Lenovo C/E/K/M/N/V Series :: V570 Active Protection System On Windows 8
Feb 28, 2013
I was trying to find the Active Protection System software for Win8 for while now, it's just not coming up anywhere. I really need to disable the disc freezing feature on my V570 cause it's super annoying (especially when watching videos).
Whether the software is available? I've tried the Win7 version, but there are some compatibility issues, so it doesn't work....
Also, if the software is not available yet for Win8, are there other ways of turning this thing off (BIOS, registry)???
View 2 Replies
ADVERTISEMENT
Jul 18, 2013
On my Windows 7, APS works well with an icon on the system tray. But in Ubuntu (13.04), because of no driver, I dont know if APS works or not. The question is: does it still work silently without the driver on Ubuntu?If APS doesn't work, is my laptop harmed when it's shaken? Does Lenovo have any solution to get ASP worked on Linux (Ubuntu)?
View 2 Replies
View Related
Jul 11, 2014
I have the Modelle R400 running Windows 7 Pro (64 bit) on it.
If I run Lenovo Vintage Tools programm teh airbag/active protection icon is grey.
If I click on it it starts the installer and I can install it but after a reboot it shows me that it isn't installed/grey icon again.
View 2 Replies
View Related
Jun 30, 2013
I purchased a refurbished V570 for my son. Just received it the other day. Every time it boots up, the System Preparation Tool 3.1.4 boots up. Whenever I turn the laptop off and start it again, instead of showing the regular Windows 7 start up screen, it has a "Setting up your computer for the first time" (or something like that) screen. Once up and running, the tool pops up again. Windows 7 runs perfectly, no issues, I installed a bunch of things for him, but obviously this tool shouldn't be starting up and the laptop shouldn't be starting with the setup screen every time.
I did some digging around the internet, there is a bunch of info on this, but everything indicates that the Windows installation was not properly finished on my laptop. I went to all the places that are listed to possibly remove the tool, but can't find any references except a bunch in the registry which I don't really want to mess with on a "new" computer.
View 3 Replies
View Related
Nov 22, 2014
I have an IdeaPad V570 that experienced a total hard drive failure (be careful how hard to close the laptop in frustration) I had Best Buy try to recover data and opted not to pay for the recovery after the only crucial data did not seem to have been recovered. Best Buy told me the rest of the system seems to be intact so they could install a new Hard Drive if I wanted it back. They made me offers to completely restore the system at a price but I decided to save money thinking I should be able to restore the system myself. So they installed the hard drive and that was it.
I decided to go with Windows 8 after learning that support was beginning to wain for Windows 7. I purchased the OS from Best Buy and I am attempting to install it. So far that is not going well. The BIOS sees the CDDVDW drive and the HDD, both are listed in the BOOT menu with the right names. However the computer is not booting from the WIndows disk. I get a message ending with :
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
At which point it take me to the Boot Menu. I can see the order I have set for Booting is:
1. ATAPI CD: TZSSTcorp CDDVDW TS-L633F
2. ATA HDD: WDC WD10JPVX-22JC3T0
3. PCI LAN: Realtek PXE B03 D00
It seems to me that the system is trying to boot in that order but the CDDVD drive is not responding, the HDD has nothing on it so it goes for the PCI LAN and there is nothing for it to do so it returns the error an sends me back to the Boot Menu.
View 2 Replies
View Related
Sep 21, 2014
Lenovo V570, I'm on Windows 7 64-bit.
I have an esata port, and was going to get an internal hard drive with a case that converts the drive into an esata drive. I'm wanting to get a 3 TB drive, and in order to get it to read all 3 TB, I'll need to reformat the drive in GPT format (not MBR). Right?
I see a thing online that says the SATA controller has to be compatible with GPT in order to do this. I want to use it as an external drive, without any operating system on it, so I'm not worried about getting Windows to run on it; just if I can format it as GPT and get the full 3 TB out of the drive. I don't want to buy the 3 TB drive and then find out I can only get 2 because of the motherboard. If that site was correct, then I need to know if the sata controller is compatible with GPT.
I see this listed under the IDE ATA/ATAPI controllers list: Intel Mobile Express Chipset SATA AHCI Controller.
I tried to call Lenovo support but could only tell me that she thinks I have SATA 0 or 1, but nothing about the controller in this model or GTP compatibility.
How do I find this out?
View 7 Replies
View Related
Nov 25, 2008
I just got a new lenove V570 with Freedos and would like to install Windows 7 professional.
When I try to install Windows 7 64 bit, I get the error: The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks?.
