Lenovo X Series ThinkPad :: Booting From USB DVD On X121e
Jul 10, 2014
How to boot from a Lenovo recovery disk for Windows 7 on a USB driven DVD drive? The laptop is currently running Linux so can't run from within the operating system. The BIOS utility doesn't recognise the drive no matter what I select in the boot menu (USB CD, USB FDD or USB HDD) and the F12 boot utility also doesn't recognise the drive. Incidently, F12 does recognise the Linux USB drive so I know this works. The external drive is a Leicke DVD R/RW DVD.
The reason for wanting to boot from the Windows 7 recivery drive is to reinstall Win 7 on a new install, dual boot Linux (Mint), then install iTunes on WIn 7so I can sync my iPhone, and run everything else under Linux. I've tried using a Win emulator under Linux but unsuccessfully.
View 2 Replies
ADVERTISEMENT
Mar 26, 2014
I have a ThinkPad x121e (from memory) which I like. However it has a maximum memory threshold of 8Gb.
I need more memory so that I can host some Virtual Machines to do some development work - I was just wondering which current ThinkPad models supported 16Gb of RAM (not necessarily out of the box, but by purchasing from Crucial or similar).
I've searched and found a page but it wasn't up to date: [URL] ....
i.e. it doesn't show the X1 Carbon or the Yoga (I know it's not thinkpad) models
Basically I'm after something similar to what I've got with improvements (a little bigger would be fine but not too big - say 14" max) - good battery life, can have windows 8.1, a touch screen and can get an SSD (again happy to upgrade via crucial or other third party) and can support 16Gb of RAM.
View 4 Replies
View Related
Jul 8, 2014
My battery (FRU: 42t4957) is stuck at 2% and refuses to charge:
I kept it at 40-50% most of the time by changing battery threshold. Total cycle count was about 80 (84 now) first use date 2013-03.
On Saturday I tried to run a "discharge-charge-discharge-charge" cycle (by watching some movies) to reset the gauge of my battery. During 2nd discharge my laptop hibernated due to low charge much earlier than expected, when I turned it on it showed that the max capacity is 28 Wh and the battery is in the "poor" condition.
I tried to perform automatic gauge reset but didn't get much (29 Wh). I updated power manager and performed another automatic reset which failed too.
So I tried to make a manual reset and left my laptop paying a movie for a night. On Monday I plugged my AC adapter in but found out that the battery won't charge: "a battery error has occurred the battery cannot be charged".
I cleared residual capacitance by pushing the power button several times and reset the BIOS to defaults but got nothing.
If this problem can't be sold I would like to know the reason of it to avoid such things in the future. While googling this forum I met contradictory opinions on battery reset: ones say that it's extremely harmful because battery "doesn't like" to be discharged to 0%, others say its harmless.
View 4 Replies
View Related
Aug 18, 2014
I have an X121e. I would like to upgrade my wifi card with a 802.11ac card (Intel 7260.HMWWB)
I have no restrictions "white list" because I use an unofficial bios. I'd like to know if the antenna is compatible with the 5Ghz. If not, is it be possible to change it with another model?
View 5 Replies
View Related
Jan 28, 2008
I've been following instruction on this link to create bootable windows installation usb thumb drives [URL] .... And it's been working fine with usb 2.0 thumb drives on the X1C (old ver). However, for some reason it won't work with usb 3.0 thumb drives.
I've tried several, but everytime I select the thumb drive on boot selection, the screen blinks and goes back to boot selection. I'm assuming it's not reading my boot information. It works fine on usb 2.0 thumb drives.
View 4 Replies
View Related
Jun 10, 2014
I noticed that if i boot my TPY in tablet mode, the cursor simply doesn't show up even if i flip back to the laptop mode. i can only solve it by restarting and booting back from laptop mode.
If i boot from laptop mode however and flip to tablet mode, the cursor reappears when i flip it back to laptop mode.
View 1 Replies
View Related
Dec 26, 2014
I received my new Lenovo Y40 Laptop - 59423025.
It comes with a Hybrid 1TB 5400 RPM+8GB SSHD.
Does it automatically use the SSD for booting? Or is there something I need to do to enable this?
