my laptop is z500 and i've installed the windows 8.1 enterprise x64 but i don't have bios update and windows 8.1 is nothing have a bios setup or bios update,.Where can I find the bios update for z500 windows 8.1 x64 ??
View 9 RepliesI have a Lenovo Z500 notebook and I would like to know if is it safe to run 1.21 BIOS update for Windows 8 on Windows 8.1 64bit? I have a problem with Fn keys and in my current BIOS (1.10) there are no option for it.
View 3 Replies View RelatedI have recently updated Lenovo Z500 to windows 8.1 but I have to reset and get back to windows 8 , not updated properly.
How to update windows 8 to 8.1. Do I need to uninstall some programs also before updating or have to install windows 8.1 drivers before updating windows 8 to 8.1 ..
Update Retriever/System Update can't find USB drivers for model 20BH. gmy104ww
View 4 Replies View RelatedI have an Ideapad Z500 with an W8.1 installed on it. I updated the bios to the last version but after that I can not control the luminosity level anymore. When I try to do it pressing the Hotkey it trurns to the lowest level of luminosity and I can only fix it by pressing the hotfix key when the laptop starts. I can not return to the old bios version. What shall I do?
View 2 Replies View RelatedI have trouble with my audio driver on my lenovo laptop. After I updated BIOS to version 1.21, my sound stopped working. I tried to reinstall audio driver, but when I reboot my computer, sound is not working again.
I read about flashing BIOS back, but I dont know where to download old version.
I have a Yoga 2 Pro. How can I find out if I need to update the BIOS?
View 1 Replies View RelatedAfter updating to brand new BIOS from Jan. 19th I cannot boot anymore into Windows 8.1 - always get INACCESSIBLE_BOOT_DEVICE. Tried to repair using a Windows 8.1 USB Stick, no success. Even downgrading to 1.08 did not work as well!
View 1 Replies View RelatedWhen I was write cd with nero and ashampoo after a minute write half of it but at the end of write cdrom say error in writing on CD and say its problem for windows ..
My windows in 8.1 and register right ! My laptop in z500 notebook
I have z500 model laptop. I've just reinstalled windows using flash drive. But I installed a pro version and I need to activate it using my OEM Windows license. How can I do this?
View 3 Replies View RelatedMy problem is that suddenly keyboard isn't working in windows . it works while entering password, after that it doesn't work . knowing that yesterday it was working properly.
View 3 Replies View RelatedI open this post to report a brightness problem on Lenovo Z500 Ideapad. Yesterday I've upgraded to OS Windows 8.1 and when I adjusted the screen brightness it goes off, and brightness adjust function doesn't works. I've solved my problem reinstalling the Intel video drivers, downloaded from Lenovo Driver Support.
It seems that Windows 8.1 upgrade disables video drivers.
Just purchased a G50-30 with win 7 x64. Decided to update the BIOS A7CN40WWW_64 from Lenovo website. The notebook version was A7CN23WW.
Upon reboot, after successful BIOS update, Win 7 booted with errors of Repair option or Normal boot up. Even re-installation of Win 7 will yield BSOD - ACPI non compliant.
Have changed BIOS settings defaults from UEFI to Legacy, it still does not work. This BIOS version is not stable. Can i request for the earlier version of BIOS ?
I just bought Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
I really don't know how to update the bios for the 505s. Where can i download the new bios update and also what are the steps that I have to take? Will the program just update everything once you press yes or will you need to go in to the bios in the start up or what?
View 5 Replies View RelatedI downloaded the BIOS package from the link: [URL] ..... but I don't know how to update the BIOS. I tried running the file Winflash_Yx00s.bat as Admin but nothing happens. Do I need to flash it using a USB stick and if so then how to do it.
View 2 Replies View RelatedMy Lenovo G40-70 that I've just bought 6 months ago where I accidently bricked the laptop after BIOS update. It seems during the BIOS updating process it when well but after 2nd reboot there's some message on the screen that the BIOS failed to update factory setting and it freeze on the message for quiet sometimes. After a long wait I decided to long press Start button for hard reboot. Then the scary part comes in where it seems the laptop can't longer shows the Lenovo logo & cannot even boot to Windows, just black screen.
I would like to tried myself first before ending up with warranty claim since I'm worried I've brick the warranty due to wrong BIOS update procedure....
I have a small issue with my Lenovo G580 (20150). I have Windows 8.1 and i have noticed that my 4GB of RAM DDR3 run at 800mhz. I have searched for everything, even swapped the RAM but there is no change in the frequency, it simply runs on 800mhz. I have tried to update the BIOS from 5ECN39WW (v 3.05) to 5ECN96WW, but whenever i try to do that it comes back with the error message "DC detect error!".
