Lenovo C/E/K/M/N/V Series :: Battery Settings On V570?
Feb 18, 2012
I was wondering if the default Energy Management battery setting of 50% can be changed on the Lenovo V570. I keep the laptop plugged in almost all of the time, and the popup suggests using the setting that keeps the battery at 50% all the time. That's fine in terms of not over stressing the battery, but if I need to unplug the laptop, I'd rather have a fuller charge than only 50%. I'd read that ThinkPads can be set to 90% or other settings. Is that possible with the V570?
View 9 Replies
ADVERTISEMENT
Nov 4, 2012
I bought a new Lenovo Z580 this past June. Shortly after I began using it, a system message popped up explaining to me that since I often have my laptop plugged in, it would conserve battery life if I let the system change my settings so that the battery didn't fully charge -- this would save battery life over the longterm and I would be free to change the setting whenever I wanted to. Well, this has been the biggest mistake ever. I now essentially have a desktop because I cannot find any setting that allows me to change the battery to fully charge (it only charges to 40 or 50%). There isn't any mention of this feature in the user guide materials that I can find and none of the Power Options allow me to change the battery charge capacity.
View 7 Replies
View Related
Sep 21, 2014
Lenovo V570, I'm on Windows 7 64-bit.
I have an esata port, and was going to get an internal hard drive with a case that converts the drive into an esata drive. I'm wanting to get a 3 TB drive, and in order to get it to read all 3 TB, I'll need to reformat the drive in GPT format (not MBR). Right?
I see a thing online that says the SATA controller has to be compatible with GPT in order to do this. I want to use it as an external drive, without any operating system on it, so I'm not worried about getting Windows to run on it; just if I can format it as GPT and get the full 3 TB out of the drive. I don't want to buy the 3 TB drive and then find out I can only get 2 because of the motherboard. If that site was correct, then I need to know if the sata controller is compatible with GPT.
I see this listed under the IDE ATA/ATAPI controllers list: Intel Mobile Express Chipset SATA AHCI Controller.
I tried to call Lenovo support but could only tell me that she thinks I have SATA 0 or 1, but nothing about the controller in this model or GTP compatibility.
How do I find this out?
View 7 Replies
View Related
Nov 25, 2008
I just got a new lenove V570 with Freedos and would like to install Windows 7 professional.
When I try to install Windows 7 64 bit, I get the error: The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks?.
View 4 Replies
View Related
Oct 16, 2012
So like many V570 owners I encountered the same problem where the laptop does not turn on anymore. I'm not on warranty anymore so I couldn't send it in to Lenovo either. Based on what I read, this issue appears when the laptop goes to sleep (closing down the lid when the laptop is on, or letting the laptop sleep when you're not using it for a while).
So I was thinking, "Hmm it doesn't make sense to replace the motherboard just because the hard drive is on sleep". Why not just pull out the hard drive and memory cards and put it back in? So I unscrewed the smaller cover on the back of the laptop and unscrewed the hard drive (one screw), pulled out the hard drive (slide it backwards and pull out) and also pulled out the two memory cards (that are on the right side).
Then I simply put the hard drive back in and the memory cards back in place. Screwed the cover back on there and it TURNED ON!
First thing I did after that was go into the Power Options in Windows 7 (just search "Power Options" from the start menu) and went to "Choose what closing the lid does" and changed all the selections that said "Sleep" or "Hibernate" to either "Shutdown or Do Nothing".
NOTE: The down side is that you probably can't Sleep or Hibernate your laptop anymore. I'm trying to see if there's a BIOS update for this but the Lenovo Support website is not loading at the moment.
The UPSIDE is your laptop WORKS and you're not gonna be spending $$$ for an unecessary "motherboard' that they say they'll replace.
View 2 Replies
View Related
May 8, 2014
I updated LENOVO V570 to win8.1, every thing looks good except the unknown device question mark in device manager.
It looks come from the power manager driver, because in the message center, it is said, power management does not work with a compatabale problem.
View 7 Replies
View Related
Jun 30, 2011
On my old W520, it had a setting for making the battery last as long as possible. E.g. it didnt charge it to 100%.In my W530, which has windows 8, I can find no such option. In fact, all the Lenovo tools which came with the W520 dont seem to exist on the W530 (eiter because they dont have them for Windows 8, or they dont have them for the W530, dont know which).