View 4 Replies
View Related
Feb 18, 2012
I was wondering if the default Energy Management battery setting of 50% can be changed on the Lenovo V570. I keep the laptop plugged in almost all of the time, and the popup suggests using the setting that keeps the battery at 50% all the time. That's fine in terms of not over stressing the battery, but if I need to unplug the laptop, I'd rather have a fuller charge than only 50%. I'd read that ThinkPads can be set to 90% or other settings. Is that possible with the V570?
View 9 Replies
View Related
Oct 16, 2012
So like many V570 owners I encountered the same problem where the laptop does not turn on anymore. I'm not on warranty anymore so I couldn't send it in to Lenovo either. Based on what I read, this issue appears when the laptop goes to sleep (closing down the lid when the laptop is on, or letting the laptop sleep when you're not using it for a while).
So I was thinking, "Hmm it doesn't make sense to replace the motherboard just because the hard drive is on sleep". Why not just pull out the hard drive and memory cards and put it back in? So I unscrewed the smaller cover on the back of the laptop and unscrewed the hard drive (one screw), pulled out the hard drive (slide it backwards and pull out) and also pulled out the two memory cards (that are on the right side).
Then I simply put the hard drive back in and the memory cards back in place. Screwed the cover back on there and it TURNED ON!
First thing I did after that was go into the Power Options in Windows 7 (just search "Power Options" from the start menu) and went to "Choose what closing the lid does" and changed all the selections that said "Sleep" or "Hibernate" to either "Shutdown or Do Nothing".
NOTE: The down side is that you probably can't Sleep or Hibernate your laptop anymore. I'm trying to see if there's a BIOS update for this but the Lenovo Support website is not loading at the moment.
The UPSIDE is your laptop WORKS and you're not gonna be spending $$$ for an unecessary "motherboard' that they say they'll replace.
View 2 Replies
View Related
May 8, 2014
I updated LENOVO V570 to win8.1, every thing looks good except the unknown device question mark in device manager.
It looks come from the power manager driver, because in the message center, it is said, power management does not work with a compatabale problem.
View 7 Replies
View Related
Jan 28, 2013
I am having 2 problems with networking on my v570. When hard-wire connected to a time warner arris modem, the computer sometimes recognizes the network but does not get internet access.
When connected to an airport extreme via the same modem, it connects to the internet but speeds are drastically low. when I hardwire connect a mac to the modem, it's blazing fast.
Something seems to be wrong with the connectivity [URL] .....
View 6 Replies
View Related
Dec 10, 2013
V570 1066 no longer sees 1tb WD Passport HDD in Explorer. it simply lists it as Local drive E: and doesn't allow access. The drive works fine on another laptop.
Running W7 w/ SP1.
IE 11.0.9600
View 2 Replies
View Related
Sep 25, 2011
I reinstalled windows the other day on my V570. Everything is working great except the wireless drivers which i cannot install. In my device manager under other devices, i get an unknown network controller.
I have downloaded and tried installing all of the drivers from the lenovo site as well as tried scanning on the Intel site. i will get the dreaded "no matched wireless" pop up.
I am using Windows 7 home premium which is what came on the machine.
View 4 Replies
View Related
Nov 14, 2011
I have recently purchased a Lenovo V570 From Best Buy with an i5 2410m and Intel HD 3000. When browsing the web, I came across the option for the V570 to have a dedicated Nvidia 525m Graphics Card.
View 3 Replies
View Related
Jul 9, 2011
V570 - works great! Upgraded to Win8 but had probs with it so did a "refresh" and that pretty much cleared it up.Bored so got a Sammy 840Pro SSD. Cloned with stand-alone Acronis Trueimage 2013. Boots and works fine. Had the SSD plugged to the eSATA.Then I noticed that on cold startup, it was not giving me the BIOS options of F2 and F12, and pressing them did nothing - it just booted up Win. Did a lot of googling at this point but no joy.I then noticed that on a restart from Win8 , it DID give me the BIOS options and I could get into the BIOS. But that's a dicey way to run!!! I early on (a year ago) found that you cannot re-order the devices in BIOS - it resets them to what it wants. (latest BIOS 44CN36WW which is 43 - an old one)
Okay, so boot order is SATA port specific, I put my second HD into the primary position and hung the SSD off the eSATA cable. It insisted that the SSD was bootable device 8 (LOL) and tried very hard to boot from the Realtek LAN port. However it WAS giving me the BIOS options so I could hit F12 and choose the SSD and boot into windows. I also found that if I pulled the RJ45 before I hit power, it would try the Realtek, but then bounce to the list of devices - choose the SSD, and boot into windows.I moved the SSD to the DVD port (I had an adapter), but exact same thing - still calls it 8.So it works and is a good deal faster than the original Toshiba drive which did 90MB read. But there is that unfortunate pause in my 10-15 sec win boot!