View 3 Replies
View Related
Oct 16, 2012
So like many V570 owners I encountered the same problem where the laptop does not turn on anymore. I'm not on warranty anymore so I couldn't send it in to Lenovo either. Based on what I read, this issue appears when the laptop goes to sleep (closing down the lid when the laptop is on, or letting the laptop sleep when you're not using it for a while).
So I was thinking, "Hmm it doesn't make sense to replace the motherboard just because the hard drive is on sleep". Why not just pull out the hard drive and memory cards and put it back in? So I unscrewed the smaller cover on the back of the laptop and unscrewed the hard drive (one screw), pulled out the hard drive (slide it backwards and pull out) and also pulled out the two memory cards (that are on the right side).
Then I simply put the hard drive back in and the memory cards back in place. Screwed the cover back on there and it TURNED ON!
First thing I did after that was go into the Power Options in Windows 7 (just search "Power Options" from the start menu) and went to "Choose what closing the lid does" and changed all the selections that said "Sleep" or "Hibernate" to either "Shutdown or Do Nothing".
NOTE: The down side is that you probably can't Sleep or Hibernate your laptop anymore. I'm trying to see if there's a BIOS update for this but the Lenovo Support website is not loading at the moment.
The UPSIDE is your laptop WORKS and you're not gonna be spending $$$ for an unecessary "motherboard' that they say they'll replace.
View 2 Replies
View Related
Dec 29, 2012
I recently got a U310 ideapad, and I am trying to run a Linux LiveCD that I put on my USB drive using uinetbootin. On the idea pad I made the settings for the BIOS have the boot order with USB FDD and USB Drives on the top. Even with fitting fn+F12 I am still not getting any success with the boot from USB.
View 9 Replies
View Related
Jul 22, 2014
My fan is not working properly, in fact it only runs for few seconds at booting and then never again.
My cores get about 70°C and higher (with only Skype and Chrome on), so I'm forced to use external fan to by able to work.
I found this problem when I was working and then my notebook suddenly shutdown a I wasn't able to turn it on for a while. Then I grabed it and I almost get 3rd degree burns.
Two noisy external fans, that I have to use to keep core under 70°....
View 9 Replies
View Related
Sep 16, 2012
I have a brand new z510 notebook, and I need to do a clean install of windows 8.1. Problem is that I can't seem to boot from CD or USB. I have entered the bios, and although the DVD rom drive works, and it shown correctly in BIOS, it does NOT allow me to add it to the boot list. Also, there is an option called 'Boot From USB' I enable that, and still the USB boot does not show up in the boot list. The only thing I have in the boot list is the 'Windows Boot Manager' and it lists the name of my drive.
I thought that maybe secure boot was the issue, but I tried disabling this, and is still doesn't let me do what I want. I just paid $800 for a top of the line laptop, and I can't even boot from a cdrom. Every computer I have had since the 1980s have allowed me to do just that without trouble.
View 4 Replies
View Related
Jan 13, 2015
I just did a OneKeyRecovery to reset the notebook (original Win8); after that I did an upgrade to Win8.1; now the notebook boots (reboot/shutdown) very slow, booting takes >5 min; when it's up it's quite ok.
Assume an issue with the SSD cache, SSD is not visible (device manager etc,), reinstalled smartcache, smartcache doesn't find an SSD....
View 5 Replies
View Related
Dec 24, 2014
I've bought a Lenovo IdeaPad Z50-75 ( with Free DOS ):
Bios Version: A4CN24WW (V 1.03)
I am trying to install Windows 8 but it just doesnt work. not matter if i allow secure boot or disable it. no matter if i choose from the "OS Optimized Defaults : [Win8 64bit]"
I changed the boot priority so that the DVD-Reader is on the highest place (1). Got a working Win8 DVD, also got win7 professional, but i'd rather install Windows 8.
Even though Win7 is okay too if it'll work then.
I don't know what to do other than switching around between all those options. and it doesn't work at all.
Whenever i start the laptop and choose to start with the DVD-Reader it lights up and nothing happens.