The only lenovo tools I have are th "solution senter" from red icon in the task bar (which has a battery icon, but the only thing it does is say "batter is in good condition", there are no options or settings, and the thinkVantage button, which just brings up somehting like some shortcuts to control panel items - no Lenovo tools (just things like update drivers, warranty infomration, keyboard settings etc).
In the wiondows control panel itslef, are just: lenovo system healthlenovo update drivers 32bit (I never use this as I have 64 bit)Lenovo airbag protectionLenovo microphone muteIn control panel -> Power options is nothing Lenovo specific, and no lifespan mode, it only allows you to set when windows switches stuff off.
What happened to all the tools which came with windows 7, including the thing which told you how fast the processor was running, the thing to change your printer etc. with different locations?
View 7 Replies
View Related
Dec 1, 2012
I have a Thinkpad Twist and after updating the Lenovo Settings Dependency Package to 1.3.0.24, I no longer have the 'Automatically optimize for battery life' option in the Lenovo Settings app, i.e., the battery is always fully charged.
I would like to use the battery optimization option, how do I get this function back?
View 5 Replies
View Related
Dec 17, 2013
The other day I tried gaming while on battery and got terrible frame rates. I had the power settings on Maximum Performance. Are there other settings I am missing?
View 8 Replies
View Related
Jan 28, 2013
I am having 2 problems with networking on my v570. When hard-wire connected to a time warner arris modem, the computer sometimes recognizes the network but does not get internet access.
When connected to an airport extreme via the same modem, it connects to the internet but speeds are drastically low. when I hardwire connect a mac to the modem, it's blazing fast.
Something seems to be wrong with the connectivity [URL] .....
View 6 Replies
View Related
Dec 10, 2013
V570 1066 no longer sees 1tb WD Passport HDD in Explorer. it simply lists it as Local drive E: and doesn't allow access. The drive works fine on another laptop.
Running W7 w/ SP1.
IE 11.0.9600
View 2 Replies
View Related
Sep 25, 2011
I reinstalled windows the other day on my V570. Everything is working great except the wireless drivers which i cannot install. In my device manager under other devices, i get an unknown network controller.
I have downloaded and tried installing all of the drivers from the lenovo site as well as tried scanning on the Intel site. i will get the dreaded "no matched wireless" pop up.
I am using Windows 7 home premium which is what came on the machine.
View 4 Replies
View Related
Nov 14, 2011
I have recently purchased a Lenovo V570 From Best Buy with an i5 2410m and Intel HD 3000. When browsing the web, I came across the option for the V570 to have a dedicated Nvidia 525m Graphics Card.
View 3 Replies
View Related
Jun 30, 2013
I purchased a refurbished V570 for my son. Just received it the other day. Every time it boots up, the System Preparation Tool 3.1.4 boots up. Whenever I turn the laptop off and start it again, instead of showing the regular Windows 7 start up screen, it has a "Setting up your computer for the first time" (or something like that) screen. Once up and running, the tool pops up again. Windows 7 runs perfectly, no issues, I installed a bunch of things for him, but obviously this tool shouldn't be starting up and the laptop shouldn't be starting with the setup screen every time.
I did some digging around the internet, there is a bunch of info on this, but everything indicates that the Windows installation was not properly finished on my laptop. I went to all the places that are listed to possibly remove the tool, but can't find any references except a bunch in the registry which I don't really want to mess with on a "new" computer.
View 3 Replies
View Related
Nov 22, 2014
I have an IdeaPad V570 that experienced a total hard drive failure (be careful how hard to close the laptop in frustration) I had Best Buy try to recover data and opted not to pay for the recovery after the only crucial data did not seem to have been recovered. Best Buy told me the rest of the system seems to be intact so they could install a new Hard Drive if I wanted it back. They made me offers to completely restore the system at a price but I decided to save money thinking I should be able to restore the system myself. So they installed the hard drive and that was it.
