Can any E440 and E540 owners confirm whether these laptops feature the ability to remap the Fn and Ctrl keys? I understand a BIOS setting provides this function on previous E-series models, but haven't found information specific to the newer models that confirms this setting is present.
View 2 RepliesI bought a lenovo e440 specs i5-4300M(2.6GHz),4GB RAM,500GB 5400rpm HD,14in 1366x768 LCD,1GB NVIDIA N15V-GM, CDRW/DVDRW,802.11bgn wireless, 1Gb Ethernet,UltraNav, Camera,6c Li-Ion, running windows 8.1 64 bit all drivers are installed and working properly .
My problem is when i am using avidemux or handbrake or nero recode 2015 to convert video my cpu usage is always at 100%.its not using the nvidia cuda capabilities to take load off the cpu .its like the switchable graphic is always stuck on intel 4600 .
I tried updating the graphic cards and latest bios update .tried putting the power at high performance. Opened nvidia settings and added programs to the list to be used with nvidia graphic processor . In bios i have selected the nvidia graphic card ... still the same cpu is at 100% during video converting .
I have another question regarding the E440 specifically. The technical spec sheet says optional fingerprint reader, but I don't get that option on any of the customizations for this laptop. Is it really no longer an option?
View 5 Replies View RelatedMy Lenovo E440 screen flickers when I plug or unplug the AC power charger. I think this happened after I installed all the drivers. This doesn't occuer when the windows was still 'fresh-installed'.
I read on other thread that this also happened on other machines and I think the cause is the same, the refresh rate change from 60Hz to 50Hz when I plug the AC power and then it goes back to 60Hz when I unplug the AC power. So I plug the AC power then change both refresh rate to 60Hz. It went fine when I unplug the charger, but when I plug the charger again the refresh rate for while plugged in change to 50Hz again no matter how I try (so it flickers again when I plug the charger again).
Also, I am using Windows 8.1 Enterprise Evaluation and I've installed the latest Windows Updates, Lenovo System Updates, and Nvidia driver update.
My question is:
1. Is this software error or what? If it is software error then shouldn't this occur on all user?
2. What is the difference between the display refresh rate? Which one should I use (I though higher refresh rate is better)? Why does the refresh rate change when I plug/unplug the charger? If I remember correctly AC power source is 50Hz, does it related to this problem?
I have a newish (4/2014) Thinkpad E440 with a 500 GB HD. All of a sudden, the hard drive has filled up. I cannot account for all of the space. Here's what the system says:
35.2 GB available of 452 GBApps: 31.4 MBPictures: 76.1 GBVideos: 137 MBMusic: 20.9 GBDocuments: 8.14 GBDownloads: 0 bytesRecycle bin: 0 bytes
So you can see this is a wee bit over 135 GB. Where in the world is the rest of the space? Here's what I've looked at / done so far:
"System Protection" is turned on and is currently using 10.48 GB. I have the max set at 3% (13.59 GB). There are currently 3 saved restore points. --> EDIT now it says it's using 5.97 GB and there are only two restore points now.I've run "Disk Cleanup" and it says I could regain 33.6 MB. Whoo-whooooo!The disk was 1% fragmented so I ran defrag.I ran the error checking tool on the drive and it said there were no errors on the drive. Now, after finishing the defrag, I've lost more space "as we speak"20.4 GB available of 452 GBApps: 31.4 MBPictures: 76.1 GBVideos: 137 MBMusic: 20.9 GBDocuments: 8.14 GBDownloads: 0 bytesRecycle bin: 0 bytes
FYI: When I go to Lenovo Solution Center and click on Support and then go to Configuration History, the calender there shows the yellow triangle with the exclamation point in it for "System Events" on every single day that I use the laptop. When I click on one of those days, it shows multiple "Application Errors". This has been going on since the day I got it. I don't know if there is a log somewhere that is spiraling out of control.
I forgot to say I use Kaspersky Pure 3.0 for virus software and I have it performing a Full Scan, a Vulnerability scan and a Critical Areas scan every day. I also scanned the drive with Malware Bytes and it did not find any malware. Also I am running Win 8.1 - it came that way from Lenovo.