View 4 Replies
View Related
Oct 26, 2012
I just upgraded to windows 8 pro x64 on my Lenovo V570 and it can't find the driver for my built in webcam. My girlfriend is moving away for 6 months starting next week and the webcam is really important for us to stay in touch.
View 9 Replies
View Related
Dec 14, 2014
While attempting a recovery with a copy of the recovery partition as provided by Lenovo, I receive: "Windows cannot find a system image on this computer".
I have both the Lenovo recovery partition on the HDD that came inside the laptop (15.56GB, PBR_DRV) and a copy of it on an external USB HDD (booted from it!). Why can't the recovery software find it?
Where is that "System Image"?
View 9 Replies
View Related
Mar 12, 2013
I have an annoying problem with a Dell 15R-5521 Windows 8 laptop. I tried to do a factory image system recovery via the pre-installed "Dell Backup and Recovery" application. It indicated that the machine would be restarted, however it simply booted back into Windows, as per a normal reboot. I tried this several times, with the same result each time.
I had previously created recovery media on a 16GB USB flash drive, so booted it from this instead. I chose the "Factory Recovery - Deletes data & resets all partitions" option. The process completed successfully, and everything appeared to be fine, however when I looked at the System Protection tab I saw the following.
Protection Settings Available Drives Protection OS (C:) (System) Off?Volume{da47ae8b-20ce-4f8a-8... OffOC (C:) (Missing) On
I've Googled but I can't find anything about this anywhere.
View 3 Replies
View Related
Feb 3, 2011
My x220 is driving me crazy these days. Some days ago I experienced very strange behavior of my system. I was just using the notebook as always as it started to stutter.
With stuttering I mean everything is working for 1-2 seconds then is stuck for 1-2 seconds, working, stuck, working so on so forth.
With everything I mean the mouse movement, hard disk load, graphics movement, audio, everything simultaneously. This problem does show up not only if Windows is up but also when Windows is booting or if I start a live linux distribution.
I also noticed that sometimes when I'm moving around the ultranav trackpoint the cursor jumps to one display edge and opens a context window as if I had pressed the right mouse button.
What I did so far:
Reboot my system several times.
Checked Task-Manager: nothing out of the ordinary
Reset BIOS to factory settings
Updated everything to newest stuff
Started a live Linux distribution instead of Windows 7
Decrypted my system (TrueCrypt)
Deactivated Power Management/SpeedStep via BIOS settings
Switched to Single-Core processing via BIOS settings
Swapping RAM from 2x8GB CORSAIR to 2x4GB KINGSTON
Swapped SSD with original HDD
Try booting windows in safe mode
I'm almost at a point to say this can't be a software issue and that it is something mainboard/CPU/GPU related, but I want to be certain before contacting the support.
Another thing I noticed: The stuttering starts exactly when the windows logo shows up and the screen automatically dimmes itself while starting windows. Something is happening in that moment. I may need to add that I did not install anything prior to the current situation. That does support the hardware relation.
Lenovo X220 (Model: 4290-G51) | Intel Core i7 2460M | Intel HD 3000 | 2 x 8 GB CORSAIR DDR3-1333 RAM | 256GB SAMSUNG 840 Basic SSD | 9-Cell orig. Lenovo Battery 29++ (FRU: 42T4942, LGC) | BIOS V1.29 | Power Manager V6.65.1 | Power Management Driver V1.67.04.05 | Windows 7 Professional 64Bit (up-to-date)
View 6 Replies
View Related
May 11, 2009
I'm getting a strange problem on my dv6500t with my dual booted Windows 7 RC install (same issue with the Beta). My searches have been inconclusive.
Using W7 as one user is fine, but if I leave one user logged in and switch user accounts, things start acting wierd...Anti-virus fails to start (I've uninstalled AV and the rest still occur)Can't use the IE button on the task barIE doesn't log in to some websites (e.g. AOL mail)slowness Lots of permanent window and menu artifact ghosting that only clears after logging out This only happens when 2 users are logged in at one time... one user works just dandy.
I'm just suspicious of my HP... the friggen thing crashes on me enough or doesn't resume from hibernate/sleep so I'm not confident in the crap.
