Lenovo B / G Series :: G40-70 Bricked By BIOS Update
Jan 6, 2015
My Lenovo G40-70 that I've just bought 6 months ago where I accidently bricked the laptop after BIOS update. It seems during the BIOS updating process it when well but after 2nd reboot there's some message on the screen that the BIOS failed to update factory setting and it freeze on the message for quiet sometimes. After a long wait I decided to long press Start button for hard reboot. Then the scary part comes in where it seems the laptop can't longer shows the Lenovo logo & cannot even boot to Windows, just black screen.
I would like to tried myself first before ending up with warranty claim since I'm worried I've brick the warranty due to wrong BIOS update procedure....
View 3 Replies
ADVERTISEMENT
Jan 28, 2014
I have bought used x131e 3367. After successful update of drivers (Win8) using System update 5 I decided to update also offered new bios. After flash and restart I can hear only beeps 1-3-3-1. I have tried to find solution to recover BIOS but no luck. Solution with wincrisis does not work for me. I have tried to use e_bcpvpw.exe with $0AG9000.FL1 file but no luck - Source file format not acceptable - missing header!
View 9 Replies
View Related
Jan 12, 2009
Simply put I went to update the bios on my notebook as I have previously without incident. Well this time the update downloaded, installed and powered down Windows Vista 64bit SP1. After that nothing! The power lights come on but that is it. No HP Screen, No MSFT Screen no nothing. I honestly think this is a bios update caused by HP's own update.
This is the update I installed: [URL] ...
View 9 Replies
View Related
Aug 14, 2014
Just purchased a G50-30 with win 7 x64. Decided to update the BIOS A7CN40WWW_64 from Lenovo website. The notebook version was A7CN23WW.
Upon reboot, after successful BIOS update, Win 7 booted with errors of Repair option or Normal boot up. Even re-installation of Win 7 will yield BSOD - ACPI non compliant.
Have changed BIOS settings defaults from UEFI to Legacy, it still does not work. This BIOS version is not stable. Can i request for the earlier version of BIOS ?
View 1 Replies
View Related
Sep 28, 2014
I just bought Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
View 2 Replies
View Related
Feb 18, 2014
I really don't know how to update the bios for the 505s. Where can i download the new bios update and also what are the steps that I have to take? Will the program just update everything once you press yes or will you need to go in to the bios in the start up or what?
View 5 Replies
View Related
Jul 14, 2013
I downloaded the BIOS package from the link: [URL] ..... but I don't know how to update the BIOS. I tried running the file Winflash_Yx00s.bat as Admin but nothing happens. Do I need to flash it using a USB stick and if so then how to do it.
View 2 Replies
View Related
Jul 6, 2014
I have a small issue with my Lenovo G580 (20150). I have Windows 8.1 and i have noticed that my 4GB of RAM DDR3 run at 800mhz. I have searched for everything, even swapped the RAM but there is no change in the frequency, it simply runs on 800mhz. I have tried to update the BIOS from 5ECN39WW (v 3.05) to 5ECN96WW, but whenever i try to do that it comes back with the error message "DC detect error!".
View 3 Replies
View Related
Jul 12, 2014
I have a Lenovo Z500 notebook and I would like to know if is it safe to run 1.21 BIOS update for Windows 8 on Windows 8.1 64bit? I have a problem with Fn keys and in my current BIOS (1.10) there are no option for it.
View 3 Replies
View Related
May 3, 2010
I am unable to update the BIOS on the Thinkpad listed below.I have tried to run Boot CD version of the update program (using CD player in dock) and it reports the error:"The system program file is not correct for this system"..The Windows based BIOS update program reports the error (in or out of dock):
"The process does not recognize this system. The process has been cancelled"..The Lenovo support page lists the new BIOS as being appropriate for this model. The BIOS reports the correct model and serial number.I desire to update the BIOS only as part of a software reload / refresh of the laptop. No actual problem with current BIOS to my knowledge.
Thinkpad X220
Model 4287 2VU
Current BIOS 1.11 (8DET41WW) 2011-03-28
Attempting to apply BIOS 1.37.1.24 (2013-02-06)
View 7 Replies
View Related
Jun 27, 2014
my laptop is z500 and i've installed the windows 8.1 enterprise x64 but i don't have bios update and windows 8.1 is nothing have a bios setup or bios update,.Where can I find the bios update for z500 windows 8.1 x64 ??
View 9 Replies
View Related
Mar 3, 2013
Lenovo IdeaPad U310 with i5-3317U CPU and Bios ver 65CN89WW (09/04/2012)
I downloaded BIOS Update file (65cn21ww.exe) from ([URL]...), but after start I got a message "ERROR 233 - Only secured capsule is allowed on a SecureFlash system! Status = 1."
