My laptop at frst 3 drives on it. One around 1TB and the other two each 1GB. It had one key recovery functionality. I formatted, deleted and then created one big drive and then spilt that into three drives.
Now I want the one key recovert back along side those 2 drives which each was 1GB.
How can I do that?
I bought a new G510 Lenovo Laptop but I cant quite use the dedicated amd vga. Everytime I install the given amd drivers from lenovo's official page and I check the Device Manager in windows 8 I see that the only enabled graphic card is the integrated Intel HD 4600. I tried to install the Intel drivers first but I get a error message that says that the computer does not meet the minimum requierments for installing that software.
View 7 Replies View RelatedI bought a y400 in feb 2013 and it worked perfectly. Then i faced some SSD issues and the system would hang and needed to force restart .I had to install Ubuntu to work.. I sent it back in feb'14 under warranty and they replaced motherboard ,SSD , HDD , re imaged ,etc . Now i got it back and everything seemed to be ok but was facing display driver issues (tried everything to fix this) and ended up disabling my graphic card to make the system work seamlessly .
Having read on internet somewhere that windows 8.1 may fix the dispaly driver issue , I upgraded to 8.1 from the windows store . After downloading the update I had to restart to install windows 8.1 and it was stuck at 49 % at setting up on lenovo logo screen for about 2 hrs and I had to force shutdown.
After starting up again as expected it crashed. Now I cannot Safeboot nor can I use OKR .
After the booting up its landing lenovo logo screen for a while then jumping to select language screen ENGLISH US -> Advanced Options -> cannot find startup settings (to safe boot) any option i select for example system restore it then asks me for windows 8 setup or windows 8 OS when i select any one of them it hangs (blue screen)
Same happens when i use OKR .It loads the files and then boots to the same language screen . Since Recovery image is stored on separate drive all I need to do is format the C drive but how can I do it ?
I have a Lenovo Thinkpad X40 - 2371 that I would like to reset to its original Factory Settings. It does not have a CD-ROM drive so I can not use a Recovery CD. Its operating system is Windows XP Professional. I have tried to use the "Access IBM" and the "F11" buttons to see if I can find any Factory Restore option, but there is none.
View 4 Replies View RelatedI am going to install a SSD in my G510 and would like to know if it is possible to create a recovery DVD as my usb has only 100gb remaining and a full system back-up takes 288gb
View 3 Replies View RelatedI have bought Lenovo G510 with 1TB hard core i7
I want to add SSD hard with it.
How i can add hard. Is there any way to add SSD Hard
I know it's normally simple to activate the Turbo boost on the processor of all Lenovo Laptop .
There's no Intel Turbo Boost function in the BIOS (i have not tried to update the BIOS, not to loose the warranty). There' are no installed software on the laptop or the task manager. As my processor is a new series 4, I can't neither setup the Intel processor tool to check if i'm actually already at the top capacity of the processor's frequency.
My retailer says that the G510 laptop has a turbo boost (max. 3.4GHz) on its I7-4700MQ (2.4GHz normal frequency). Here's the link of my retailer's product's description: [URL] .....
I need to get recovery CD's for my yoga 11s to put it back to factory settings?
View 5 Replies View RelatedMy Lenovo Easy Camera has stopped working. First I tried updating drivers from Device Mananger but it said my drivers are up to date then I tried installing the new drivers manually from lenovo's website but no gain.
OS = Windows 8.1
driver version = 6.2.9200.10240
driver provider = Realtek
I newly purchased G510 which came with Intel HD Graphics 4600... I'm using Windows 7, 32bit OS as my business application works only on 32 bit.....Since i have configured for 32 bit i see RAM availability is showing 2.6GB....I know to show 4GB i need to install 64bit OS..My question is, can i disable graphics option in BIOS so my RAM gets more space...If so, how to do it in BIOS and is it safe?
