Lenovo P/Y/Z Series :: Y510P Beeps While In Games Like Alarm Clock
May 16, 2014
I have that laptop for about 4 months, today for some reason i went playing Maxpayne 3 and while in game, few minutes later the PC starts to BEEP like alarm clock without stopping, I cant see any heating problems, the GPU's are on 67C no more.
The main problem is that i cant see any messages from WIndows about any issues on the system
I have just checked with FURMARK - when the GPU1 goes to 80C its starts beeping - is it supposed to be like that?
I've just noticed that in my Y510P with SLI the CPU Clock drop to 2,4 Ghz when I play games or render some graphic, and go up to 3,2 Ghz when PC is at rest.
I bought a Lenovo Y510P 4 days ago. The laptop is amazing and i love it execpt for one proble,... while playing games i get a message about every 5 minutes saying that my ram is full and to exit out of the game
i have my virtual memory setting set to No page file for both of the things that i could change the setting to (there were only two different things in the virtual memory options which where Windows 8 and (lenovo)).
what should i set windows 8 and Lenovos virutal memory usage to? i thought i was suppost to select no page file but that has not worked.
i have 8gb of ram and while gaming 60 percent of it is being used so i know its not full
My computer (the Lenovo Y510P) started acting up the first day I bought it. It runs smoothly and everything, but the speakers seem to crackle and pop whenever I play music or games (even at a low volume). I've been seeing that many Lenovo Y510P users have been having this same issue and can assume that the problem is a hardware issue because:
1) Installing different versions of sound drivers AND even downloading the recommended sound drivers from Lenovo DOES NOT WORK. 2) Changing the power options DOES NOT WORK. 3) Plugged in headphones and even bluetooth can hear the static.
I'm thinking about returning this laptop since this is the 3rd day of having it. If there's no fix for this defect, I'm returning it before the 7th day.
When my 1012 is booting there is an alarm (beeping) before Windows comes up. Not a few beeps, but probably 50-100. What is this and how can it be mutted?
I just got couple of days old Lenovo IdeaPad z50-75, running on AMD FX-7500.First I jsut now noticed that my CPU runs at 1.07 Ghz, before it was always over 2 Ghz or so which was good ... but maybe I touched something some where in powr settings or something and now it stays on 1.07 even when cpu pretty much utilised. I have set power plan to high performance and also Energy manager is set to high performance mode and Conservation mode is on. why it doesn't clock itself up ? I feel that it is slower than before.
I have a W510 with Q720 CPU that absolutely will not clock above 1.60GHz. I am using the 135W power supply that came with the laptop and have my battery settings set to maximum performance. I've also installed the latest power management driver (1.67.09.03) and have checked in the BIOS to make sure that the scheme for AC power is set to Maximum Performance.
Funnily enough, i have another W510 that i use for other purposes and have replicated it's state to match my laptop and it's Q720 CPU has no problems turbo boosting above it's 1.60GHz ceiling. Even sitting at the desktop at idle, it hovers between 1.7-1.9GHz and shoots above 2GHz when opening applications and doing other things as it should. Mine on the other hand absolutely will not clock above 1.6 and the lack of performance im getting because of this is becoming frustrating.
Had a w540 for a few days and so far it'd be fine. At the weekend i used the laptop on battery for a long time and thus set the power-management low to conserve power.
However, today having switched back to power supply and setting power scheme to max performance the CPU is still concerving power.
Its running (according to resource manager) at 29% and no matter how much i do it sticks at that percentage. The laptop does feel like its running at that clock speed too ... everything is super slow ... can watch programs drawing in the display...
I do have Lenovo Power manager icon on the taskbar, so I can monitor the battery charge. However, if I forget to watch the icon, the laptop goes into hibernation unexpectedly. Is there a way to enable a visual alarm like an pop-up icon which would remind of low battery?
My lenovo Y510P used to always be at 100% but I have realized it has been decreasing by 1 every day. I have it on Maximum Battery Life with the Energy Management application.
It is currently at 85% and I would have posted this sooner if I had payed attention. I changed it to Optimized Battery Health and it is now dropping, currently at 75%.
I always leave the laptop plugged in because I usually play games on it such as battlefield, dayZ, counter strike, etc.
I've been playing Battlefield 3 for some time on Auto settings (most of them are Ultra) and my FPS were always in the range 65-85. Yesterday morning everything was fine, however at night when I opened the game again I had 10-15 FPS. I haven't changed anything in my laptop settings so I don't know why this is happening.
P.S: I only have 1 GPU (not the SLI version) so I know it's not a loss of power. But my battery settings are set to "Optimized battery health". Does it affect performance ?
