My configuration is with 4GB single slot right now. Considering that an extra 4GB single 1066 DDR3 aftermarket DIMM would cost me about $170, what would I gain by upgrading it to 8GB in total?
View 10 RepliesRegarding the FZ model, what type of RAM stick does it take?
Im not a technology expert but I know there are different types of memory sticks (in terms of the physical size)
I have a VGNSZ645P3 Vaio which I got as xmas gift. I decided to Max out the RAM and purchased Crucial 4GB kit. Sony recommends Crucial as only authorized after market RAM. I have previously upgraded memory on desktops and laptops and am fully aware about the ESD. I changed the memory 45 degree angle, snap it down....I try turning the computer back on and it will not turn on. Power light is on, the battery light is on but the other 3 lights will not light up and screen does not turn on. I put the original back on and it still will not turn on. I took it to sony store and the guy tries same thing I do and it does not work. He says the motherboard is probably toasted...I said how could it be I followed every direction possible and he said sometimes that the Memory has ESD on it. So they put the original factory RAM back in and shipped it out to San Diego. I thought that warranty was void if you mess with original RAM? Im hoping they'll fix whatever that is wrong with it and not come back with "you messed with RAM warranty is void".....
Has this memory issue happened to anyone?
family member install some additional memory in her Sony VAIO laptop, but seem to be having a problem. Its a VGN-C290 model (May 2007) and currently has one 1GB chip installed & has one open slot. It allows a max of 2GB.
Now, I have purchased an additional 1GB chip from Crucial.com, but after installing it in the one open slot, it appears that it is not recognizing it at all. The laptop will turn on, but doesn't get to the XP screen. Not even the Sony VAIO/Phoenix welcome screen either.
I have never had a problem with Crucial memory, but I contacted them directly to maybe help with this problem. They basically told me to make sure it is really seated in there good and apply a lot of pressure. They also had me put the Crucial memory in the slot #1 where the original Sony memory was. Neither worked.
The only other thing they suggested was that it was a BIOS related issue & to somehow update the BIOS. I checked & it currently is running BIOS version #R0080J4. I'm trying to determine if this is the latest version. If not, then how to update it.
While eagerly scouting the Zs, I've greatly enjoyed this forum for the past few weeks. I've been stopping by (ok stalking) my local Sony Style store to check them out in person, and became curious about a discrepancy.
Does anyone know off hand if there is an inherent memory speed or bandwidth difference between the 520m and 540m (or 620m)? I haven't noticed anything official from Intel or the Sony specs, other than they all use DDR3/1066 sticks.
Last week I snapped a picture (rather fuzzy cellphone, sorry) of the WEI screen for the lone silver GX/S (i5-520m) floor model. It shows a lagging score of 5.9 on memory, which doesn't jive with other performance scores mentioned on this forum (that I could find).....
Considering buying a UK spec Vaio FW laptop. How easy is it to upgrade the memory on this?
From 4 to 8 GB. Looking at the spec on the Sony UK site it looks like it's already fitted with 2x2GB RAM
And would either of these brands be compatible? - Crucial.com or Orcalogic.co.uk .....
Sony VAIO W211 comes with 1GB installed with max. upgrade limit of 2GB.
Can someone tell how easy or hard (as in Dell 1010, forget about doing it because you have to disassemble the whole thing) to upgrade the memory on this
what sort of memory should i purchase for the machine? i know it's ddr3 but what pin count?
View 6 Replies View RelatedI just got my brand new Sony Vaio TZ
everything is great till now but i was checking to video card memory and its only showing 64MB ,, its should be 224 according to the specs "i know its 64MB dedicated memory"
i took a look to the BOIS and didn't find any option the increase the memory ,,, so what i have to do to take the full 224MB
I have the VAIO SR190 and want to upgrade to 8GB, but I have seen conflicting information if it will support 8GB.
View 8 Replies View RelatedTrying to get rid of these questionably useful programs -- but I don't see entries for them in add/remove programs in the control panel (or for any of the other useless VAIO software packages that come on OEM machines sans "fresh start")
View 5 Replies View RelatedI want to move my 4GB Z moved to 8GB ... what is the best memory to get for this? Do you guys recommend a source?