View 1 Replies View RelatedI bought a new Lenovo G510 laptop. I downloaded Windows 8.1 from Microsoft DreamSpark, and burned ISO image on a DVD disc. When I try to install it on my laptop, I receive an error (it might be wrong translated):
Load Driver
A media driver your computer needs is missing. This could be a DVD, USB, or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.
Note: If the installation media for Windows in the DVD drive or on a USB drive, you can safely remove it for this step.
I already tried changing the following options in BIOS but no effect:
Configuration tab -> SATA Controller Mode from AHCI to Compatible
Boot tab -> Boot Mode from UEFI to Legacy Support
Boot tab -> Boot Priority from UEFI First to Legacy First
Also, I tried to insert CD with drivers which was in the box, but - of course - no appropiate drivers were found.
What happened? How am I supposed to install a Windows 8.1? What should I try?
I bought a Lenovo G510 notebook, I installed Win7 PRO 64bit. Everything is working fine except the video card, wich is AMD Radeon R5 M230. In the control panel/device manager: the video card not working code 43.installed a lot of drivers, but nothing work. I tried to install the intel video driver but its not working either, during the installation I get a message: my computer not have the minimum configuration to install this driver. ???
Every driver I use, I get from the Lenovos official page for G510 notebooks.
The notebook configuration is:
Intel Core I5 4200M, CPU 2,50GH
4GB Ram
WIN7 64bit Service Pack 1
AMD Radeom R5 M230 VGA
Because G510 wasn't really Windows 7 compatible, I decided to upgrade to Windows 8.1. But after the upgrade, there's no more Bluetooth. When I run Bluetooth setup from drivers DVD, it doesn't install because it can't find required device. Also at tjhe Device Manager, it doesn't show anything related to Bluetooth.
What happened to Bluetooth and how can I get it back?
I have a Lenovo G510 and Windows 8.1. I can´t use keyboard and mouse at the same time. When i typing the mousepad locks. I guess this is a feature but I wan´t it turned off but I don´t know how to do that.
I have tested with the drivers for Windows 8.1 and Windows 8, listed here: [URL] ....
I then even tried with installing the driver for Windows 8 from: [URL] ....
But when I got through the installation process the "installation program" says the driver couldn´t be installed.
I tried with the advice in this thread: [URL] ....
but I have synaptics 7.5 and not 7.4. I also tried fixing with the register but didn´t find the entry PalmKms. I did do find other entries with Palm.
I see this as a major problem since it makes me completely unable to use any program that require simultaneously use of the keyboard and mouse. Therefore I guess that must be a solution for this?
I have a problem with driver installation on my G510 notebook with Windows 7. I've installed all drivers, and only two had left: "Unknown Device" and "PCI Simple Communications Device". After installing the Intel Power Management Engine, the "Unknown Device" had disappear (installed successful), but second one is still not installed. VendorID (8086) and DeviceID (8C3A) suggests, that this is Intel Power Management, but this driver is already installed.
I tried to install different versions of this driver (even for Win8), but nothing changed.
How to swap function key in G510 Laptop with windows 8.1 ... i.e. without pressing Fn+F1 or Fn+F2. I want to press F2 key without pressing Fn keys ...
View 2 Replies View RelatedI've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.How can I say which audio chipset is installed and install the correct driver?
Lenovo G510 laptop; Windows 7
I'm trying to set up the laptop to use an external monitor via HDMI. I tried a setting but it didn't work. However the laptop screen went blank and now I can't undo the changes.
On reboot, the screen works until the Window splash screen then it goes blank as the computer continues to boot up.
Booting into safe mode works, but I can't access the graphics card properties from there.
Tried unplugging the HDMI cable, but doesn't work.
How can I bring back the default display settings without doing a hard reset? (It's not my own computer)....
I have a recently gotten my Lenovo g510, with a synaptics touchpad. My problem is that when I write, I can't move my pointer at the same time. It's like when I type my touchpad gets disabled, and when I stop the typing it enables again. I've seen some places that it's just to turn of/on palmcheck? But I can't find it in my settings. It looks like my menu is more up to date than the others, and therefore they have more detailed menus, but mine is pretty simple.