View 9 Replies
View Related
Jul 12, 2014
I bought lenovo z510 recently and liked its performance. But from last few days am facing issue when windows 8.1 boots .ie., when i power on my laptop i see "lenovo log" for more than 15 minutes and sometimes windows doesnt start at all. I have to restart few times manually with power button to see the windows screen.
Initially i thought it is due to windows update, but even after I turned off update, am facing same issue. My laptop is hardly a month old and it is very frustrating to see this happening .
View 3 Replies
View Related
Nov 5, 2012
My G580 suddenly stopped booting into Windows.
The first black screen with the Microsoft logo loads but afterwards I just get stuck in a black screen with the cursor which I can move around but nothing more.
So, my solution was to get into Safe Mode. Unfortunately although I don't have a password when Win7 boot, I'm asked for one in Safe Mode. The thing is neither the keyboard, nor the touchpad work so I cannot get past the login screen.
The keyboard works perfectly in BIOS, but not in the Windows login screen for Safe Mode.
View 6 Replies
View Related
May 26, 2009
I have a problem with my notebook Lenovo N200 (0769). It has appear out of a sudden.
It was working fine a few days ago but at one point it stopped booting.
The bios correctly recognizes (apparently) all the the major components... but it hangs at one point after the message:
"Mouse initialized"
The weird part is that it would not even boot from CD. It just hangs...
I tried removing the HDD and booting from a CD and everything went ok. I mean that the system would boot from the CD. So my suspicion is that the HDD is broken.
View 9 Replies
View Related
Nov 2, 2014
I have a y410p with windows 8 on it. I recently installed a debian based linux alongside windows so I can dual boot them.This required me to also add Grub to the the disk. But grub was in legacy mode and i had problems booting up win8. So, I used boot-repair to try to fix it, but it seems to have gotten worse.
View 3 Replies
View Related
Oct 5, 2014
i can't boot on an USB key, the secure boot is desabled and when i press enter to boot on the USB key nothing happen. I had tested with 3 different usb key and 2 different OS. And it work on other laptop i have a lenovo twist... i think its in the BIOS but i had check all options
View 2 Replies
View Related
Apr 1, 2014
I turn on my laptap and it start up normally. All are loaded up in the homescreen except the cursor which keeps on loading ( its like when you refresh). All keys are not working except to the CapsLock key, the touchpad and trackpoint ( color red) are working.
I remove the power source and battery to shut it down but it doesn't shut down! Now it is running for 5 minutes, and the screen still ON, continue to refresh. How to shut this down and restart.
View 2 Replies
View Related
Feb 17, 2014
What build in program in New X1 carbon is for optimizing (Maintainance) SSD? I believe the "defragment tool" provided in control panel is no use for optimizing the SSD?
View 2 Replies
View Related
Oct 7, 2014
I have checked the BIOS settings. Intel Hyper-Thread technology is checked as enabled. When I try to turn on Hyper-V Platform in Control Panel, I am told that Virtualization support is disabled in firmware. I see nothing else in the BIOS menu to turn on. What am I missing?
View 7 Replies
View Related
Feb 23, 2014
I have a 3 month old X1 Carbon. Last night i turned it off and suddenly today morning, I find that the device is not powering on. What's the deal? No response at all even after continuosly pressing the power button.
View 5 Replies
View Related
Oct 28, 2009
Can one add a SSD into the ultrabay of the W510?
View 8 Replies
View Related
Dec 24, 2014
I have disabled the secure boot and changed the boot to Legacy Only.It still doesn't work.I have also tried updating my bios to the latest version using the Lenovo Solution Center.
View 3 Replies
View Related
Dec 8, 2014
I have a x60s (t2400, 2gb ram) as a spare laptop (also just because i really like it).i know there are more models and that the cpu is solderd onto the mainboard. if i want a t7200 cpu, can i then just replace the entire mainboard? or does that later model have diffrent cooling wich my t2400 doesnt have?
secondly i hearred the discussion about 2 or 4gbs of ram. if i insert 4gb ram, then i just get 3 a 3.5 gb? and will an t7200 allow me to have more ram?and last is more an software issue; i use fingerprint to logon to windows 7 (home premium). is there a way i can set windows to only use fingerprint log on? (so you cant select other logon options).
