Lenovo P/Y/Z Series :: Safe To Clock Y510p Model To 3.4Ghz
Dec 4, 2013I have read that the y510p model can be boosted up to 3.4Ghz, is this safe to do?
To be specific i'm using the SLI model, clocked at 2.4, with 16gb ram.
I have read that the y510p model can be boosted up to 3.4Ghz, is this safe to do?
To be specific i'm using the SLI model, clocked at 2.4, with 16gb ram.
I've just noticed that in my Y510P with SLI the CPU Clock drop to 2,4 Ghz when I play games or render some graphic, and go up to 3,2 Ghz when PC is at rest.
Is it normal? I think should be the opposite...
I have that laptop for about 4 months, today for some reason i went playing Maxpayne 3 and while in game, few minutes later the PC starts to BEEP like alarm clock without stopping, I cant see any heating problems, the GPU's are on 67C no more.
The main problem is that i cant see any messages from WIndows about any issues on the system
I have just checked with FURMARK - when the GPU1 goes to 80C its starts beeping - is it supposed to be like that?
I have an Inspiron 1420 and I'm going to upgrade to Windows 7, the drivers listed for the 1420 are outdated,
I can find newer ones searching the support site but they are listed for other models.
Is it better to just stick with the ones listed for my model or should I go with the updated ones. What do most people here do?
I just got couple of days old Lenovo IdeaPad z50-75, running on AMD FX-7500.First I jsut now noticed that my CPU runs at 1.07 Ghz, before it was always over 2 Ghz or so which was good ... but maybe I touched something some where in powr settings or something and now it stays on 1.07 even when cpu pretty much utilised. I have set power plan to high performance and also Energy manager is set to high performance mode and Conservation mode is on. why it doesn't clock itself up ? I feel that it is slower than before.
View 4 Replies View RelatedMy acer 8930G has a quad core q9000 at 2ghz 6mb cashe and 1066fsb, the graphics is 9600GT with 1gb ddr3 ram.
How do I go about overclocking and what are the safe limits for this model?
Oh and I just installed windows 7 ultimate and my windows performance went down from 6.9 (vista) to 2.4!
I have a W510 with Q720 CPU that absolutely will not clock above 1.60GHz. I am using the 135W power supply that came with the laptop and have my battery settings set to maximum performance. I've also installed the latest power management driver (1.67.09.03) and have checked in the BIOS to make sure that the scheme for AC power is set to Maximum Performance.
Funnily enough, i have another W510 that i use for other purposes and have replicated it's state to match my laptop and it's Q720 CPU has no problems turbo boosting above it's 1.60GHz ceiling. Even sitting at the desktop at idle, it hovers between 1.7-1.9GHz and shoots above 2GHz when opening applications and doing other things as it should. Mine on the other hand absolutely will not clock above 1.6 and the lack of performance im getting because of this is becoming frustrating.
Had a w540 for a few days and so far it'd be fine. At the weekend i used the laptop on battery for a long time and thus set the power-management low to conserve power.
However, today having switched back to power supply and setting power scheme to max performance the CPU is still concerving power.
Its running (according to resource manager) at 29% and no matter how much i do it sticks at that percentage. The laptop does feel like its running at that clock speed too ... everything is super slow ... can watch programs drawing in the display...
Intel provide a Tcase value:
"The normal processor temperature will depend on the chassis type, the hardware involved and the location of the computer, and it usually is lower than the Tcase."
Is there a place to find the "normal processor temperature" that Lenovo recommends for X Series laptops with various Intel CPUs operating at standard temperature (20 degrees Celcius)?
Here is an answer for the W Series. Is it the same as for the X Series?
I found a trojan that is attached to skype.exe. I have tried to start in safe mode pressing F8 on start up but I am not able to access safe mode start up. x201....3249-CTO....i7....4GB RAM....64-bit OS....Windows 7
View 9 Replies View RelatedMy lenovo Y510P used to always be at 100% but I have realized it has been decreasing by 1 every day. I have it on Maximum Battery Life with the Energy Management application.
