Lenovo V570 C/E/K/M/N/V Series :: Not Booting Up / Turning On?
Oct 16, 2012
So like many V570 owners I encountered the same problem where the laptop does not turn on anymore. I'm not on warranty anymore so I couldn't send it in to Lenovo either. Based on what I read, this issue appears when the laptop goes to sleep (closing down the lid when the laptop is on, or letting the laptop sleep when you're not using it for a while).
So I was thinking, "Hmm it doesn't make sense to replace the motherboard just because the hard drive is on sleep". Why not just pull out the hard drive and memory cards and put it back in? So I unscrewed the smaller cover on the back of the laptop and unscrewed the hard drive (one screw), pulled out the hard drive (slide it backwards and pull out) and also pulled out the two memory cards (that are on the right side).
Then I simply put the hard drive back in and the memory cards back in place. Screwed the cover back on there and it TURNED ON!
First thing I did after that was go into the Power Options in Windows 7 (just search "Power Options" from the start menu) and went to "Choose what closing the lid does" and changed all the selections that said "Sleep" or "Hibernate" to either "Shutdown or Do Nothing".
NOTE: The down side is that you probably can't Sleep or Hibernate your laptop anymore. I'm trying to see if there's a BIOS update for this but the Lenovo Support website is not loading at the moment.
The UPSIDE is your laptop WORKS and you're not gonna be spending $$$ for an unecessary "motherboard' that they say they'll replace.
View 2 Replies
ADVERTISEMENT
Sep 21, 2014
Lenovo V570, I'm on Windows 7 64-bit.
I have an esata port, and was going to get an internal hard drive with a case that converts the drive into an esata drive. I'm wanting to get a 3 TB drive, and in order to get it to read all 3 TB, I'll need to reformat the drive in GPT format (not MBR). Right?
I see a thing online that says the SATA controller has to be compatible with GPT in order to do this. I want to use it as an external drive, without any operating system on it, so I'm not worried about getting Windows to run on it; just if I can format it as GPT and get the full 3 TB out of the drive. I don't want to buy the 3 TB drive and then find out I can only get 2 because of the motherboard. If that site was correct, then I need to know if the sata controller is compatible with GPT.
I see this listed under the IDE ATA/ATAPI controllers list: Intel Mobile Express Chipset SATA AHCI Controller.
I tried to call Lenovo support but could only tell me that she thinks I have SATA 0 or 1, but nothing about the controller in this model or GTP compatibility.
How do I find this out?
View 7 Replies
View Related
Nov 25, 2008
I just got a new lenove V570 with Freedos and would like to install Windows 7 professional.
When I try to install Windows 7 64 bit, I get the error: The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks?.
View 4 Replies
View Related
Feb 18, 2012
I was wondering if the default Energy Management battery setting of 50% can be changed on the Lenovo V570. I keep the laptop plugged in almost all of the time, and the popup suggests using the setting that keeps the battery at 50% all the time. That's fine in terms of not over stressing the battery, but if I need to unplug the laptop, I'd rather have a fuller charge than only 50%. I'd read that ThinkPads can be set to 90% or other settings. Is that possible with the V570?
View 9 Replies
View Related
May 8, 2014
I updated LENOVO V570 to win8.1, every thing looks good except the unknown device question mark in device manager.
It looks come from the power manager driver, because in the message center, it is said, power management does not work with a compatabale problem.
View 7 Replies
View Related
Jan 28, 2013
I am having 2 problems with networking on my v570. When hard-wire connected to a time warner arris modem, the computer sometimes recognizes the network but does not get internet access.
When connected to an airport extreme via the same modem, it connects to the internet but speeds are drastically low. when I hardwire connect a mac to the modem, it's blazing fast.
Something seems to be wrong with the connectivity [URL] .....
View 6 Replies
View Related
Dec 10, 2013
V570 1066 no longer sees 1tb WD Passport HDD in Explorer. it simply lists it as Local drive E: and doesn't allow access. The drive works fine on another laptop.
Running W7 w/ SP1.
IE 11.0.9600
View 2 Replies
View Related
Sep 25, 2011
I reinstalled windows the other day on my V570. Everything is working great except the wireless drivers which i cannot install. In my device manager under other devices, i get an unknown network controller.
I have downloaded and tried installing all of the drivers from the lenovo site as well as tried scanning on the Intel site. i will get the dreaded "no matched wireless" pop up.
I am using Windows 7 home premium which is what came on the machine.