I decided to go with Windows 8 after learning that support was beginning to wain for Windows 7. I purchased the OS from Best Buy and I am attempting to install it. So far that is not going well. The BIOS sees the CDDVDW drive and the HDD, both are listed in the BOOT menu with the right names. However the computer is not booting from the WIndows disk. I get a message ending with :
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM
At which point it take me to the Boot Menu. I can see the order I have set for Booting is:
1. ATAPI CD: TZSSTcorp CDDVDW TS-L633F
2. ATA HDD: WDC WD10JPVX-22JC3T0
3. PCI LAN: Realtek PXE B03 D00
It seems to me that the system is trying to boot in that order but the CDDVD drive is not responding, the HDD has nothing on it so it goes for the PCI LAN and there is nothing for it to do so it returns the error an sends me back to the Boot Menu.
View 2 Replies
View Related
Jul 9, 2011
V570 - works great! Upgraded to Win8 but had probs with it so did a "refresh" and that pretty much cleared it up.Bored so got a Sammy 840Pro SSD. Cloned with stand-alone Acronis Trueimage 2013. Boots and works fine. Had the SSD plugged to the eSATA.Then I noticed that on cold startup, it was not giving me the BIOS options of F2 and F12, and pressing them did nothing - it just booted up Win. Did a lot of googling at this point but no joy.I then noticed that on a restart from Win8 , it DID give me the BIOS options and I could get into the BIOS. But that's a dicey way to run!!! I early on (a year ago) found that you cannot re-order the devices in BIOS - it resets them to what it wants. (latest BIOS 44CN36WW which is 43 - an old one)
Okay, so boot order is SATA port specific, I put my second HD into the primary position and hung the SSD off the eSATA cable. It insisted that the SSD was bootable device 8 (LOL) and tried very hard to boot from the Realtek LAN port. However it WAS giving me the BIOS options so I could hit F12 and choose the SSD and boot into windows. I also found that if I pulled the RJ45 before I hit power, it would try the Realtek, but then bounce to the list of devices - choose the SSD, and boot into windows.I moved the SSD to the DVD port (I had an adapter), but exact same thing - still calls it 8.So it works and is a good deal faster than the original Toshiba drive which did 90MB read. But there is that unfortunate pause in my 10-15 sec win boot!
View 4 Replies
View Related
Feb 28, 2013
I was trying to find the Active Protection System software for Win8 for while now, it's just not coming up anywhere. I really need to disable the disc freezing feature on my V570 cause it's super annoying (especially when watching videos).
Whether the software is available? I've tried the Win7 version, but there are some compatibility issues, so it doesn't work....
Also, if the software is not available yet for Win8, are there other ways of turning this thing off (BIOS, registry)???
View 2 Replies
View Related
Oct 26, 2012
I just upgraded to windows 8 pro x64 on my Lenovo V570 and it can't find the driver for my built in webcam. My girlfriend is moving away for 6 months starting next week and the webcam is really important for us to stay in touch.
View 9 Replies
View Related
Jul 27, 2013
Lenovo settings on my X1 Carbon 3444CTO, bought January 2013, will not finish. I have staring at spinning dots for two days now.
View 9 Replies
View Related
Mar 24, 2014
I bought a y400 in feb 2013 and it worked perfectly. Then i faced some SSD issues and the system would hang and needed to force restart .I had to install Ubuntu to work.. I sent it back in feb'14 under warranty and they replaced motherboard ,SSD , HDD , re imaged ,etc . Now i got it back and everything seemed to be ok but was facing display driver issues (tried everything to fix this) and ended up disabling my graphic card to make the system work seamlessly .
Having read on internet somewhere that windows 8.1 may fix the dispaly driver issue , I upgraded to 8.1 from the windows store . After downloading the update I had to restart to install windows 8.1 and it was stuck at 49 % at setting up on lenovo logo screen for about 2 hrs and I had to force shutdown.
After starting up again as expected it crashed. Now I cannot Safeboot nor can I use OKR .
After the booting up its landing lenovo logo screen for a while then jumping to select language screen ENGLISH US -> Advanced Options -> cannot find startup settings (to safe boot) any option i select for example system restore it then asks me for windows 8 setup or windows 8 OS when i select any one of them it hangs (blue screen)
Same happens when i use OKR .It loads the files and then boots to the same language screen . Since Recovery image is stored on separate drive all I need to do is format the C drive but how can I do it ?