View 3 Replies View RelatedAnyone could tell me if this is feasible to be installed on the TZ.
> OSWIN32 >
http://www.fadfusion.com/selection.p...er=10122600671
i'm just wondering why my z's memory usage never go back down, it starts with 800mb, when i watch movie, surf the web, use software like photoshop, winrar...
it goes up to 1.6 or 1.7gb and it stays the same even when i close them all, i did the same thing on my dad's toshiba and it went back to 800mb after closing all the program, both have 3gb memory ddr3
I'm looking at purchasing an FW with only 2g of RAM and upgrading it myself cheaper than I can do buying it from Sony. The RAM from Sony is DDR2-800 PC2-6400. where to buy a couple 4g modules (2x4, 8g total)?
View 3 Replies View Relatedtoday I received new memory and right away decided to do easy task, install it to my VGN-TX51B/B.
It looked easy just until I opened the memory cover and found out there is some kid of mechanism, which I don't know. Nevermind, just slide it there and lightly pressed and it was there, even though not in the way I expected (see red circles)
Turned on, checked in My Computer...and surprise, there's written just 504 MB of RAM. Quick check in SIW and it looks like it's installed properly
I'd like to upgrade my VGN-SR190 memory from 2GB to 4GB. Can anyone recommend a good buy from Newegg (or another site)?
View 3 Replies View RelatedI got a Vaio Z620D, it's a Canadian Model. It's got only 2GB of ram, so I am looking to add 2 more. I was told that it should match the frequency or something like that, I am not too sure about the whole deal.
[url]
Here is the detailed specs for this laptop, just scroll down for the RAM info.
[url]
I would like to extend my latop VPCS111FM to 8 gb of Ram (heavy user of VMware), i can't find any manual for this machine (only a basic quick install came with it and no more is available on the website) - What are the exact specs 4gb ddr3 204 pins but is it 1333 i think probably 1066 ? pc38500? - I open the 2 screws of the memory location but the cover seems stuck, is there any trick to remove it?
View 6 Replies View RelatedA friend just showed me his new Dell Vostro lappy. He has 4 GB of DDR2 800mhz memory on it when compared to my 4 GB of DDR2 667mhz memory on my XPS 1530
However, under his windows experience score - he gets 5.9 score for memory operations while I just get a 5.1. I can't believe that a couple of hundred mhz can result in such a drastic difference.
Is there something optimized for his system but not for mine?
I just purchased a used Elitebook 8540w with i7 quad core and four memory slots (I love it!). It is running 64 bit Windows 7 Professional It came with one 4gb memory module and I purchased an additional 4gb module to bring total RAM to 8gb.
I have the HP document that shows for two 4gb memory modules, one should be in memory slot 1 and the other in memory slot 3 for correct functioning of dual channel memory. All set right?
Not quite. In the Elitebook 8540w, the primary memory slots under the keyboard are clearly labeled "1" and "2" However, the expansion memory slots on the underside of the chassis are also clearly labeled "1" and "2" Opps! There is no "3" and there is no "4" In which of the unfilled three slots do I install the second 4gb module for correct functioning of dual channel memory?
i having the Acer TravelMate 6493, originally it have 2GB of Memory. Recently, i have addin additional 2GB, mean that currently the system is having 4GB of Memory.
in the BIOS, showing the system is installed with 4GB of Memory, but when come into the windows, it show 4GB installed (2.90GB Usable) .....
I have a problem with my FZ21M and need to narrow down the faulty component.
Purchased from amazon uk in feb 08 and have had no problems at all with it.
Haven't used it in a few months and has been safely stored.
Last week I booted it up and all was fine but in the course of installing many microsoft updates it hung and after powering down would not boot into windows.
I used the recovery software and got it back up and running. Checking the hard disk took forever with many errors. Still, seemed ok but then froze again on windows update .....
