Sony :: Where Is Firestone Guide For Fresh Win 7 Instal (z Series)
Nov 8, 2009where i can find guide to Win 7 upgrade ?
I have read almost every tread here and everyone mention user "firestone" guide to fresh win 7 install but i can`t find it!
where i can find guide to Win 7 upgrade ?
I have read almost every tread here and everyone mention user "firestone" guide to fresh win 7 install but i can`t find it!
I share with You the steps I've made to install a fresh Win 7 on A Vaio VPCF11Z1E (EU model)
1 Before anything else be sure to make Your recovery disks If You haven't already done them. It's very important to actually do them since we'll need them later. You will use them for a future installation of the bundled utilities You may require.....
I recently purchased a refurbished TT Series laptop from SonyStyle. It didn't come with much in way of documentation - I'm still trying to sort out what they gave me.
Is there a write-up anywhere about the TT series computers? For example, something that tells how to adjust the screen brightness? Most new devices come with a booklet that identifies everything on the device, and tells how to use it. I find I still have questions about my TT, and while they may be rather ignorant (I don't know much about the TT), I'm still trying to figure out an answer....
I have a client who dropped their laptop and has a damaged screen. the graphics card and backlight seem OK because when its plugged into and external monitor the video output is perfect. the laptop was working perfectly for about a year after they dropped it, but then it suddenly started to lock up with no response from the keyboard or mouse. - meaning they have to power the device off before they can use it again. - it would then work ok and then randomly lock up again. There is no real pattern to it.
I have ran hardware diagnostics on the mobo, memory and hardrive with nothing showing as faulty.
I thought it may have been a software issue so I re-installed the OS. but the symptoms are exactly the same.
I recently ran Hard Drive Regenerator on the drive and it detected the hard drive no problem. - with no defects found on the drive.
I then tried to use Spinrite on the Hardrive, but Spinrite cannot detect any harddrives.
Does this mean a harddrive failure or a mobo hardrive controller problem?
Have a brand new MacBook O/S 10.5.6 (Leopard) Intel Core duo. Also have MacBook Pro also Intel core duo but running on O/S 10.4.11(Tiger). Want to run both on Leopard rather than have 2 different O/S's. Tried install Leopard Disks (which came with new MacBook) onto MacBook Pro, but all i get is Message " Mac OSX cannot be installed on this computer." Can anyone enlighten why i can't instal leopard on my MacBook Pro with the instal disks from my Intel MacBook?
View 8 Replies View Relatedwhich of these great guides in the forum can I follow to install Windows 7 Ultimate x64 on a VGN-FZ31Z ?
Is it possible to install W7 x64 on this type
I've written a SR240 CPU Replacement Guide. It covers disassembly, cpu replacement and reassembly.
It is in PDF format, 15 pages long, about 2.4MB in size. It would probably work for most SR2XX series notebooks, and maybe others as well.
Why a fresh vanilla install of windows 8.1 pro would keep waking up from standby? Which even viewer can I look at to figure this out?Â
View 5 Replies View RelatedI have Vaio VGN-SZ1M (bought in 2006) that I need to take apart. Unfortunately, I can't figure out how to pop out the keyboard. I have removed the "relevant" four screws from the bottom, then figured that the part between keyboard and display doesn't seem to be removable (as it is with my even older, super slow Toshiba Satellite I am relying on right now), and now I am stuck. Does anybody know where to find a disassembly guide? - Preferably a step-by-step guide as I am not only a blonde but also not exactly super computer-savvy (as this thread clearly demonstrates). Or does anybody know how to take this notebook apart?
For some reason the VGN-SZ1M (or VGN-SZ1M/B) has two different model names printed on it, the other one being "PCG-6J2M", but according to the Sony website the "PCG-6..." model number is used "for different purposes" - no idea what that means - and the "real" model number is VGN-SZ1M).
I have spent the past two hours trying to find a disassembly guide online (or just a quick "how to pop out/remove the keyboard" explanation, but haven't been successful. I have also tried to get in touch with Sony's customer service in the U.S., however, they cannot (or won't) help me because the laptop was bought in Germany (where I was living at that time), so the U.S. customer support doesn't feel responsible (or so), and the customer support in German doesn't apply because I am now located in the United States. Talk about being caught between a rock and a hard place. Don't take this as a rant, please, it's not meant as venting. Just trying to explain my level of "stuck-ness".
clean Windows 7 (64) installation. My guide is more of a 'bare bones' installation as I only installed what is needed for functionality of the big features. The guide is incomplete. I will continue to update the document as I make more progress. Please feel free to report anything you find that is incorrect etc.
keep in mind this is for a FZ280 E/B, I have no idea if it will work on other FZ models.
