I've a new Thinkpad W540 with Windows 7 64bit. I can't see the Card Reader in the device list. When I insert a SD Card, nothing happens. All I/Os are enabled in the Bios. What can I do?
View 3 RepliesSo I installed Windows 8 (Clean install, no upgrades) on the machine and since then the card reader isnt working. I downloaded and installed the drivers from Lenovo Website and after failing from Driver Genius and then from ThinkVantage System Update 5.03. Still doesn't work, I install them, but after I reboot it is installed but the card reader doesn't work (It was working before on Windows 7 on the same day I installed W8). I updated to 8.1 and the problem continues.
View 8 Replies View RelatedI have tested the following on 2 identical W540 machines.After installing Windows 8.1, the internal camera is not working. I dont remember if the camera worked before we installed 8.1. I have installed all relevant drivers and updated all windows updates. I have installed all drivers from System update.
View 9 Replies View RelatedI might have seen the numeric keypad keys work once since getting this machine, but now can't get the keys to produce numbers. Some of the keys initiate other actions not associated with numeric data entry.
I tried removing the wireless dongle for my Microsoft wireless mouse but no improvement -- I simply swapped this MS mouse from my old W510 without doing any formal install.
This doesn't appear to be a hardware problem since the keypad keys have some effect -- just not the intended effect.
I have a new W540, and the microphone mute button does not work properly. When I press fn+f4. the red LED turns on, the slashed out microphone appears on the screen, and the volume settings for both the "Microphone" and "External Mic" are muted in Windows. However, audio from the microphones still capture audio, and it can be recorded on applications like Audacity and Skype.
Manually muting the microhphones via the Sound dialog in Windows has the same effect. The LED and OSD come on, but the microphone does not stop recording. As of now, I have found no way to mute the microphone outside of muting sound input in each individual applicaton.
My question concerns the non-functioning sleep mode buttons on my Lenovo W540 20BG.
In my current power management settings, the W540 is suppose to enter sleep mode by pressing Fn4 or by pressing the round power button shortly. However, either one of these methods do not work.
My computer does enter sleep mode when usign the Windows start menu (Start->Shut Down -> Sleep).
I have a brand new W540 with Windows 8.1 running. Some Fn-Keys are working, for example Fn+F2 for the volume. But I have some keys which are not working: Fn+F5 or Fn+F6 should change the LCD brightness.
Why these keys are not working? All updates are applied (Lenovo and Windows)...
Both me and a friend of mine have Lenovo W540s. Everything was working perfectly fine with all of our hardware, until today. A BIOS update came out and installed correctly on both of our machines. After this update both of our UltraNAV features on the trackpad are all dead. After that first restart a message appeared "finding new hardware" and it found a generic mouse on the laptop. Now when I try to re-install the UltraNav drivers, it says no hardware found. I tried both the drivers on Lenovo.com and the manufacture's website all with no luck.
How to fix our UltraNav pads?
W540 | i7-4930MX | 16GB RAM | Quadro K2100M | RAID 0 Dual 512 SSD
I've got 2 separate but really annoying issues with my W540 20BH:
- display brightness keys not working: when waking up from Hibernation mode, sometimer (really, randomly!) the display brightness keys (Fn+F5/F6) don't work.... either if the display brightness is stuck on max, min or an intermediate level...Is there a way to shut down and restart the process which commands the Fn keys?
- audio channel commutation gets stuck. Normal behaviour of the audio configuration is:
1) speaker volume disabled, mic disabled
2) when plugging in a 4-pin headset, headset's volume is on, headset's mic is switched on; speaker volume is still disables.
3) when unplugging the headset, speakers' volume is still 0
After each boot, the audio channel is at 0, but doesn't commute to the headset when plugged in! I have to open Configuration Panel, realtek properties. With this window open, unplug and re-plug the headset. Now, the volume has its normal behaviour.
Any better way to configure audio channels and evenments, which is able to bypass realtek's manager?
I just reveiced my Lenovo Thinkpad x240 20AL000AAU with SD card reader integrated.
I inserted an SD card standard size and the card is read properly, I can access all the files and I can write on it.
The problem is that I cannot extract the card from the SD card slot!