I've got Y510p with USB 2.0 not working. By the time it malfunctioned it was under warranty and I sent it in the service center. They have claimed that it has been repaired (USB board has been changed) but it is still not working and my warranty ended like 3 days after I sent it back. Since then (1 month ago) I am returning it to the service center for 3 times (last one was today) and I feel they can't fix it. URL....
I bought Lenovo Y510P . and because of just hyper-v feature on win 8.1 pro also i need to upgrade windows. I found product key with a software and after that i open the "add feature to windows 8.1" . And when I choose "i already have product key" and put the product key , it does not accept . and says "this key won't work" .
So what i should do for getting windows 8.1 pro pack ? and why product key does not work ?
When I recieved my Y510p about 8 months ago, the usb ports worked perfectly fine. Around October they stopped working properly. The only solution which I found to work was doing a system restore. When I did this, an Unrecognized Device in the Device Manager was no longer unrecognized, and was instead replaced by USB xHCL (or something along those lines). However, as soon as i restared my computer again, the ports broke, and the unrecognized device reappeared. Repeating the restore followed by a restart breaks the ports every time.
My Y510p has been freezing on startup, every startup. It can be completely inoperable for upwards of half an hour before unfreezing. It unfortunately has been occuring since the computer arrived (21 March, this year), so I doubt it has been caused by any software I've added. Given my limited knowledge of computers.
Lenovo Y510p Model 20217 Windows 8(64 bit), Intel Core i7-4700MQ CPU (2.40 GHz), NVIDIA GeForce GT750M, 8GB RAM
I have a new y510p I just received this week. First thing I did was replace the 1TB HD with my own OCZ Vertex 4 256GB SSD Drive.When I power on the laptop for the first time, it does not find a bootable device (goes through network devices, then says no bootable devices). If I use ctrl-alt-delete to reboot the laptop, it then finds the drive on its own and starts booting into Windows.
I'd like to understand why this does not work on the first boot? I went into the BIOS and saw it says there that no drives are detected.This worries me slightly, as perhaps one day it will decide to no longer recognize the drive after the ctrl-alt-delete?
On my Y510p I am getting low memory warnings wether im playing a game or just idling or on youtbe. When I open up the task manager its says my memory is at 70%-100% WHILE IDLE but the programs are only using like 25%-40% memory so something is hidden. Just looking for a fix or allocating more memory to Windows. I have an 8Gb system.
Here is a screenshot of the task manager while I right this [URL] ....
How do i turn SLI mode on my dual graphics GT750M on the Y510p laptop. GPU-Z says SLI is disabled. Can't seem to find a place to turn it on Nvidia control panel either. Device Manager does show 2 GT750m working right.
I bought this laptop recently. It comes with a single graphics card. I heard this model has ultrabay and you can add another graphics card. My question is is it true that you can add a second graphics card in this system with ultrabay? I am confused if SLI and ultrabay refers to the same thing. If that is the case then this system is non sli.
After 60 seconds of inactivity, a video showing the new features of the lenovo y-series pops up. the only time it doesn't do this is when I'm in a youtube video or a game. I've changed the sleep setting to 15 minutes, but nothing has changed yet... I am on windows 8.1, have the 755M SLI, and the i7 4700-MQ.
Just got the y510p laptop and am trying to install Ubuntu so I have this bootable DVD and I wanted to try Ubuntu before installing as usual but I can't get the laptop to bot on dvd. On boot menu options there is only EFI and some kind of network options but no dvd. I tried following instructions here but no matter how many times I press F1 during startup, I can't get to boot menu and windows starts directly: [URL] Is it not possible to boot on dvd. The dvd is ubuntu 13.10 supposedly compatible with EFI and secure boot. I don't understand why there is no option to reorder boot devices like on all my older PCs.
I manage to get BIOS setup pressing restart and shift and then selecting UEFI firware settings and I do get to bios setups but again no way to find the option for booting on a dvd.
Recently bought a Y510p laptop and of course I wanted to have an SSD as the boot drive.
I downloaded a cloning software and cloned the Windows OS partition as I had intended to keep all of Lenovo's original partitions intact on the original hard disk.
I put the original HDD in a caddy and replaced the DVD Drive and put the SSD where the original HDD was.
I tried changing boot order in the Bios but no matter what it only reverts to boot from the original HDD.
I'm not sure what I have to do to make it boot from the SSD, clone all the partitions from the HDD? I don't have any Windows 8 disks or anything so I just want to clone the original hard drive as it came installed in the laptop.