What am I doing wrong? How to install the update BIOS?
View 6 Replies
View Related
Feb 13, 2012
I'm looking for a Lenovo B575 bios update/flash utility since my BIOS has gone bad. I cannot change/save changes and cannot restore to defaults.
I cannot find bios updtae on lenovo site (not on drivers for B575 and not under the drivers matrix). I've even tried via "Phoenix" as it's their Bios, no good. And even via a third side component (biosagent plus) that should have Phoenix bios, still no good.
View 9 Replies
View Related
Jun 10, 2013
I have recently downloaded a BIOS update for the G580 - version 20150, and ever since that I am locked out of the BIOS setup menu. It asks for a password, however I haven't set up one, and such, I am unable to change any of the settings.
Changing the values there would be important, because the settings seem to be reset to a default state, for example, I am unable to start any 64bit virtual machines because hardware virtualization is disabled. I was running Qubes OS too, but I am also unable to boot off legacy (MBR partitioned) devices, which I do occasionally to test some new Linux distro when it comes out.
Apropos Linux: as soon as the system starts booting, the screen goes completely blank, and I have to keep pressing brightness-up to see if the system had started. Brightness controls also seem to behave strange under MS Windows too: on the lowest level instead of dimming (what it did before), the screen goes completely blank. The only good thing in this update is that bluetooth now seems to work more reliable under Linux.
Is there a way to remove the password lock from the BIOS and/or revert to the previous version to avoid the screen blanking issue? Would reverting the update also remove the password? If the password can't be removed, is there a safe way to change the settings from a running OS?
View 9 Replies
View Related
Aug 23, 2014
I recently upgraded my ThinkPad W530 laptop BIOS from version 1.11 (which it shipped with) to the latest, version 2.59.
After doing so, my two 16 GB DIMMS are not only showing up as 8 GB each, thereby cutting my usable memory in half from 32 GB to 16 GB.
I ran through all the normal hardware checks to ensure that one of the DIMMS wasn't bad. I tried each DIMM separately, tried in different slots, etc. They both show up just fine and even pass the memory quick test in the BIOS. Only, they are showing up as 8 GB DIMMs.
Is there a feature in the latest BIOS that would somehow limit this? It was working fine at 32 GB before.
And, unfortunately, there is no reverting back to BIOS v.1.11 from anything after v.2.55. It asked me if I was sure I wanted to proceed...this was the last type of problem I expected to see though. (I also tried reverting back to previous versions of the BIOS that were allowed and it didn't work...
View 9 Replies
View Related
Apr 15, 2014
I just updated my bios on my Z510, and now the only boot options i have is network boot, something that i don't use. I used the bios update tool that Lenovo is distributing from the drivers page for my PC.
View 8 Replies
View Related
Feb 24, 2014
After updating to brand new BIOS from Jan. 19th I cannot boot anymore into Windows 8.1 - always get INACCESSIBLE_BOOT_DEVICE. Tried to repair using a Windows 8.1 USB Stick, no success. Even downgrading to 1.08 did not work as well!
View 1 Replies
View Related
Dec 29, 2011
I bought windows 8 .1 machine from factory. Then I had local shop install 8.1 on larger ssd. I just performed latest bios update and now machine will not boot. I am sure this is uefi related but I am not knowledgable in that area. The boot parameter returned to me by the shop was "legacy only" and secure boot was disabled.
View 8 Replies
View Related
Jun 6, 2014
Get error firmware update failed when trying to flash Bios update 7ccn35ww. Tried several different ways no luck.
View 7 Replies
View Related
Jan 27, 2014
I have a Ideapad z510.
How I can update the BIOS so I can be able to access advanced options such as memory config, enabling turbo boost, overlocking, changing the boot order (HDD, CDROM, USB, etc)
Currently the BIOS is a very simple and doens't give me advanced options and information.
View 2 Replies
View Related
Feb 6, 2014
W540 20BG001CGE, had BIOS 1.05 and RAID 1 with two Samsung 840 EVO 1TB working fine under Windows 7 - x64. Did a (by lenovo update tool recommended) BIOS Update with the bios update manager to 2.05. Update ran fine. After Rebooting (and loading defaults, disabling Intel Rapid Start, Changing BIOS boot option to legacy first ... I recognized SATA Option (AHCI or RAID) in BIOS is gone. At boot Intel Matrix Storage Configuration doesnot appear anymore (where you can build RAID etc).
Boot then brings up message "missing operating system".