I just took delivery of a new E440. I've noticed that when I type a " character, on the first key press nothing appears on the screen. If I type another " then two appear together.
Is this a 'feature' - a way of turning it off so I get just what I type, or Does this indicate I have a keyboard problem?
I did have 10 updates that failed to install for some reason. The error code for all of these is the same (80240054) but I don't get any results on the MS site for that code.
Article 3004394 December 2014 update for Windows Root Certificate Program in Windows
Article 3012199 December 2014 servicing stack update for Windows 8.1 and Windows Server 2012 R2
Article 3013816 December 2014 MDM client update in Windows
Article 2994290 Update to Language Interface Packs for Windows 8.1 and Windows RT 8.1
Article 3008925 Microsoft security advisory: Update for vulnerabilities in Adobe Flash Player in Internet Explorer: December 9, 2014
Article 2989930 "Not Connected" status for a paired Surface Pen in Bluetooth settings on Surface Pro 3
Article 3008923 MS14-080: Cumulative security update for Internet Explorer: December 9, 2014
Article 3013769 December 2014 update rollup for Windows RT 8.1, Windows 8.1, and Windows Server 2012 R2
Article 3013126 MS14-085: Vulnerability in Microsoft graphics component could allow information disclosure: December 9, 2014
Article 3013410 December 2014 cumulative time zone update for Windows operating systems
I don't use IE and it's obviously not a Surface Pro... Why Bluetooth would go away?? My computer also ended up in Airplane Mode for some reason, but I turned that off. On the Network Window under Wireless Devices, Bluetooth shows as Off and is grayed out...
I have an E540 and today I spilled some liquid on the trackpad and now my cursor is moving around and clicking randomly. I use a mouse so I don't need the trackpad.
I've read online how to disable the trackpad but I don't have any of those options. Like disabling it in BIOS or in the driver(Control Panel -> Mouse) - I just have uninstall. If I uninstall windows 8.1 will just automatically reinstall it after reboot.
How can I disable the trackpad?
I have purchased E540 and I have purchased Norton Internet security but the system does not load the installation when I insert the disc. I have tried the run command as well as other options like choosing the file from the disk in the windows explorer but still my system can not load the setup!
View 1 Replies View RelatedI just purchased the E540. Running Win 7.1. I have 2 WD 3.0 Passport drives plugged into a USB 3.0 hub. The 3.0 hub has the correct cable for 3.0. They are not being recognized as 3.0 devices (I get a message). I updated the USB 3.0 driver on lenovo's site and BIOS is set to auto.recognize. I have also tried the 3.0 option in the BIOS but that didn't do anything. I also tried using the drives without the hub in one of the 3.0 USB slots but that didn't do anything either.
I have checked the forum but what I found was possibly purchasing a 3.0 cable (not necessary - my cable is 3.0 compliant) but that was for a Wn 8 system or updating 3.0 device driver (done). So much for plug and play.
The fan in my e540 does not stop once it has started spinning. This is completely independent of system temperature. Even though the temperature of the board and the cpu is below 40*C the fan won't stop.
The fan does not always spin, though. If I wake up the system from sleep or power it on, the fan does not spin and will not start spinning until a certain temperature threshold is reached. This part of fan control works correctly.
Interesting procedure: I work until the system gets hot and the fan kicks off. I want until the system is cooled down below 40*C (checked with speccy software, the air stream leaving the notebook is cold). The fan is still spinning at this point and will probably spin forever. I suspend the laptop (no complete power off required). I immediately "wake up" the laptop (system temperature did not change, no time to cool down). The fan is off again and will not start spinning until the temperature threshold is reached.
I encountered this problem today when i tried to scroll up a website and it simple didn't scrolled up so I tested it in some other programs to make sure it isnt just the scrolling. Then I booted into bios and the key works there fine and when windows started up the key was working for brief moment and then stopped working.
That points toward some program that might be doing it but I don't have a clue which one.