View 4 Replies
View Related
Nov 14, 2011
I have recently purchased a Lenovo V570 From Best Buy with an i5 2410m and Intel HD 3000. When browsing the web, I came across the option for the V570 to have a dedicated Nvidia 525m Graphics Card.
View 3 Replies
View Related
Jun 30, 2013
I purchased a refurbished V570 for my son. Just received it the other day. Every time it boots up, the System Preparation Tool 3.1.4 boots up. Whenever I turn the laptop off and start it again, instead of showing the regular Windows 7 start up screen, it has a "Setting up your computer for the first time" (or something like that) screen. Once up and running, the tool pops up again. Windows 7 runs perfectly, no issues, I installed a bunch of things for him, but obviously this tool shouldn't be starting up and the laptop shouldn't be starting with the setup screen every time.
I did some digging around the internet, there is a bunch of info on this, but everything indicates that the Windows installation was not properly finished on my laptop. I went to all the places that are listed to possibly remove the tool, but can't find any references except a bunch in the registry which I don't really want to mess with on a "new" computer.
View 3 Replies
View Related
Nov 22, 2014
I have an IdeaPad V570 that experienced a total hard drive failure (be careful how hard to close the laptop in frustration) I had Best Buy try to recover data and opted not to pay for the recovery after the only crucial data did not seem to have been recovered. Best Buy told me the rest of the system seems to be intact so they could install a new Hard Drive if I wanted it back. They made me offers to completely restore the system at a price but I decided to save money thinking I should be able to restore the system myself. So they installed the hard drive and that was it.
I decided to go with Windows 8 after learning that support was beginning to wain for Windows 7. I purchased the OS from Best Buy and I am attempting to install it. So far that is not going well. The BIOS sees the CDDVDW drive and the HDD, both are listed in the BOOT menu with the right names. However the computer is not booting from the WIndows disk. I get a message ending with :
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
At which point it take me to the Boot Menu. I can see the order I have set for Booting is:
1. ATAPI CD: TZSSTcorp CDDVDW TS-L633F
2. ATA HDD: WDC WD10JPVX-22JC3T0
3. PCI LAN: Realtek PXE B03 D00
It seems to me that the system is trying to boot in that order but the CDDVD drive is not responding, the HDD has nothing on it so it goes for the PCI LAN and there is nothing for it to do so it returns the error an sends me back to the Boot Menu.
View 2 Replies
View Related
Jul 9, 2011
V570 - works great! Upgraded to Win8 but had probs with it so did a "refresh" and that pretty much cleared it up.Bored so got a Sammy 840Pro SSD. Cloned with stand-alone Acronis Trueimage 2013. Boots and works fine. Had the SSD plugged to the eSATA.Then I noticed that on cold startup, it was not giving me the BIOS options of F2 and F12, and pressing them did nothing - it just booted up Win. Did a lot of googling at this point but no joy.I then noticed that on a restart from Win8 , it DID give me the BIOS options and I could get into the BIOS. But that's a dicey way to run!!! I early on (a year ago) found that you cannot re-order the devices in BIOS - it resets them to what it wants. (latest BIOS 44CN36WW which is 43 - an old one)
Okay, so boot order is SATA port specific, I put my second HD into the primary position and hung the SSD off the eSATA cable. It insisted that the SSD was bootable device 8 (LOL) and tried very hard to boot from the Realtek LAN port. However it WAS giving me the BIOS options so I could hit F12 and choose the SSD and boot into windows. I also found that if I pulled the RJ45 before I hit power, it would try the Realtek, but then bounce to the list of devices - choose the SSD, and boot into windows.I moved the SSD to the DVD port (I had an adapter), but exact same thing - still calls it 8.So it works and is a good deal faster than the original Toshiba drive which did 90MB read. But there is that unfortunate pause in my 10-15 sec win boot!
View 4 Replies
View Related
Feb 28, 2013
I was trying to find the Active Protection System software for Win8 for while now, it's just not coming up anywhere. I really need to disable the disc freezing feature on my V570 cause it's super annoying (especially when watching videos).
Whether the software is available? I've tried the Win7 version, but there are some compatibility issues, so it doesn't work....
Also, if the software is not available yet for Win8, are there other ways of turning this thing off (BIOS, registry)???
View 2 Replies
View Related
Oct 26, 2012
I just upgraded to windows 8 pro x64 on my Lenovo V570 and it can't find the driver for my built in webcam. My girlfriend is moving away for 6 months starting next week and the webcam is really important for us to stay in touch.
View 9 Replies
View Related
Sep 24, 2009
my y510p is 5 months old, it's the non - SLI version, installed Win 8.1., warranty still valid. Today I worked on my notebook as usual, listened to some music and it suddenly turned off. It was connected all the time to the charger.