View 3 Replies View RelatedI am unable to update the BIOS on the Thinkpad listed below.I have tried to run Boot CD version of the update program (using CD player in dock) and it reports the error:"The system program file is not correct for this system"..The Windows based BIOS update program reports the error (in or out of dock):
"The process does not recognize this system. The process has been cancelled"..The Lenovo support page lists the new BIOS as being appropriate for this model. The BIOS reports the correct model and serial number.I desire to update the BIOS only as part of a software reload / refresh of the laptop. No actual problem with current BIOS to my knowledge.
Thinkpad X220
Model 4287 2VU
Current BIOS 1.11 (8DET41WW) 2011-03-28
Attempting to apply BIOS 1.37.1.24 (2013-02-06)
Lenovo IdeaPad U310 with i5-3317U CPU and Bios ver 65CN89WW (09/04/2012)
I downloaded BIOS Update file (65cn21ww.exe) from ([URL]...), but after start I got a message "ERROR 233 - Only secured capsule is allowed on a SecureFlash system! Status = 1."
What am I doing wrong? How to install the update BIOS?
I'm looking for a Lenovo B575 bios update/flash utility since my BIOS has gone bad. I cannot change/save changes and cannot restore to defaults.
I cannot find bios updtae on lenovo site (not on drivers for B575 and not under the drivers matrix). I've even tried via "Phoenix" as it's their Bios, no good. And even via a third side component (biosagent plus) that should have Phoenix bios, still no good.
I have recently downloaded a BIOS update for the G580 - version 20150, and ever since that I am locked out of the BIOS setup menu. It asks for a password, however I haven't set up one, and such, I am unable to change any of the settings.
Changing the values there would be important, because the settings seem to be reset to a default state, for example, I am unable to start any 64bit virtual machines because hardware virtualization is disabled. I was running Qubes OS too, but I am also unable to boot off legacy (MBR partitioned) devices, which I do occasionally to test some new Linux distro when it comes out.
Apropos Linux: as soon as the system starts booting, the screen goes completely blank, and I have to keep pressing brightness-up to see if the system had started. Brightness controls also seem to behave strange under MS Windows too: on the lowest level instead of dimming (what it did before), the screen goes completely blank. The only good thing in this update is that bluetooth now seems to work more reliable under Linux.
Is there a way to remove the password lock from the BIOS and/or revert to the previous version to avoid the screen blanking issue? Would reverting the update also remove the password? If the password can't be removed, is there a safe way to change the settings from a running OS?
I recently upgraded my ThinkPad W530 laptop BIOS from version 1.11 (which it shipped with) to the latest, version 2.59.
After doing so, my two 16 GB DIMMS are not only showing up as 8 GB each, thereby cutting my usable memory in half from 32 GB to 16 GB.
I ran through all the normal hardware checks to ensure that one of the DIMMS wasn't bad. I tried each DIMM separately, tried in different slots, etc. They both show up just fine and even pass the memory quick test in the BIOS. Only, they are showing up as 8 GB DIMMs.
Is there a feature in the latest BIOS that would somehow limit this? It was working fine at 32 GB before.
And, unfortunately, there is no reverting back to BIOS v.1.11 from anything after v.2.55. It asked me if I was sure I wanted to proceed...this was the last type of problem I expected to see though. (I also tried reverting back to previous versions of the BIOS that were allowed and it didn't work...
I just updated my bios on my Z510, and now the only boot options i have is network boot, something that i don't use. I used the bios update tool that Lenovo is distributing from the drivers page for my PC.
View 8 Replies View RelatedI bought windows 8 .1 machine from factory. Then I had local shop install 8.1 on larger ssd. I just performed latest bios update and now machine will not boot. I am sure this is uefi related but I am not knowledgable in that area. The boot parameter returned to me by the shop was "legacy only" and secure boot was disabled.
View 8 Replies View RelatedGet error firmware update failed when trying to flash Bios update 7ccn35ww. Tried several different ways no luck.
View 7 Replies View RelatedI have bought used x131e 3367. After successful update of drivers (Win8) using System update 5 I decided to update also offered new bios. After flash and restart I can hear only beeps 1-3-3-1. I have tried to find solution to recover BIOS but no luck. Solution with wincrisis does not work for me. I have tried to use e_bcpvpw.exe with $0AG9000.FL1 file but no luck - Source file format not acceptable - missing header!
View 9 Replies View RelatedThe Sony site does not recognize this model. I don't know what else to do.
View 6 Replies View RelatedWhile attempting a recovery with a copy of the recovery partition as provided by Lenovo, I receive: "Windows cannot find a system image on this computer".
I have both the Lenovo recovery partition on the HDD that came inside the laptop (15.56GB, PBR_DRV) and a copy of it on an external USB HDD (booted from it!). Why can't the recovery software find it?
Where is that "System Image"?
I have a Ideapad z510.
How I can update the BIOS so I can be able to access advanced options such as memory config, enabling turbo boost, overlocking, changing the boot order (HDD, CDROM, USB, etc)
Currently the BIOS is a very simple and doens't give me advanced options and information.