If I right-click on SD card in My Computer and choose eject, it says that it is safe to remove the card. If I select "Safely remove Hardware and eject media" it tells me that it is safe to remove it...but the card is stuck inside!
I read somewhere to press the card until I hear a click but I cannot hear any click.
Also the card is unreachable inside the slot. I cannot grab it to pull it. I can only press it a little bit with the nail, it goes one millimeter inside but I don't hear any click.
I've tried putting in an SDHC card in my laptop but it doesn't show up. Looked at Device Manager and there isn't even anything showing up. I tried installing the drivers provided on the support site but it still isn't working.
View 9 Replies View RelatedFor whatever reason my ringerprint reader stopped working. I've uninstalled and re-installed the driver, software and done just about everything I can find online.
In the device manager it usually shows up, but sometimes doesnt. In the control panel>biometric devices, it shows up less often, usually only after i've clicked "Scan for hardware changes."
My new W540 has the latest bios & software updates. It won't wake up from sleep...or rather the display won't come on. When I push the power button (pulsing green), it goes to solid green and the fingerprint scanner light turns on, but no screen. I scan my fingerprint and the scanner light turns off, but still no screen. The only way to bring it back to life is a long press on the power button and a reboot.
Nothing plugged into any of the ports. It does this regardless of whether it's plugged in or on battery.
I am considering replacing the original 512 MB HDD that came with my W540 to SSD with similar capacity.
From what I read, the performance difference is huge
I am using - Win 7 pro and my reason buying this beast is solid CAD drafting
Anything special I need to know regarding BIOS, driver setup, other issues, SSD recommendations?
I have just ordered a w540 and I'm wondering if I can add a second hard drive (actually what I want to install is an SSD) to it. In which case I failed to find the appropriate message...
View 9 Replies View RelatedI waited a long time for this new W540. Downlkoad all the newest drivers and did all the updates and now this POS will not shut down. Just goes to a black screen and have to hold the power button to force a shut down.
When I try to reboot the screen goes to black right after the home screen with a twirling cursor. Had to send my new W530 back for hard drive failure and now this W540 is screwed, too!
When I put my laptop to sleep or it sits idle for a period of time and goes to sleep on it's own it stops recognizing the laptop monitor. It will still display on other monitors connected through the docking station, but not the laptop. It doesn't matter if I put it to sleep while on the dock or off the dock, it never recognizes the monitor.
I have an Intel HD Grpahics 4600, and an NVIDIA Quadro K1100M video cards. I've checked drivers for both and they both say they are up to date (9/29/14 for Intel, and 09/12/2014 for NVIDIA). I have also updated every possible thing in the Lenovo System Update.
This problem occured after switching from windows 7 to windows 8.1.I have also lost the ability to control the brightness of my laptop monitor through my computer at any point in time. The function keys don't work, and the setting is not shown on my power manager.
I recieved the W540 a few days ago, and I see there is a slot behind the battery for a SIM card, I tried using my SIM card and I still can't use mobile broadband. Can I use mobile broadband on the W540? do I need any drivers? and if I can't use it, can I buy something like this for the expresscard slot and insert the SIM in the slot behind the battery?
View 8 Replies View RelatedI got my w540 in about 2 weeks ago, and finally had a chance to start migrating everything to it last week. I bring my laptop(s) to and from work everyday and right now I'm bringing a w520 and my new w540. But everyday since I started bringing my w540 home with me when I get home the laptop is running when I take it out of my bag.
So yesterday and this morning, I made 100% sure the laptop was in sleep mode and nothing was running before I put the laptop in the bag. I get to work 15 minutes later and the laptop bag is about 150 degrees because the w540 is running even through the lid is closed.
I just received a new W540 and I am unable to boot from CD/DVD. Any attempts result in a BSOD indicating the BIOS is not APCI compatible
Link to picture
There is no UEFI/BIOS options to set the 'SATA Controller Mode' accordingly, nor does the [F7] text mode option work.
We have three dock posibilities:
- basic dock
- pro dock
- ultra dock
They differentiate by the number of ports and by the power adapter supplied with them. I had an opurtunity to try my W540 on pro dock, which normally has 65W or 90W power adapter. The computer warned me about insufficient power, and did not charge on dock, everything else worked fine. The I disconnected 90W and connected my original 170W power supply to the doc. Everything is working normally since.