It is currently at 85% and I would have posted this sooner if I had payed attention. I changed it to Optimized Battery Health and it is now dropping, currently at 75%.
I always leave the laptop plugged in because I usually play games on it such as battlefield, dayZ, counter strike, etc.
I've been playing Battlefield 3 for some time on Auto settings (most of them are Ultra) and my FPS were always in the range 65-85. Yesterday morning everything was fine, however at night when I opened the game again I had 10-15 FPS. I haven't changed anything in my laptop settings so I don't know why this is happening.
P.S: I only have 1 GPU (not the SLI version) so I know it's not a loss of power. But my battery settings are set to "Optimized battery health". Does it affect performance ?
I've got Y510p with USB 2.0 not working. By the time it malfunctioned it was under warranty and I sent it in the service center. They have claimed that it has been repaired (USB board has been changed) but it is still not working and my warranty ended like 3 days after I sent it back. Since then (1 month ago) I am returning it to the service center for 3 times (last one was today) and I feel they can't fix it. URL....
View 3 Replies View RelatedI have an Y510p laptop and I am not pleased with the hdd performance, so I wanted to add an SSD, but the slot is literally missing:
what am I supposed to do? I know that this laptop supports only M.2 SSD, and I am ok with that
I bought Lenovo Y510P . and because of just hyper-v feature on win 8.1 pro also i need to upgrade windows. I found product key with a software and after that i open the "add feature to windows 8.1" . And when I choose "i already have product key" and put the product key , it does not accept . and says "this key won't work" .
So what i should do for getting windows 8.1 pro pack ? and why product key does not work ?
Is it possible to overclock the GPU and CPU a lil' bit in my y510p ?? If yes, how much can i boost it up and if it's worth it though...?
View 9 Replies View RelatedWhen I recieved my Y510p about 8 months ago, the usb ports worked perfectly fine. Around October they stopped working properly. The only solution which I found to work was doing a system restore. When I did this, an Unrecognized Device in the Device Manager was no longer unrecognized, and was instead replaced by USB xHCL (or something along those lines). However, as soon as i restared my computer again, the ports broke, and the unrecognized device reappeared. Repeating the restore followed by a restart breaks the ports every time.
View 7 Replies View RelatedMy Y510p has been freezing on startup, every startup. It can be completely inoperable for upwards of half an hour before unfreezing. It unfortunately has been occuring since the computer arrived (21 March, this year), so I doubt it has been caused by any software I've added. Given my limited knowledge of computers.
Lenovo Y510p Model 20217
Windows 8(64 bit), Intel Core i7-4700MQ CPU (2.40 GHz), NVIDIA GeForce GT750M, 8GB RAM
I have a new y510p I just received this week. First thing I did was replace the 1TB HD with my own OCZ Vertex 4 256GB SSD Drive.When I power on the laptop for the first time, it does not find a bootable device (goes through network devices, then says no bootable devices). If I use ctrl-alt-delete to reboot the laptop, it then finds the drive on its own and starts booting into Windows.
I'd like to understand why this does not work on the first boot? I went into the BIOS and saw it says there that no drives are detected.This worries me slightly, as perhaps one day it will decide to no longer recognize the drive after the ctrl-alt-delete?
Is there any way i can clone the stock hdd on my y510p to an ssd without losing one key recovery?
View 9 Replies View RelatedOn my Y510p I am getting low memory warnings wether im playing a game or just idling or on youtbe. When I open up the task manager its says my memory is at 70%-100% WHILE IDLE but the programs are only using like 25%-40% memory so something is hidden. Just looking for a fix or allocating more memory to Windows. I have an 8Gb system.
Here is a screenshot of the task manager while I right this [URL] ....
Why this is happening I just got the computer yesterday. I've checked all the plugs everything is in fine.
