My current CPU temp is around 61 degrees C with the CPU load @ 100%. I clean it petty often and I just recently (around 2 months ago) applied silver compound to the heatsink. Even though the fan is on, how come it will not go faster than "slow"? I can set it to high, but why doesn't it do it automatically? Is this normal for my 9300?
Setup 6930G, T6400, 9600M GT, 4GB Ram. Temperatures for general internet use, although this does depend on the amount of graphics and flash content of the web page (Vista SP2 - Balanced Power)
HWMonitor 1.15 CPU 54 to 58 - (T6400) GPU 59 to 65 - (9600M GT)
Nvidia System Tools 6.05 (November Release) CPU 58 to 62 - (T6400) GPU 59 to 65 - (9600M GT)
Does the T6400 appear to be high? My friends P7350 reads around 30. Also Note the difference between System Tools and HWMonitor for CPU. For Windows 7 my GPU runs with a lower end on the range (Windows 7 - 9600M GT GPU = 54 to 65).
Note Also - Running the 9600M GT GPU flat out (100% usage) using Nvidia CUDA to encode HD video the 9600M GT GPU hits a maximum of 67 (according to GPU-Z 0.38, HWMonitor and Nvidia System Tools).
What do people think and what temps are you getting?
Basically I've been messing around with the OCing of my CPU since I've finally got all my temperature issues sorted. Firstly, I notice that my CPU temps at times are erratic, jumping/falling up to 10C at a time. Is this normal?
Secondly, my CPU temps after a short gaming session were CPU1: 66C/ CPU2: 80C This seems a bit strange to me. Does anyone know why CPU2 might be so much warmer?
Thirdly, related to the above, is 80C @ 3.4GHz good, bad or average? If I was running at 80C for hours can I expect this to do any damage? I know the CPU can handle up to 105C, however that doesn't mean something below can't cause damage. Confirmation on this would be great :-)
I have had my XPS M1530 for about 13 months now, never had a problem with it so far, however I am getting a little worried about some of the temperatures over the past few days.
I have been playing Fallout 3 and Anno 1404 a fair amount for the past week or two everything seems good, however my temperatures seem to be getting a fair bit higher than they were a couple of months back (May-ish) when I last spent a good amount of time looking at temperatures.
For example I played Anno1404 for about 3 hours on Saturday followed by 4 hours of Fallout 3 and the CPUs got to the high 80s and the GPU touched 95C! THM_ (from HWMonitor) hit 100C!
Now obviously I'm a little worried, it was pretty warm when I was playing (25C), but the thing that baffles me the most is that this has only been happening over the past week or so, before then my CPU rarely broke 80C and the GPU 85C. There also seems to be a loudish 'click' from the HDD when I turn off the laptop when it has been on for a fair while, again, this has only happened over the past few days.
I do have a question about the CPU temperature. I'm using CPUID HArdware Monitor (under 32bit Vista)to monitor the temperature and I am pretty concerned about constantly working fan (even when the cpu temperature is under 50 C).
The threshold under which the system goes dead silent is 44-46 C. Is that normal?
I`ve bought a M1530 in december, it was fine till february when the termal paste had become bad the temps were at about 50 C idle and 80 on load, I replaced it with MX2 Arcgic Cooling and went 8-10 C lower. But Everest and other software detect AUX Temp?
Idle 60- on load 100C and the temp from 100C drops down in a seconds to 60C when I switch from Counter-Strike to Desktop. My question is what is this AUX and should I be worried. It looks like a component with bad cooling.
I'm in a bit of a jiffie, my 1330 had some problems with overheating so I formatted but it turned out it was a piece of dirt stuck in the fan, anyways problem solved.
Now, I get the slowdowns again, albeit not that severe. Now, when I open hwmonitor it only shows my CPU, HDD and ACHP. The GPUs temp won't show up.
I installed ntune, nada, same thing. What could be the problem, is the temperature measuring thingy broken I'm kind of worried that my 8400m gs is dying on me since it was a pos to begin with but I really dont feel like sending in my laptop.
This is probably the one hundred and second thread on this subject, but after searching for similar threads, I just couldn't get a straight answer.
The temperature of my Geforce Go 7950 GTX reaches almost 100 degress celsius (97 to be exactly, but I'm pretty sure if I let the stress-test run for a couple of more minutes it'll get that hot).
I don't have a problem with this, but since this is my second videocard (the first one died after three years, I guess due to overheating issues), I would like to know if I may expect this to happen again.
So, for all of the M1710 owners out here: what are your GPU temperatures after stressing it for, let's say 10 minutes, with Furmark (stresses your GPU really really hard)?
Please mention them in celsius, and with what program you read out the temps (some programs, like i8kfanGUI deducts 8 degrees of the real temperature).
The temperature of the processor goes up over 80'c when I do intensive things, like MP3 encoding or Half Life 2.
The CPU in my TX2 is a Turion X2 RM-72. So what I am wondering, is what is the thermal design of this processor? The processor in my Asus (Core 2 Duo) only hits about 60'C when under extreme load. Main thing I am asking is, is it safe to run the processor under such load? I mean the Turion X2.
It makes me very nervous to see such high temperatures, even when at idle its 47'C.
One thing that just came to mind, is the possibility of the location of the thermistor. I suppose if its located closer to the core it could read much higher, faster. Only thing I'm thinking about, is eventually the temperature should read higher anyway if that is the case. Over time the cooling system would gradually become warmer.