I tried to turn it on several times, everything seemed fine, the keyboard lights up and the LCD shows the normal Lenovo startup screen, but after 3-5 seconds notebook turns off. The OKR works the same way - the menu is shown for a while and after about 3 seconds my notebook turns off. No BSOD, no any other supporting symptoms. Tried to enter BIOS, it worked out, but the computer still turns off after few secs in BIOS.
I thought the reason might be too high temperature, but the notebook was almost always slightly warm, never hot and the cooling fan was running pretty quiet. My computer never fell off or was hit or anything.
I heard computers run a self-test before start. Is it possible that some component of the notebook can't pass the test?
View 5 Replies
View Related
Dec 5, 2010
I have a (long out-of-warranty) X100e of the dual-core model (notorious for running hot), which I have been running Linux on; the issue in question is hardware-related, though...
I've been trying to get an amd64 kernel going, with some issues. So I booted an amd64 kernel with init=/bin/sh, tried getting wireless going, and figured that I needed a different kernel, which I set about compiling...
The laptop reached 92 C and apparently tried to shutdown, but apparently shutdown does not work right if init is not running. So I came back to find it still running, at ~65 C, but with messages to the effect that it had reached 94 C on the screen. I put the fan on full bore, left it running for a while, then turned it off.
Now, here's the problem: When I tried to turn it on (battery in place, plugged in), the green light around the power button just started blinking slowly (about once per second), with the fan intermittently attempting to start (very short bits of an almost whining noise). There was no indication of any signal reaching the display/of the bios starting.
The power light stays green while it is plugged in. Same symptoms when the battery is removed and it is plugged in. With battery only, the power button blinks on when pressed, then turns off. The fan turns on briefly once. Then it turns off. The power light in front blinks on and then turns off
So far, I've tried several variants of "hold down the power button while unplugged with the battery removed." All of that has been to no effect. Looking through the HMM does not indicate anything as far as what might cause this.
View 2 Replies
View Related
Dec 26, 2014
I received my new Lenovo Y40 Laptop - 59423025.
It comes with a Hybrid 1TB 5400 RPM+8GB SSHD.
Does it automatically use the SSD for booting? Or is there something I need to do to enable this?
View 3 Replies
View Related
Dec 29, 2012
I recently got a U310 ideapad, and I am trying to run a Linux LiveCD that I put on my USB drive using uinetbootin. On the idea pad I made the settings for the BIOS have the boot order with USB FDD and USB Drives on the top. Even with fitting fn+F12 I am still not getting any success with the boot from USB.
View 9 Replies
View Related
Jul 10, 2014
How to boot from a Lenovo recovery disk for Windows 7 on a USB driven DVD drive? The laptop is currently running Linux so can't run from within the operating system. The BIOS utility doesn't recognise the drive no matter what I select in the boot menu (USB CD, USB FDD or USB HDD) and the F12 boot utility also doesn't recognise the drive. Incidently, F12 does recognise the Linux USB drive so I know this works. The external drive is a Leicke DVD R/RW DVD.
The reason for wanting to boot from the Windows 7 recivery drive is to reinstall Win 7 on a new install, dual boot Linux (Mint), then install iTunes on WIn 7so I can sync my iPhone, and run everything else under Linux. I've tried using a Win emulator under Linux but unsuccessfully.
View 2 Replies
View Related
Jul 22, 2014
My fan is not working properly, in fact it only runs for few seconds at booting and then never again.
My cores get about 70°C and higher (with only Skype and Chrome on), so I'm forced to use external fan to by able to work.
I found this problem when I was working and then my notebook suddenly shutdown a I wasn't able to turn it on for a while. Then I grabed it and I almost get 3rd degree burns.
Two noisy external fans, that I have to use to keep core under 70°....
View 9 Replies
View Related
Sep 16, 2012
I have a brand new z510 notebook, and I need to do a clean install of windows 8.1. Problem is that I can't seem to boot from CD or USB. I have entered the bios, and although the DVD rom drive works, and it shown correctly in BIOS, it does NOT allow me to add it to the boot list. Also, there is an option called 'Boot From USB' I enable that, and still the USB boot does not show up in the boot list. The only thing I have in the boot list is the 'Windows Boot Manager' and it lists the name of my drive.
I thought that maybe secure boot was the issue, but I tried disabling this, and is still doesn't let me do what I want. I just paid $800 for a top of the line laptop, and I can't even boot from a cdrom. Every computer I have had since the 1980s have allowed me to do just that without trouble.