So, my question is: Since I don't need all the ports on the ultra dock, nor on the pro dock. Would basic dock work with W540 and 170W power adapter too?
Is it possible to set the backlight on the keyboard to always stay on when the screen is open?
View 7 Replies View RelatedMy W540 recently became unable to charge while the laptop is running. When the laptop is off, the battery will charge completely. As soon as Windows (or Linux) boots, the charge terminates and the computer starts running off battery power. The computer will boot without the battery installed, but the computer turns off as soon as either operating system is booted (a few seconds after the desktop appears).
I have tried a different power adapter without success (both adapters are Lenovo 170W supplies) and also put a different battery in (also genunie Lenovo battery) but the issue still remained.
The laptop is still under warranty, could it be the charging circuit on the motherboard? Will I have to ship the laptop back to Lenovo for repair? I am out at sea and might have to wait a while to get back into port to be able to ship the unit back to Lenovo, so I would like to investigate other options.
New W540, bios 2.10, latest drivers installed, 20BH
My w540 is not registering my Samsung 840 Pro SSD in the 9.5mm ultrabay adapter.
Not showing in BIOS, and not showing in disk manager or in device manager anywhere. I just want to use it as a second drive.
Main drive is 7200 rpm - with a Win 7 corporate image on it.
I have a W540 Laptop with 170W Ultra-Dock. I have setup 3 external monitors, but can't seem to get my 3rd monitor to run at 1920x1080. Whenever I set it to that resolution and I move a window to that monitor, the window flickers and shakes.
I have my right monitor at 1920x1080 (VGA), my middle monitor at 1080x2560 (DisplayPort), and my left monitor at 1440x900 (HDMI) - this is the monitor that I can't get to work at 1920x1080.
Wondering if there is a max number of pixels that the graphics card can handle? I am using a NVIDIA Quadro K1100M 2GB graphics card.
I read on a review of that graphics card that it can support 4 monitors and up to 4K resolution (although not sure if it meant that all 4 monitors could be at 4K - I'm thinking not)
How to make this work?
Since I've installed Windows 8.1 I have a problem with Pantone Color Calibrator. No screen is found. **bleep**? It doesn't see my laptops screen. I tried to reinstall the program but it doesn't work...
View 9 Replies View RelatedI just got a new Lenovo W540. I installed a new Samsung EVO SSD inside to replace the stock mechanical hard drive. I'm now trying to boot from a flash drive to clean install Windows. I've done this so many times before on other laptops and desktops without a problem. For some reason now it will not boot from the flash drive. It shows it as available in the BIOS but it looks like it reads it for just a second and then goes right back to the screen that allows me to choose which drive I want to put to.The same flash drive works fine in other computers to boot to.I did check to make sure the USB drive was not excluded in the BIOS and it is not.
View 5 Replies View RelatedIs it possible to remove the Raid 1 Controller / Drive from a W540 that was ordered with it installed?
View 1 Replies View RelatedMy OS is Windows 8.1 last update. I own the Lenovo ThinkPad W540 work station. There is a program called Lenovo Toast and nothing appears or starts when I click on it. I have tried to download Lenovo Toast but have not succeeded. (I did not know where to look for Lenovo Toast ).
View 1 Replies View RelatedI just got me a W540 with docking. It is connected with two Samsung 24inc screens. They are connected with two display ports kables from the docking. I also have a wireless logitech mouse and keybord. And a Jabra headset connected.I have reinstalled it with windows 8.1 And now I have a serious issue that both screens turns off randomly while I work. They go black for 15 sec. And then re-appear. It seems like the computer looses all USB connection also while this happens. I sometime get an error msg. saying that I connected a USB device that cant be recognized. But most of the time nothing happens.
All 3 of us at work who has a W540 has this issue. So it must be known by Lenovo. I have an ongoing case with the support. But dosnt look like we are getting anywhere. They gave me this to try: URL...We think it could be a driver issue with the USB or that the computer is swiching between the Intel and the Nvidia gfx card.I think I have tried about everything, but can not figgure this one out. I have all the latest drivers from Lenovo installed. Tried to use a wired mouse and keyb. no change, tried with a DVI and Displayport to the screen. No change.
Here is a link to Lenovos System report on my W540. URL...