I am still having problems with the Bluetooth driver/software and the Wireless Switch Utility (what exactly is this needed for?). I believe the functionality for Bluetooth is dependent on the something to do with the Wireless Switch Utility. However I haven't had any luck installing either option.
There appears to be a problem with the power management. I unplugged the notebook for the first time and the battery went from 95% to 60% within 5 - 10 minutes. Any thoughts will be appreciated. I will be researching for a solution as well.
Below is the attached guide and a link to download the drivers I have used for the installation.
[url]
I just did a system restore of windows 8 (clean wipe) and went through the process of reinstalling all the drivers. Â I installed the latest version SmartAudio (8.32.43.0). Â In Google hang out it said the microphone wasn't working, then I clicked on the settings and made the internal mic the default, I got good mic for 1 second. Â Did it again and the same thing. Â But this is only for a single second. Â In skype I tried the same thing and it is just super quite, it doesn't register on the scale unless I blow directly into the mic (so I know it's picking something up). Â Last week I had my upgraded from win 7 Windows 8 install working just fine with the microphone (zero problems ever before with this thing). Â I checked in mic properties and DB and volume are set to max. So what is it about the fresh install that is making the mic all cracked out? (I checked the SmartAudio settings too) I'm having issues with my Bluetooth mouse too(disconnects at restart and have to reinstall) and Power Manager (it doesn't show up as a toolbar anymore). Â P.S.. I've gone to the X220 site and downloaded the latest drivers and installed system update.
View 1 Replies View RelatedDISCLAMER:The Windows 7 Beta is a pre-release version of Windows. While this a stable and high-quality beta,
it's not the finished product. It could crash your computer or cause you to lose important files or information.
BEFORE doing this procedure, backup all your data...
(Last update: May 27 2010)
Change log:
Mar 06 2010 - Changed SUS, VES, and VCC versions. Updated Intel 4965 adapter driver. Added Web-cam software. Added instruction for wireless band switching and disabling Bluetooth from device manager.
Mar 26 2010 - Updated Intel SATA/AHCI driver from 8.​9.​0.​1023 --> 9.6.0.1014
Mar 30 2010 - Updated Nvidia driver (laptopvideo2go) from 195.62 --> 197.16
Apr 03 2010 - Updated Nvidia driver (self modded inf) from 195.62 --> 197.16
Apr 22 2010 - Added Nvidia driver 197.45 through Windows Update
May 09 2010 - Update to SUS, S-button and additional settings in VCC.
May 27 2010 - Added Nvidia 257.15 driver, modded inf, and instructions.
The following steps below include various driver sources and install instructions.
1. Install your edition of Windows 7. I chose to change the UAC setting to never notify. If you leave it in the default setting, various prompts may open when installing the drivers and utilities. Open "Computer", click the "Organize" tab, navigate to "folder and search options", click "View" tab, and uncheck "Hide empty drives in the computer folder".
There will be two exclamation marks for the "Mass storage controller" and "Unknown device" in the device manager. Intel 4965 Wifi, Marvell network controller, and Conexant modem drivers are included in Windows 7. You can update them if necessary
From browsing the forums, i see that everyone is having trouble updating their drivers. Mobility modder currently does not support the ATI 4 series but there is still a way to install the drivers for us fortunuately . By doing this, you are able to install the display driver v9.6 but no CCC unforunately; however you can still retain the CCC v9.2 from Sony's official drivers.
1> Download the appropriate version OS of the 9.6 driver from [url]
2> Double click the file you just download and click install. It will unzip a folder to C:ATI (default). These are driver files. When the actual installation wizard comes up, cancel it.