I will add a picture of my menu, when I go to my mouse settings, and then the settings for the synaptics.
Link to image ...
This is the picture most of the people refere to, but I don't have that menu ...
From time to time, nearly every day lately, my computer will get an alert in the system tray that the SATA drive is disconnected. It will then freeze and not come back. I have to restart the computer and then I get a blue screen that says "INVALID BOOT DEVICE". Windows will then send me in to the system recovery screen where my only option really is to do a system refresh. I have also tried the Lenovo One Key Recovery. At this point the computer is like having a new copy of Windows on it.
Lenovo support says this is a software issue and my "warranty" doesn't cover it. The computer is only 5 months old and has had this problem for 2 months.
The computer will work for a short time, sometimes up to a week and will do it again. Lately I'm having to do this nearly every day, sometimes twice a day. I've tried updating the drivers, not updating the drivers (after a refresh), doing all the windows updates or not doing any updates at all and the results seem to be the same no matter what.
I have the lenovo ideapad G510 and i get an error message when i trying to backup my system. the message is "current system can not support backup". why it doesn't work?
View 3 Replies View Relatedi have lenovo G510.i have enabled the Intel Virtual Technology is enabled from BIOS but when i installled Intel Processor Identification Utility shows Status as NO instead of YES. I have upgrades the BIOS 3.09 latest one so far but still same problem
View 2 Replies View RelatedI just bought Lenovo G510 Laptop with Intel HD 4600 and Radeon 8750M. Everything fine exept the fact it doesn't switches GPUs when I play games. I tried everything. I set it the max performence when pluged in to AC and I set it to use max performance when playing games. Nothing works, the games show that the Intel GPU is working and the Radeon not. I have the latest drivers from Lenovo, I searched over the internet, nothing works. I just cant get the 8750M to work.
View 9 Replies View RelatedLenovo V570, I'm on Windows 7 64-bit.
I have an esata port, and was going to get an internal hard drive with a case that converts the drive into an esata drive. I'm wanting to get a 3 TB drive, and in order to get it to read all 3 TB, I'll need to reformat the drive in GPT format (not MBR). Right?
I see a thing online that says the SATA controller has to be compatible with GPT in order to do this. I want to use it as an external drive, without any operating system on it, so I'm not worried about getting Windows to run on it; just if I can format it as GPT and get the full 3 TB out of the drive. I don't want to buy the 3 TB drive and then find out I can only get 2 because of the motherboard. If that site was correct, then I need to know if the sata controller is compatible with GPT.
I see this listed under the IDE ATA/ATAPI controllers list: Intel Mobile Express Chipset SATA AHCI Controller.
I tried to call Lenovo support but could only tell me that she thinks I have SATA 0 or 1, but nothing about the controller in this model or GTP compatibility.
How do I find this out?
Till now, my G510 with Win7 64 bit worked perfectly but after going into flight mode and coming back, it no longer recognizes any internet sources, wired or wireless.
Windows troubleshooter says I need to 'turn on wireless capability'. I don't see a wireless hardware switch anywhere on the laptop, fn+f5 does nothing and in the panel for the flightmode, only bluetooth appears (which I can also activate). The device manger says all of the network devices are working normally. I tried reinstalling the latest drivers from Lenovo, but that didn't do anything either. The Windows Mobility Center says that the wireless is turned off, but the 'turn wireless on' button is greyed out and is not able to be clicked.
In an earlier post, it was suggested to check if in "services.msc" the "WLAN AutoConfig" function is activated which is in my case true. WIFI is also activated in the BIOS.
Last thing I tried, was to bring with windows recovery the system back into a state where everything worked fine but also that did not work.
I havea serious problem with my G510 i7 4700MQ.When i plug the power adapter the cpu frequency is set 798 Mhz.When i UNplug the power adapter i can reach maximum 2.4 Ghz.Obvisously i cannot get turbo 3.4Ghz at all.Graphics adapter frequency is also drops to 200 Mhz when i plug the power adapter. is it a buggy notebook? My bios version is 3.05 and i know that the newer version is 3.09 but bios update is only available in Windows 8. I've got windows 7 intel processor diagnostic tool shows FAILED when accessing cpu frequency.
