I connect using an HDMI cable, the TV recognises that the HDMI is connected, but the laptop screen will not transmit onto the tv screen. When I hit f4 to toggle the display, it says 'Your PC cannot project to another screen. Try reinstalling the driver or using another video card.'
When I go into control panel as recommended on other queries, the adjust resolution screen does not give me any other options than the Basic PnP display. It's like my laptop cannot detect my tv. It is not in my computer, devices or anything. I didn't attempt connecting it to my tv when it just had windows 8 on it ...
When friends send videos I cannot always watch them as the screen turns green. The sound continues to play but there are no visuals.
View 1 Replies View RelatedMy hp pavilion x360 was working fine today inthe morning when I turned it on it all seemed normal I put in the log in password and once I hit enter the screen went black bu the cursor was still showing.
View 1 Replies View Relatedthe contrast on my screen somehow got messed up and I can't find out how to adjust it.
View 9 Replies View RelatedBlank display, connected to tv via hdmi and to monitor via vga still blank. Tried with single ram in both slots alternatively still blank. Reconnected hdd still the same. Consulted with a technician, who tells that it is possibly a IC got corrupted (maybe of the vga or graphic). Is it repairable without replacing motherboard. If so then, where do I find the IC. What is the IC model number and what else do I need to do?
Using: HP Pavilion dv6-3050tx Product number: XB772PA#ACJ
My screen gets black when I start windows 7 on my Hp Paviliom Dm1 Notebook. Also I connected my pc to an external monitor through VGA cable and then I can see the windows operating system in the external monitor . I did a start-up test and then I got these results:
Memory Test: Passed
Smart check: Passed
Short dst: Passed
Optimized DST: Software Error
Battery test: Primary Passed Secondary - NOT Installed
PCI Device check: Passed.-----------------------------------------------------------------------
Start-up Test: Passed
I have HP Pavilion G6-1305sx notebook with screen brightness control issue. The f2 and f3 keys (for brightness control) do not work . I've tried through control panel, but still cannot.The light on the screen is too bright for my eyes.
View 2 Replies View Related>HP Pavilion g7 series
how to change the screen resolution but, it won't stay at recommended resolution when I restart my laptop, it keeps going back too the smallest resolution. I have to go and change the resolution every time I turn it back on.
When I switch the laptop on, I can hear the fan, the wifi and caps lights come on but the display remains blank. This happened about two weeks ago so I did a hard reset and that worked. When my laptop, which is a pavilion g6-1112sa model that I've only had for two tears went into sleep mode yesterday I tried to awaken it but the screen just remained blank. I've tried a hard reset again today but it doesn't work at all.
View 4 Replies View RelatedI have an hp Pavilion g7-1150us Notebook that is approximately 3 yrs old. I turned it on the other day to find that the screen is all pink and green with lines etc... Is there an independent video/graphics card that can be replaced? I would like to be somewhat knowledgeable when taking it in to be repaired.
View 3 Replies View RelatedI have a Pavilion dv6-6173cl laptop. It's been working fine until recently, when I left it on overnight to finish downloading a huge file. When I tried to adjust the brightness the next morning, I couldn't (though it was still at full brightness like I always keep it). So I thought, "why not reboot it?" I rebooted and now the display is the dimmest it can get with no way of adjusting the brightness using the brightness keys, control panel, or otherwise.
This has happened before. When it did, I did a factory reset on it and it fixed the problem. However, although there is no absolutely critical data on there and I can always make a backup, I prefer to not have to go through all that if it's avoidable. I have an external display that HP asked me to connect it to to see if it was a hardware or software issue. The external display was at full brightness, so when they asked me to ship it in I did a factory reset and that solved the problem. And now it's back.
The display of my hp pavilion 15 N 043ee laptop is extremely dim. I'm unable to see anything on the screen unless I shine a flashlight onto it, and even then I can barely see. When I connect it to an external monitor it works fine. I restarted it and hit f8 to access the bios screen and it's also dim there as well. My laptop is only a few months old ....
View 1 Replies View RelatedI own the HP PAVILION 15-E009TU notebook. It is just 10 months old. I had some grey lines in the LCD screen few days ago and called hp for warranty replacement. a technician came and replaced the LCD screen with a new one.
However the new screen has a sort of Blue tint the entire screen. I have tried different colour setting which may fix it in windows but the blue tint is still there when windows is booting up and in the BIOS. I mean what? Did I just get a faulty/refurbished screen again? Also the screen doesn't look HD like my original screen. Is there anyway to verify that I got the exact model screen I originally had? and what about the blue tint? should i try warranty again?
I just purchased a refurbished HP Pavilion. I cannot figure out how to turn off the auto brightness, which is an extremely irritating feature, which to me seems to have no purpose. I have turned it off under advanced power settings, nothing. I have looked in General PC settings but nothing(Windows 8.1) I have done all I can find to do.
View 3 Replies View Related