View 4 Replies View RelatedHow do i turn SLI mode on my dual graphics GT750M on the Y510p laptop. GPU-Z says SLI is disabled. Can't seem to find a place to turn it on Nvidia control panel either. Device Manager does show 2 GT750m working right.
View 9 Replies View RelatedI bought this laptop recently. It comes with a single graphics card. I heard this model has ultrabay and you can add another graphics card. My question is is it true that you can add a second graphics card in this system with ultrabay? I am confused if SLI and ultrabay refers to the same thing. If that is the case then this system is non sli.
[URL] ...
After 60 seconds of inactivity, a video showing the new features of the lenovo y-series pops up. the only time it doesn't do this is when I'm in a youtube video or a game. I've changed the sleep setting to 15 minutes, but nothing has changed yet... I am on windows 8.1, have the 755M SLI, and the i7 4700-MQ.
View 5 Replies View RelatedSince i bought my lenovo Y510P SLI i got a problem.
When i am watching a movie/youtube clip/playing a game on my logitech pad i got a problem with performance.
After 3 or 4 minutes my movie/game starts to freeze like some kind of energy saver turnes on.
I put my laptop into highest performance via lenovo energy management.
I also checked the settings in windows energy management tool and everything seems to be fine.
I did not have such a problem with my G550 lenovo which i bought 5 years ago.
Currently i have only 128GB SSD inside my laptop and from time to time i'm connecting external drive.
Operating system: Windows 8.1 x64
Just got the y510p laptop and am trying to install Ubuntu so I have this bootable DVD and I wanted to try Ubuntu before installing as usual but I can't get the laptop to bot on dvd. On boot menu options there is only EFI and some kind of network options but no dvd. I tried following instructions here but no matter how many times I press F1 during startup, I can't get to boot menu and windows starts directly: [URL] Is it not possible to boot on dvd. The dvd is ubuntu 13.10 supposedly compatible with EFI and secure boot. I don't understand why there is no option to reorder boot devices like on all my older PCs.
I manage to get BIOS setup pressing restart and shift and then selecting UEFI firware settings and I do get to bios setups but again no way to find the option for booting on a dvd.
I have a Lenovo y510p, and it doesnt charge over %60.
It says it is charging, but it doesnt. My battery plan is " maximum battery life " in energy management.
when i change it to the "optimized battery health" it says, plugged in, not charging.
I searched about it, but couldn't find anything. How to charge it to do %100.
Recently bought a Y510p laptop and of course I wanted to have an SSD as the boot drive.
I downloaded a cloning software and cloned the Windows OS partition as I had intended to keep all of Lenovo's original partitions intact on the original hard disk.
I put the original HDD in a caddy and replaced the DVD Drive and put the SSD where the original HDD was.
I tried changing boot order in the Bios but no matter what it only reverts to boot from the original HDD.
I'm not sure what I have to do to make it boot from the SSD, clone all the partitions from the HDD? I don't have any Windows 8 disks or anything so I just want to clone the original hard drive as it came installed in the laptop.
my y510p is 5 months old, it's the non - SLI version, installed Win 8.1., warranty still valid. Today I worked on my notebook as usual, listened to some music and it suddenly turned off. It was connected all the time to the charger.
I tried to turn it on several times, everything seemed fine, the keyboard lights up and the LCD shows the normal Lenovo startup screen, but after 3-5 seconds notebook turns off. The OKR works the same way - the menu is shown for a while and after about 3 seconds my notebook turns off. No BSOD, no any other supporting symptoms. Tried to enter BIOS, it worked out, but the computer still turns off after few secs in BIOS.
I thought the reason might be too high temperature, but the notebook was almost always slightly warm, never hot and the cooling fan was running pretty quiet. My computer never fell off or was hit or anything.
I heard computers run a self-test before start. Is it possible that some component of the notebook can't pass the test?