Win 8.1
I have recently purchased a Lenovo ThinkPad Edge E540, with Windows 7 installed. I'm trying to use the integrated camera with Skype, but I can record no picture. When I try to install the Integrated Camera Driver from Lenovo Support, [UR], the setup always fails with Engrish error messages.
View 2 Replies View RelatedI was wondering what the correct resolutions are of the 3 available screens on the customizing page of the Lenovo E540. I can't find it anywhere and I really want them for comparing.
View 1 Replies View RelatedI have bought my new E540 some days ago. My keyboard is Norwegian so there is a key called AltGr available which is used as a combinational key similar to shift. when I just press the key related to backslash ( it's '+') it works fine but when I want to type backslash (it's AltGr and '+' together) it does not work.
View 2 Replies View RelatedI'm thinking of buying a Thinkpad E540 with a discrete nvidia gpu. I am planning to install linux on it and I don't really need optimus for it (nor is it well supported) but I'd like to occasionally be able to use it on windows.
I'd like to know if it's possible to completely turn off the nvidia gpu from the BIOS so it works only with the integrated intel one or should I buy one with intel gpu only.
I have read that the lenovo changed the dual gpu implementation on the latest generation thinkpads.
Dolby Advanced Audio v2 issue .....
I added a second drive (SSD) successfully to the E540, everything works and is set up properly. I still have the original HDD in place and got Windows 8.1 (x64) installed on both drives. However, I cannot run Dolby Advanced Audio v2 when booting from the (fresh) Windows installation on the SSD. Right after booting or trying to start the application there is a Windows error message telling me that the Dolby-driver cannot be run and I should reinstall the application if the error continues to exist.
When booting from the original HDD there is no problem with Dolby Advanced Audio v2, the application just works fine. Whenever booting from SSD the error message comes up.
I know that this is a known issue and I've read all the information that is out there on the internet. I tried uninstalling and reinstalling from the DRIVERS folder on C: multiple times, installed everything in different orders and tried almost every combination of using the SETUP in AUDIO, the SETUP in DOLBY, the UIUa64 and so on. I can't install Dolby Advanced Audio v2 on the new SSD properly. The installation finishes and Dolby Advanced Audio v2 is shown in the list of installed programs, but immediately after finishing the installation the error message also occurs.
(I exactly followed the reported solutions for other systems, but none of them worked for me. In which order I have to run the driver setup(s) for my E540 if you think this is a possible error source.) I really do not know what could cause the error message while the (seemingly) exact installation still works while booting from the original HDD?
(I am not referring to Dolby Digital Plus but Advanced Audio v2! The Dolby Digital Plus user interface is accessible on SSD. The sound quality varies tremendously between the two Windows installations on HDD and SSD and the loss of sound quality is unacceptable for me.)
I uninstalled and reinstalled (automatically by Windows 8.1) the mic and it's no change. I try to chat over Skype but people barely understand what I am saying. I tested it with other apps apart from Skype and it's the same issue.
Here's a recording: [URL] .....
How I can troubleshoot this?
I would like to know the interface type of the optical drive sata port of a ThinkPad E540. It's a sata I, sata II or sata III?
View 3 Replies View RelatedToday I received my brand-new E540 from Amazon. Upon inserting the battery and starting the laptop for the very first time, I was greeted by the following error message:
The battery installed is not supported by this system and will not charge.
Please replace the battery with the correct Lenovo battery for this system.
Press the ESC key to continue.
The message has only appeared once and hasn't been shown on subsequent reboots.
I proceeded to install Windows 7 which worked fine. Under Windows the battery symbol in the taskbar would say "66%. Plugged in. Not charging". I then shutdown the system and re-inserted the battery. Since then the battery appears to be charging normally and when I inspect the battery symbol in Windows it says something like "89% charged. Plugged in. Charging."
Seeing how this is a brand-new laptop, do you think the battery is broken and I should return the laptop, or should I keep it since it seems to be working normally now.
In Skype when trying to make a call, the program crashes, I googled the issue and it seems others have had similar problems and it was fixed by updating their Intel Graphics driver.
"Intel® HD Graphics Control Panel" program also won't open, it crashes instantly.
"ThinkPad Video Features" driver fails at installation ....