View 6 Replies
View Related
May 5, 2014
My laptop at frst 3 drives on it. One around 1TB and the other two each 1GB. It had one key recovery functionality. I formatted, deleted and then created one big drive and then spilt that into three drives.
Now I want the one key recovert back along side those 2 drives which each was 1GB.
How can I do that?
View 5 Replies
View Related
Nov 16, 2014
I cant find equalizer settings in windows.
Two days earlier I replaced 16Gb SSD with new 120GB SSD, reinstall system, install latest realtek audio drivers. After this I cant change settings of audio effects.
View 2 Replies
View Related
Feb 4, 2012
I think when I set up this computer I selected that it always maintain the wifi connection. Normally this is fine, but if I am installing a program I may not want the computer to connect to the internet.
I recently clicked on the wifi icon in systray and right-clicked on my connection and selected "disconnect". It did, but it immediately reconnected. Where is the setting where I can control this?
View 3 Replies
View Related
Mar 29, 2014
I am unable to enter Bios settings on z580 with windows 8.1. I have tried everything including holding shift with shutdown and accsesing bios within windows, nothing seems to work and windows just strarts up normally. I also can't find a update to fix this problem.
View 8 Replies
View Related
Oct 10, 2014
I was able to launch the adaptive keyboard settings by pressing the 'wheel' button on the bar.
I updated the newest version of the keyboard settings (Hotkey Features Integration for Windows 7 (32-bit, 64-bit) - ThinkPad).
After installation. I could not use the functionality to switch through the different functions. I learned on this forum it had to do with the power management software. So I downloaded this.
De-installed the adaptive keyboard settings. Installed it again with latest version.
Now it works again, but now I can not launch the settings anymore. Not via the wheel button on the adaptive keyboard (most right button with the F1, F1 functions). Also not able to launch it directly from the control panel. Link is there, but there is no reaction.
So now I am not able to customize the settings anymore.
View 9 Replies
View Related
Jun 25, 2014
I have a new Flex 14. When I turn it on, I frequently get the following message "The battery is charged to a high capacity. Staying above 70% of capacity for a long period of time is adverse to the battery health. Enable 'Conservation Mode' in Settings." I can not find "Conservation Mode" in "Settings." ?
View 5 Replies
View Related
Oct 10, 2014
I just flashed BIOS on my thinkpad yoga 20CD00B1US. I got the lates BIOS 1.18/1,09 and sice this flash, I cannot make any changes in BIOS. I can list in BIOS but cannot highlite and change any setting expect quick boot Enabled/Disabled
My even manager is reporting me this warrining: : The embedded controller (EC) returned data when none was requested. The BIOS might be trying to access the EC without synchronizing with the operating system. This data will be ignored. No further action is necessary; however, you should check with your computer manufacturer for an upgraded BIOS.
I do have set up supervisor password for BIOS, password on power on. When going in BIOS, I am not asked to put password in, which could be the issue.
View 1 Replies
View Related
Feb 25, 2014
In the process of setting up my new X1, when I try to configure the cloud settings for adaptive keyboard, it states that there are no supported cloud applications installed.
I have the new OneDrive app installed. How to get this setup working? I'm thinking that with the name change from skydrive to onedrive that the settings are confused.
I'm running factory installed Win7-64.
View 9 Replies
View Related
Mar 12, 2014
I have a Lenovo Thinkpad X40 - 2371 that I would like to reset to its original Factory Settings. It does not have a CD-ROM drive so I can not use a Recovery CD. Its operating system is Windows XP Professional. I have tried to use the "Access IBM" and the "F11" buttons to see if I can find any Factory Restore option, but there is none.
View 4 Replies
View Related
May 14, 2010
(There is another thread on this, but it relates to Windows 8. I am running Win 7 Pro 64 bit.)
I have a Thinkpad X1 Carbon type 3443-CTO. The Wi-Fi adapter -- never the stablest thing on earth -- is getting flakier and flakier. I am constantly having to reset or disable/re-enable it. The "connect automatically" settings for some of my existing Wi-Fi routers do not appear, so that I have to connect manually every time.
View 6 Replies
View Related