Anyway, all I'm wondering is is it safe? Idle temperature seems pretty normal to me, 47'c, but 80'c is quite high for load temperature.
it is indeed handy to have coolbook on the menu bar and it shows that at the time when temperature went up to 80~90; the cpu was running at full speed.
at the task i was running where i underclock down to even 800mhz things were fine, but it just shot up to 2.5k ghz for no reason.
and after locking at the range of 800-1600, the temperature did indeed dropped to a more desirable temperature of 60 but still sticked to the upper limit at 1600 w/out reason.
all temperatures stated are Celsius. there weren't any cpu intensive tasks running either; once again, i turned off everything after seeing the temperature went up. since it has nothing to do with the GPU(every unibody mac user love to say this, but no, not the gpu this time.
for those who didn't know what happened prior; my macbook pro loves heat and more so reaching 80~90 w/out reason. venting is clean enough there is no visible dust gathered, it had been used with a cooler at home so it wouldn't be the entrapment from desktop material either.
What is the safe operating temperature for my notebook? ¬†At what temperature can I expect the system to slowdow (as self-protection)? ¬†Does that temperature suggest I need to open up the laptop and clean it? ¬† I checked the Intel website, but they don't include a useful temperature number for this model, that is no "case temp #", the only number is the tJunction, which is 105 Celcius, which must be meltdown temperature. ¬† I've had some unusual behavior at much lower temperatures. ¬†Including image of temperature diagnostic tools with must-be-bad-flame symbol. ¬†I read on en.kioskea.net that safe temp for i5 is 70 celcius, and 100 for latops - that's really hot. ¬† [URL]....
So I know this program basically tortures your graphics card but how hot should it get on a stability test in 'Xtreme Burning Mode'? I just had my motherboard/GPU replaced so I am running some tests. After a few minutes of this test it reaches 90 degrees celcius. Isnt that crazy hot?
can some 1 tell me wts the temperature for the M1710 with 512 MB 7950 GTX please ,,cause i just upgrade to it and i dont now whts gonna be and please tell me which program (am using 2 programs I8KfanGUI and NVTemplogger)
I have problem with my Dell M4400 it very hot (CPU temp ~ 50C), my system - Q9100, FX770 etc. I think have problem with heatsink systems. What I do? Perhaps, some people have Portable M4400 with CUP like me (Q9100 or QX9300). If some people have this CPU help me, please. Which serial number heatsink you have in your portable systems with CPU Q9100 or QX9300. I must change it but I don`t know serial number.
this isnt 1 of those heat issue threads, im just looking for advice. Just want to say i love the notebook and would like to take care of it.
i do mostly surfing, chatting and tunes but theres also work and gaming. Regular temps run around 50c and im not to worried about that. during work (but mostly gaming) it goes up to 68c. This is all with a cooling pad and mini fan blowing at it .....
It seems that everybody who owns an XPS M1530 has an extremely varied set of temperatures for their GPU and CPU. Now, I am a complete freak about my temps, constantly checking them and always worried they are too high. I scour the notebook review pages looking for a benchmark set of temps, but everyone either has overheating problems warranting a nice replacement (CPU 80+ GPU 90+), or they have chilled out systems that sound very cool (CPU< 69 GPU
TEMPERATURES - CPU Min/Max Idle - GPU Min/Max Idle
- CPU Min/Max Load (running ORTHOS, which can be downloaded here: [url] - GPU Min/Max Load ( running rthdribl, which can be downloaded here: [url]
- Whether you were watching your temperatures in real time, or relied on a temperature report. (I suggest everyone does both and reports both results)
SOFTWARE - The program you used to get these readings (I suggest everyone uses the latest version of HWMoniter) - Power Setting in Vista (I suggest everyone uses High Performance) - Bios Revision (I suggest people use the latest revision) - Video Driver Version (Found in system information in the Nvidia control panel, state wether it is a modded, Dell M1530 or Dell non-M1530 driver)
SYSTEM: - CPU Model and Speed (Txxxx, xGHz) - Hard Drive Speed - GPU Clock ("stock" otherwise write your clock speeds) - 9v or 6v battery
Physical Ajustments - Notebook Cooler (if yes, then write the model) - Thermal Paste (if yes, what type?) - Airflow and Surface (What type of surface is the laptop on? Have you propped it up to simulate a 9v battery? How high?) - Ambient Room Temperature (If you can report these in degrees C, otherwise state your location and time of year with a general statement whether it is cold or hot)
I recently received a new m4400 (with a T9400)and had a problem with one of the cpu cores running 6-8 degrees hotter at idle (not under load). When I told this to Dell technical support, they reordered me a new notebook.
Here's the problem... I received my new replacement notebook. Although the cpu cores are now the exact same temperature at idle, once I start running some programs (simulation games, etc.), one of the cpu cores runs 7-8 degrees consistantly hotter than the other one. If I stop playing these games, both cores return to the exact same temperature .....
Lately I've been busy and haven't played a whole lot of games. Just the other week I notice my GPU temps went up on ilde. The fan would kick in ,to stablized the temp around 75 degrees then drop to 60 or so. The temperature just keeps climbing up till it maxed at around 75 degrees.
Iv'e already went and bought some air can blowers and blow all that dust and lints out. I even ensure it's clean by shining a flash light thur the top of the fans and look thur the vents to see if I can see the fan blades. All is clear but I'm still having then same issues. When I ran games such as RE5 it gets really hot sometimes reaching 95 degrees.
My palms sometimes starts to burn anyone encounter such act? Wondering if there's anything else I can do before calling DELL support!