View 2 Replies View RelatedWhen i try to open the dolby digital from contol panel i get this error. In lenovo g510...
View 1 Replies View RelatedThe SSD originally came partitioned into two volumes. One of them was about 8GB and what it was originally used for. The other partition was about 14GB and was used by ExpressCache.
After formatting the primary partition on the other drive and reinstalling Windows 8.1, I decided to delete the two partitions on the SSD and to instead create a single 22GB partition to be used by ExpressCache.
ExpressCache was working perfectly until I enabled bitlocker.
Then the machine started playing up and I later learned that bitlocker was incompatible with ExpressCache. So rolled back the encryption on the main drive and uninstalled ExpressCache. Since I am not going to be able to use ExpressCache with bitlocker, I would now like to format the 22GB SSD with NTFS and assign it a drive letter.
This is where I have started running into problems.
Even though I do not have ExpressCache installed or running and I do not yet have bitlocker enabled, windows keeps failing when I try to format the drive.
I have tried to use a variety of tools to format the drive. All of them get stuck at 0%.
Tools I have tried include: diskpart, windows format, EaseUS partition manager and MiniTool Partition Wizard
Various tools I have tried report that the disk is healthy.
I have used diskpart to remove the partition and create a new primary one.
When I try to format the partition using diskpart, I get the message:
"DiskPart has encountered an error: The parameter is incorrect. See the System Event Log for more information."
The event log reports the following warning as a result of attempting to format the drive:
Event ID: 129
Source: storahci
Message: Reset to device, DeviceRaidPort0, was issued.
Event ID: 153
Source: disk
Message: The IO operation at logical block address d8 for Disk 1 (PDO name: Device0000036) was retried.
Event ID: 129
Source: storahci
Message: Reset to device, DeviceRaidPort0, was issued.
(This last warning will appear four times - roughly 30 seconds apart)
Is this a driver issue?
I have tried installing the "Intel Rapid Storage Technology Driver" and then formatting the drive, but it still gets stuck at 0% (this time however it doesn't report any warning in the event log) so I have resorted back to the Standard SATA AHCI Controller . How I can get some use out of my 22GB SSD?
It is a Toshiba THNSNX024GMNT
I have an HP Pavilion G6 that I purchased in December 2012. Yesterday I decided to get a new HDD to upgrade it and start fresh. It's a 1TB SSD+HDD hybrid by Seagate. It installed without a hitch, and I used my HP recovery CDs to do a factory format of the disk.It finishes, reboots, but instead of rebooting to the HP Windows 8 setup screens, it goes to what looks like Windows 8 safe mode with a box containing the date, time, and it says something along the lines of "HP diagnostics driver installation" with an OK. Clicking that or not makes it disappear, and there's a command prompt bar at the bottom left hand corner of the screen.The screen changes to an HP screen that begins to install drivers. It finishes, and reboots to a black screen that says "no boot device detected, please install OS."I ran a check of the drive and it's fine. I swapped my regular drive back in, and it loaded up fine. In fact that's what I'm using right now to type this. The boot order was never changed in the BIOs. If it were the connector failing I doubt it would load the drive that's always been in the computer. Loading up the newly formatted drive in an external enclosure shows that Windows 8 is indeed on it, but on a 93GB partition even though the drive is 1TB.
View 5 Replies View RelatedI`ve just received my new notebook and I had already bought the SSD drive I would like to use with it.In the first moment I thought it would as easy as described hereURL.... but my notebook has the windows 8 and the OKR 8.0 and I can't find the option to create recovery discs.
I found out that I can make a recovery media, a pen drive with at least 16Gb, to recovery the system. I would like to make the same with DVDs. create the recovery discs or to reinstall the windows 8 from scratch with the same license key (not even sure if I have one) the one preinstalled in my notebook?