I have a Sony VGN-NR310E with Windows XP Pro on it. The maximum memory is supposed to be 2gb. But my son showed me tonight with a 2gb chip he had just ordered for his laptop, that my Vaio would recognize 3gb of memory. Windows showed 2.99 My question is, has anyone tried this? If so, will it recognize 4gb? I want to order some memory from new egg but I will wait until I hear from others that have exceeded listed memory limits on this model.
View 10 Replies View RelatedFor few months already I am getting irregular bluescreens announcing "Memory Parity Fail" on my FZ11E.. Most of the time it's when the computer has noticeably warmed up but not always. Sometimes there's no crash for weeks and suddenly it's here again and keep coming back several times per day.
My guess would be the memory gets overheated, probably because I upgraded from 2x512MB to a cheap pair of Corsair's 1GB. However I suspect my computer might have a tendency to get too hot by itself even if I keep it on hard surface and always on a Balanced power plan. Memory tests show no errors so I can't know for sure.
The question is, how do I find out if the problem is in RAM or the cooling system? I'm willing to buy a new pair of memory modules but want to make sure it will fix the issue.
CPU: T7100 @ 1.8GHZ x2
RAM: CORSAIR DDR2 1GBB SODIMM 667MHZ CL5
VIDEO: NVIDIA GEFORCE 8400M GT 64MB
OS: WINDOWS VISTA HOME PREMIUM
i have cs110e, it is showing 128 grafix memory, but i need to play high resolution 3d games, so that i want to share my video memory to 512Mb, i searches all options in BIOS Setup, but not found...
View 10 Replies View RelatedI just bought 2x2GB (DDR2 667MHz) of memory for my VGN-C1Z laptop (unfortunately I did not check before if 2X2GB was supported). Now, as far as I understood the Intel 945PM should support this, but the laptop in itself was said to be 2GB limited.
Using Windows XPPsp3 with those 2X2GB success to boot but at the end I got black screen (I see the Windows logo and progression bar, it stops displaying some sec before the startup sound), then I success to remotely connect to the laptop through VNC, here I can see that Windows is reporting 3GB which looks "normal", and under driver tab I can see in system area a warning under the line "Mobile Interl(R) 945GM/PM/GMS/940GML and Intel 945GT Express PCI Express Root Port - 27A1" saying "This device cannot find enough free ressource to work properly (Code 12). If you want to use it you need to unactivate one of the other system device" [message was in French, this is my translation], the version of the pilote is 7.1.0.1015. I'm using BIOS version R0035J4, in the BIOS only 3GB are reported. Running Everest I saw that PAE is supported and activated, and the memory is detected, you can see here the Everest report: [url]
If I boot with 1x2GB it's ok (so the mem slot works ok against 2GB). If I boot with 1x2GB + 1x512Mo, it's ok too, so It's above the 2GB limit announced.
I tried to change the video driver, and also switch to VGA with same black screen of course.
So... what can I do next to try to have 2x2GB working (even if only 3GB are available) ? Does it looks a driver/Windows issue ?
I have a Sony Vaio fw 490 CTo for a week and it's running window vista home premium 64x everything doing fine until i got freeze when playing game. I open taskbar manager and saw my physical memory is at 90% ......
View 4 Replies View RelatedIve recently bought 2-2gb sticks to upgrade my memory to 4gb. Ive seen that for vista it can only support up to 3gb, which is fine,
but my computer still says that it is only 2gb? whats wrong
I have a Sony Vaio S460 laptop.
Recently it had been lagging really bad, and so I was advised that it might be a power supply problem, or, another solution would be to upgrade the memory.
I went to my local computer store asking about it, and he recommended trying to upgrade the memory (I currently had two 256 MB memory sticks, for a total of 512).
I told him my model number, and he pointed me to a Kingston 1 GB memory stick, and said he was pretty sure that it would be compatible. Since it was only $10, I bought two of them.
so I went ahead and replaced the two 256 MB memory sticks with my newly acquired 1 GB memory sticks. But after I put the laptop back together, and I pushed the power button, nothing showed up on the screen (although the lights indicated the power was at least on)