View 5 Replies
View Related
Sep 7, 2014
My new W540 has the latest bios & software updates. It won't wake up from sleep...or rather the display won't come on. When I push the power button (pulsing green), it goes to solid green and the fingerprint scanner light turns on, but no screen. I scan my fingerprint and the scanner light turns off, but still no screen. The only way to bring it back to life is a long press on the power button and a reboot.
Nothing plugged into any of the ports. It does this regardless of whether it's plugged in or on battery.
View 9 Replies
View Related
Apr 1, 2014
How do to use SIM Card here in X240? My company laptop have simcard tray, but i dont know how does it works.
View 3 Replies
View Related
Aug 27, 2013
My X1 is about 18 months old. It was fine until today. The battery was low, so I plugged it in. The little blue light where the power connects illuminated, however the battery indicater in Windows did not change to show "charging", and the battery continued to drain.
Over the next hour or so I tried many things like shutting down, waiting, new A/C outlet, new power settings, etc. Tried the little reset hole on the bottom of the laptop. Nothing mattered... the little blue light is on, but the battery just drains.
Eventually, the battery drained and the X1 shut down. When I try to boot, I get a pre-boot message about a critical low power error, even plugged in, so my laptop is now a brick.This is a 3448-34U Thinkpad Carbon X1.
View 3 Replies
View Related
Dec 3, 2014
I am trying to do a clean install on my good, old Thinkpad X230 which came with 64-bit Windows 7 Professional. For some reason, I was not able to create a bootable media from the recovery partition. In any case, I wanted to avoid the recovery partition as I want a basic, non-bloated, and minimal install.
Hence, I downloaded a copy of 64-bit Windows 7 Professional from Microsoft/ digital river website. After performing the checksum, I used Microsoft's USB DVD Download Tool to make a bootable USB on Kingston Flash Voyager (USB 2.0; 8 GB; FAT32). BTW, just for the heck of it, I verified that it boots on my spare (and even older) Thinkpad X60 -- though it doesn't proceed when it sees that the X60 has a 32-bit microprocessor.
The relevant BIOS values and settings are as follows:
UEFI BIOS Version G2ET95WW (2.55)
UEFI BIOS Date 2013-July-09
UEFI Secure Boot Off
[URL] ....
I am posting this query after trying a number of solutions : rebooting from a USB flash drive on my Thinkpad X230. For some reason, nothing has worked and pressing F12 only shows the ATA HDD0 hard drive. Among other things, I have tried the following:
- Updated the Intel USB 3.0 eXtensible Host Controller driver using Lenovo's Thinkvantage Tools. Now it has version 1.0.9.254. Someone suggested to have at least 1.4.0.225 which is apparently available at Intel's website. I always considered downloading the device drivers from Lenovo to be kosher. Shall I download it from Intel's website?
- Disabled USB 3.0 from BIOS which made all USB ports to act as USB 2.0. Neither option works.
- Tried booting from all three USB ports (of which one is USB 2.0 and two are USB 3.0). Zilch.
- Have yet to try "reset BIOS to default" suggestion as it looked a bit of a last resort.
View 7 Replies
View Related
Jan 15, 2013
I just bought an X61 on ebay and installed Mint Linux, VirtualBox and the Win8.1 preview.
All was going well, except that the heat worried me. The fan was going, but no air seemed to be coming out, so I followed the service manual and dismantled the whole machine. The area between the fan and the heatsink vanes was completely clogged with oily dust and felt, so I cleaned everything, lubricated the fan and re-assembled the machine.
Now it will not turn on. No lights, nothing. I have checked all the internal connectors and all seem fine. I've done this sort of thing often in the past, although not in an X61.
The one problem that I encountered was that the keyboard bezel was glued to the case bottom near the LH hinge and in prising the glue apart, I had to break a small piece out of the bezel at the back, and I have reassembled it with a slightly loose rear part of the bezel.
So, my question is whether there is some sort of tiny switch in the video cable going up to the screen, and does this have to be accurately positioned wrt the bezel? Also, if I try to glue the bezel back together, would epoxy work with the bezel plastic or is there a better glue?
View 8 Replies
View Related