I have the latest driver to the Intel Graphics, which I got from lenovo support....
OS is Win 8.1 64 bit
I have recently bought ThinkPad E540 with OneLink Pro Dock, in which I have connected my LG Flatron IPS236 external display. LG's max resolution is Full HD 1920x1080, but for some reason my external display's max resolution is only 1280x1024. The display is attached to the OneLink Pro Dock's DVI port. I have both updated the graphic card's drivers and LG monitor's drivers and booted the system. I have also tried using both 75 hertz and 60 hertz refresh rates.
View 2 Replies View RelatedCorresponding shortcut for Pause, Break, SysRq and Scroll Lock on E540 model because they are not displayed on the keyboard, just like every other lenovo laptop...
View 2 Replies View RelatedI've recently purchases a Lenovo ThinkPad Edge 540 and it worked just fine untill earlyer today.While i was browsing the internet, some how my touchpad developed a problem.It only registeres right click where ever i click.I've deleted the drivers, even tho they were the knewest ones, downloaded a fresh .exe and installed it after the reset and what not and it still has the same problem.
If i turn off the touchpad in the ultranav software and enable only trackapad, the buttons work like they should, the large area in the touchpad registeres as the left click and the small area in the top right is registered as the right click. Tho i can't use the touchpad for navigation.So clicking doesn't works, well neither does tapping. I can doubletap normaly, but i cannot tap and drag such as selecting a block of text.
Again, i've already tried a fresh install of ultranav drivers and it didn't work. The problem manifested itself during normal browsing, nothing was installed nor changed hardware vise. It litteraly changed in a second.how to solve it since the driver reinstall didn't work.
I have a T440, and I've set in BIOS to swap places for fn and ctrl. This works great until the machine goes to sleep or similar. After awakening the machine the keys are back to their original setting, with fn being fn, and ctrl being ctrl.
I havent explored this in detail but just found the machine sporadically losing the setting, but never while I'm working on it. So either from sleep or from locked screen.
I always use FnLk as well and that is also lost when this happens. I have to restart to get back the setting for fn-ctrl swap, but FnLk i can just enable,
I run Windows 8.1 on my T440.
I updated the BIOS of my TP T410 (2522), German keyboard, to 1.45. After the update both CTRL keys do not work any more. The same for AltGr. When I activate the FN CTRL switch in BIOS the FN key - as supposed - works like the CTRL key. But when I deactivate it again the FN gets back to its proper function and CTRL does not work.
When I connect an external keyboard via USB it works perfectly. How to get the CRTL key working again?
Before the end of 2013 I bought an Ideapad U530 Touch for school and it's been working fine up until a few days ago when the backlight for the left most CTRL key stopped working and shut off completely. Every other key on the board is fine, except for this one. Is there any easy to fix to this problem, or do I need to send the entire computer back?
View 2 Replies View RelatedI own an Edge 15, 64 bit processor. It came with 2gb RAM. I recently purchased and installed two 4 gb cards for a total of 8gb RAM. I updated my BIOS. Under "Computer>Properties" it is showing only 4 gb Install RAM. Why is it not reading or the system not using the additional 4 gb of RAM on the second card?
View 3 Replies View RelatedI have an y510p. the 1TB 5400 HDD isn't cutting it for me. I have a 256 GB SSD that I would like to swap in there. What are my options?
One Key Recovery tells me my image will be about 105 GB.
Question 1: Can I create the image on an External USB, then swap out the HDD with the SSD, then recover from the external?
Question 2: Is it possible to re-set up the one key recover partition on the SSD after all is said and done? in case in the future, I'd like to get a larger SSD.
I just purchased a G505s laptop, and I now realize that the function keys (F1-F12) operate as Lenovo hotkeys by default, and I need to press th "Fn" key along with them in order to get them to function in their original mode. This is not acceptable for my normal usage. I know with other Lenovo laptops, there is a BIOS setting that allows the user to either "disable" hotkey mode, or set them to "legacy" mode, but in the current BIOS/UEFI for the G505s there is no option to do so.
View 9 Replies View Related