View 5 Replies
View Related
Feb 12, 2014
I have an Ideapad Y510P with 24G SSD and Windows 8.1. I uninstalled the Express cache by a mistake. So I want to re-install it. Unfortunately, the install program told me that I need to reboot the system even I tried to reboot or shut down the system several time.
View 4 Replies
View Related
Nov 13, 2013
I have a new Edge 531 just upgraded to Win 8.1. The Lenovo Solution Center gives me a Virus Protection Alert - even though Norton says all is OK. When i click to enable anti-virus in the Solution Center, nothing happens. How do I cancel the message?
View 3 Replies
View Related
Jul 25, 2012
I have a brand new E530 with 16 GB SSD. Product Code: 3259A29.
I installed the ExpressCache with the installer at C:SWTOOLSAPPSExpressCache. All went well and the machine ran faster, for a day.
Now I updated the Harddisk Protection, as recommended by the ThinkVantage System Update to Version 1.77.0.5.
Since this I get an error message at boot time: "2102: Detection Error on HDD2 (Mini SATA). Press ESC to continue." After ESC the machine boots.
But ExpressCache is not working any more. At the command line the command eccmd.exe -info says "**ERROR** ECCmd Requested device is not available : 2."
I suppose, that the update of HD-protection ruined the ExpressCache - cache.
How can I fix ExxpressCache? To any options of eccmd.exe it returns the above error message.
View 8 Replies
View Related
Jul 23, 2013
I have a Lenovo P580 that I put a Samsung Evo 840 SSD in. The system seems to always run hot, the fan runs high and I'm not sure why.
Right now the at 205 degrees, the moterhboard at 209 degrees, and the SSD at 133 degrees.
I leave the laptop on most of te time, but during the night when t is idel, it still runs hot and the fan runs loud. I'm using anywhere between 60-100% of my CPU, and the major programs sucking resources are MS Security Essentials, OneDrive, and CrashPlan.
I do have an external hard drive attached for extra data storage. Is the system jacked up? The laptop sits on a desk all day, so there is no issues with exhaust.
View 2 Replies
View Related
May 5, 2014
I have a Lenovo Ideapad p500 Touch. I recently upgraded my router to an AC1900 Router, and with it i wanted to update the internal wifi on the Lenovo. I purchased an Intel 7260 AC Dual Band with Bluetooth seen HERE . Install was pretty straight forward, seeing how im a IT Tech. Where I had an issue is with the drivers and getting bluetooth properly set up. The wifi part works without an issue. I can't seem to get bluetooth to work at all. When i go to device manager I see bluetooth but only if I select to view "hidden Devices". Im running Win 8.1 64x, Ive tried installing the drivers from intel, but it never seems to actually install the bluetooth driver. I don't get the icon in the system tray.
View 5 Replies
View Related
Aug 30, 2013
I have a machine (used for creating master images) with all the drivers loaded. I perform a last CloneZilla image (before doing the sysprep). When I restore the image (to the same machine) the Ricoh Card reader has status of Base System Device under Other Devices. I have tried reapply the drivers, deleting the device with drivers and rebooting so that the machine can redetect the device. No luck, just stays at Base System Device.
View 3 Replies
View Related
Jun 14, 2014
I have a thinkpad W500 and I'm reinstalling Windows 7 after years of running linux (I got tired of my video drivers being unsupported due to the age of the card). However, when I attempt to install system update, I get the message "an error occured while gathering user information" and I cannot continue. How can I get the switchable graphics, power, and keyboard drivers properly installed? I don't really care about the rest of the software, it just that system update is the only way I know of to get it.
View 2 Replies
View Related
Jul 17, 2013
I messed up with my Ideapad Y500 system. And as a result I lost my genuine operating system that was provided with the notebook. I had backed up all the important data. The problem is that which version of windows I should install inoderd to use my original key which is saved in the bios. I tried to install Window 8 x64 version. But my key didn't work. Now I am using an evaluation version of windows. The Original windows was Windows 8 x64 single language. Where can I get this OS.
View 6 Replies
View Related
Jan 23, 2014
How can I use the SIM with X1 Carbon?
I inserted the the micro sim but the system did not recognized it. Do I need anything else? Even there is no tool to run broadand/internet. The SIM works fine in the cell phone.
View 5 Replies
View Related
Feb 8, 2014
I got this base system device error in my device manager. I have installed X1 Ricoh multicard reader but still can't solve it.
My machine is X1-3444-BDU, Win 7 pro 64bit.
View 5 Replies
View Related