Downgrade to BIOS 1.05 impossible, due to ISO File on www.lenovo.com support is not system compatible, message "Lenovo Group Limited - Invalid system disk; Replace te disk, and then press any key")
(The link to the ISO File version 1.05 at the bottom of this page links a non bootable ISO image [URL]....)
Also the downgrade to BIOS version 1.08 found here [URL] .... does not work, CD also messages "Lenovo Group Limited - Invalid system disk - Replace ...").
Rewriting BIOS version 2.05 (GNET57WW) does not work (says "BIOS update not necessary").
Embedded Controller Version GMHT25WW (1.10) ME Firmware Version 9.0.22.1467. How to get back my RAID controller?
View 9 Replies
View Related
Dec 5, 2014
Both me and a friend of mine have Lenovo W540s. Everything was working perfectly fine with all of our hardware, until today. A BIOS update came out and installed correctly on both of our machines. After this update both of our UltraNAV features on the trackpad are all dead. After that first restart a message appeared "finding new hardware" and it found a generic mouse on the laptop. Now when I try to re-install the UltraNav drivers, it says no hardware found. I tried both the drivers on Lenovo.com and the manufacture's website all with no luck.
How to fix our UltraNav pads?
W540 | i7-4930MX | 16GB RAM | Quadro K2100M | RAID 0 Dual 512 SSD
View 9 Replies
View Related
Dec 13, 2013
I get the error in the Title after i tried to flash the latest BIOS update for the Z510. I can press ok and then get into the boot manager but i cant choose anything there. Also I cant boot from a Disk with e.g. XP on it.
I also tried the Inside BIOS crisis mode (fn+r) with the BIOS file on my USB drive but it doesn't work and tries to access the file on the USB drive but boots normally instead to the error again. (Couldn't try it with removed battery as I have to remove the whole back to remove the battery on the Z510).
View 9 Replies
View Related
Apr 26, 2010
My dv9843cl will not start, refusing to even go into BIOS, even though the screen turns on. This is suspiciously similar to what happened to my last laptop, and I suspect that a faulty graphics chip is at fault. I was playing Team Fortress 2 shortly before it crashed, and it was performing poorly, and occasionally making random colored boxes or random interference appear on the screen.
Unlike my last laptop, however, I'm not sure if there was a recall for the graphics chip, and since I bought the laptop in 2008 from Costco without anything other than the standard warranty, I'm probably not eligible for free repairs, right? -_-
View 6 Replies
View Related
Sep 14, 2014
I bricked it with a bios now it shows a blank screen no video. How do i restore it.
View 9 Replies
View Related
Jun 7, 2013
Update Retriever/System Update can't find USB drivers for model 20BH. gmy104ww
View 4 Replies
View Related
Jan 30, 2014
I have recently decided to upgrade my RAM from 2GB to 4GB. After installing, I booted up my computer to find that it would not recognize the new memory. After doing a bit of troubleshooting, I decided to try and update the BIOS, as the version was from 2010. I downloaded the BIOS update boot CD application from lenovo, burned a disc, and on reboot I found that the boot order did not have CD listed on it. Here's the catch: I don't have the supervisor password. This is a hand-me-down laptop, and I have tried to find the password to no avail. This is the current boot order: USB drive, Hard drive.
My question is, can I either create a BIOS update disc using a USB, or update the BIOS some other way?
I understand that it is impossible to recover the supervisor password without having it serviced (which I would rather not do, even if I have to send my RAM back to Crucial)
My system specs:
Thinkpad L512
Bios version: 1.04
Bios date: 2010-3-26
Embeded Controller Version: 1.01
Windows 7 32 bit
View 3 Replies
View Related
Apr 26, 2013
I just did a BIOS update the other day. No idea what version it is. When I booted it said it "detection error on HDD...". I have since reset the BIOS options to default, and now it boots to a DOS-like boot screen that shows the ATA HDD0 drive. But selecting it and hitting enter just flashes the screen and nothing happens.
When I attach a USB thumb drive with Linux, it shows up in the options on the DOS-like boot screen, but selecting it won't boot from it.The laptop is now totally uselss and I'm losing days of time and it's a major problem.
View 1 Replies
View Related
Nov 24, 2013
I have a Yoga 2 Pro. How can I find out if I need to update the BIOS?
View 1 Replies
View Related
Jul 23, 2014
I want to upgrade my BIOS, but there is no update available for bios in windows 8.1.. My Bios version is 1.18, I want to update because i read somewhere that if your fan make noise make sure you have updated BIOS :A.. I want to know if I can install "BIOS update for win 8" in my lenovo t410 with windows 8.1..
View 7 Replies
View Related