View 4 Replies
View Related
Jan 13, 2015
I just did a OneKeyRecovery to reset the notebook (original Win8); after that I did an upgrade to Win8.1; now the notebook boots (reboot/shutdown) very slow, booting takes >5 min; when it's up it's quite ok.
Assume an issue with the SSD cache, SSD is not visible (device manager etc,), reinstalled smartcache, smartcache doesn't find an SSD....
View 5 Replies
View Related
Dec 24, 2014
I've bought a Lenovo IdeaPad Z50-75 ( with Free DOS ):
Bios Version: A4CN24WW (V 1.03)
I am trying to install Windows 8 but it just doesnt work. not matter if i allow secure boot or disable it. no matter if i choose from the "OS Optimized Defaults : [Win8 64bit]"
I changed the boot priority so that the DVD-Reader is on the highest place (1). Got a working Win8 DVD, also got win7 professional, but i'd rather install Windows 8.
Even though Win7 is okay too if it'll work then.
I don't know what to do other than switching around between all those options. and it doesn't work at all.
Whenever i start the laptop and choose to start with the DVD-Reader it lights up and nothing happens.
View 9 Replies
View Related
Jul 12, 2014
I bought lenovo z510 recently and liked its performance. But from last few days am facing issue when windows 8.1 boots .ie., when i power on my laptop i see "lenovo log" for more than 15 minutes and sometimes windows doesnt start at all. I have to restart few times manually with power button to see the windows screen.
Initially i thought it is due to windows update, but even after I turned off update, am facing same issue. My laptop is hardly a month old and it is very frustrating to see this happening .
View 3 Replies
View Related
Jan 28, 2008
I've been following instruction on this link to create bootable windows installation usb thumb drives [URL] .... And it's been working fine with usb 2.0 thumb drives on the X1C (old ver). However, for some reason it won't work with usb 3.0 thumb drives.
I've tried several, but everytime I select the thumb drive on boot selection, the screen blinks and goes back to boot selection. I'm assuming it's not reading my boot information. It works fine on usb 2.0 thumb drives.
View 4 Replies
View Related
Nov 5, 2012
My G580 suddenly stopped booting into Windows.
The first black screen with the Microsoft logo loads but afterwards I just get stuck in a black screen with the cursor which I can move around but nothing more.
So, my solution was to get into Safe Mode. Unfortunately although I don't have a password when Win7 boot, I'm asked for one in Safe Mode. The thing is neither the keyboard, nor the touchpad work so I cannot get past the login screen.
The keyboard works perfectly in BIOS, but not in the Windows login screen for Safe Mode.
View 6 Replies
View Related
May 26, 2009
I have a problem with my notebook Lenovo N200 (0769). It has appear out of a sudden.
It was working fine a few days ago but at one point it stopped booting.
The bios correctly recognizes (apparently) all the the major components... but it hangs at one point after the message:
"Mouse initialized"
The weird part is that it would not even boot from CD. It just hangs...
I tried removing the HDD and booting from a CD and everything went ok. I mean that the system would boot from the CD. So my suspicion is that the HDD is broken.
View 9 Replies
View Related
Nov 2, 2014
I have a y410p with windows 8 on it. I recently installed a debian based linux alongside windows so I can dual boot them.This required me to also add Grub to the the disk. But grub was in legacy mode and i had problems booting up win8. So, I used boot-repair to try to fix it, but it seems to have gotten worse.
View 3 Replies
View Related
Jun 10, 2014
I noticed that if i boot my TPY in tablet mode, the cursor simply doesn't show up even if i flip back to the laptop mode. i can only solve it by restarting and booting back from laptop mode.
If i boot from laptop mode however and flip to tablet mode, the cursor reappears when i flip it back to laptop mode.
View 1 Replies
View Related
Dec 15, 2013
I have lenovo thinkpad R60 laptop. Few days back i used to get error message saying stuck key 44 when i turn on the laptop and when i press esc key it used to boot. After some days my laptop is not turning on with battery. But when i put the adapter connected and on the A/C current, then my laptop is turning on.i did not work with my laptop for 2 days and when i turn on the laptop without external power supply it turned on with the battery. Then i worked it for 4 days with the battery and in the time when i am not working with laptop i used to charge the battery for 1 1/2 hour. suddenly i am again getting the same problem i.e laptop is not turning on with battery but turning on with external power supply. i have read some of the forums and i removed my battery and pressed on the power button for 50 seconds and immediately put the battery and turned on the laptop, but is not working.
View 9 Replies
View Related