3> Browse to C:ATI9-6_beta_win7_64_dd_CC (Driver name, e.g.)PackagesDriversDisplayW7_INF (For 32-bit) OR W76A_INF (for 64-bit)
**Btw, I am doing this example based on the Window 7 Install. (Other versions of the OS should be the same except the INF file name may be different)**
4> I am under 64-bit so I will use W76A_INF as an example for this guide. Double click on the INF file (for W7, it is named C7_81757)
5> Scroll down the file until you see a list like;
"ATI Radeon HD 2400 XT" = ati2mtag_RV610, PCIVEN_1002&DEV_94C1&SUBSYS_0D021002
"ATI Radeon HD 2900 PRO" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_30001002
"ATI Radeon HD 2900 XT" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_25521002
6> Add this anywhere between the entries you see above (does not have to be exact, just place this entry somewhere along the lines of the WHOLE list)
"ATI Mobility Radeon HD 4570" = ati2mtag_M9x, PCIVEN_1002&DEV_9553&SUBSYS_9033104D
Congratulations, the display driver can now be installed ONLY VIA the HAVE DISK method.
7> Quick review on HAVE DISK method; Device Manager > Right Click ATI 4570 then Update Driver Software > Browse my computer > Let me pick a list of Device drivers... > Have Disk > (Now browse to the INF file you just edited, in this example; the C7_81757 inf file.) Install, voila, DONE.
8> Now, to get the CCC v9.2 (Can't get 9.6 yet), get Sony's ATI drivers, run it and click on CUSTOM install, NOT EXPRESS, install CCC only and anything that is mandatory (DO NOT INSTALL THEIR DISPLAY DRIVERS!!!) .Voila, CCC 9.2 function (which is the same as 9.6 essentially).
I believe this method works for NW series w/ ATI 4570 too.
Quote:
UPDATED OCTOBER 27 2009 FOR OFFICIAL WINDOWS 7 RELEASE
will benefit many of you upgrading to Microsoft Windows 7 64-bit RTM. This install was done and tested on a Vaio VGN-FW139E/H.
Hardware
While the VGN-FW line shares many components, many models also differ. So, I will first list the hardware that is on the VGN-FW139E and the install was done on.
Audio: Realtek High Definition
Audio (HDMI): Realtek ATI HDMI Audio
Network: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
Wireless: Atheros AR928X
Touchpad: ALPS Pointing Device
SD Memory Card Reader: Ricoh
MS Memory Card Reader: Ricoh
Modem: Conexant CX11270
Video: ATI Mobility Radeon 3400 Series..................
I want to do this: Wipe out my Lenovo Thinkpad X220 HDD and install a fresh operating system, so what are the things to do before wiping out my laptap.
Â
What I have:
1. 4GB usb with Windows 7 installer
2. My laptap have 1 hdd, partitioned into two
 a. 97.9 GB ( where my OS is installed)
 b. 200 GB (where my personal files is stored)
How to wipe out my laptap, delete partiton and delete all data and instal fresh OS, Bios etc...
I have just received my upgrade for my VGN-Z21WN/B (my baby, love it!)... anyway, I did a bit of research before receiving it and everywhere I read suggested to do a fresh install - so thats' what I did. It actually all went okay, and it's happily running.
I visited vaio-link.com where I found some Win7 drivers, including:
- Bluetooth driver
- Realtek HD audio
- BIOS update for Win7
- Ethernet Driver
- Fingerprint suite
- Wireless LAN (Intel ProSet)
- WWAN
- nVidia graphics driver
All great , except now I am missing my FN keys. The FN keys for brightness, volume, switching display etc no longer work, and I cannot find a solution. One site I researched says to download the vista driver, but I cannot find that anywhere .. and then even people said that didn't work.
Secondly, although not a biggie, is there a VAIO Update driver?
Just a quick guide on how to make a bootable DVD using your Sony Upgrade Discs so you can do a clean install.
1) Insert your upgrade DVD into your DVD Drive and load up "Windows Explorer"
2) Browse to your DVD rom drive and expand it, there should be a bunch of directories, and you should have 2 that are called "Win7OS32" and "Win7OS64".....
I have a fresh copy of win 7 ultimate (legit of course.. got it from a microsoft event).
I have seen a few threads about clean installing vaios (boy do they put a bit of crapware there...) but not sure whats best to do..
I dont think I need/want any of the free apps (are there any good ones?) so I reckon I am going to blast the harddrive (I imaged the whole lot with another backup prog)
Whats the best strategy for this? i.e. whats best for getting drivers etc?
I noticed some files in c:windowsdrivers (an exe and a inf diretory, not sure which is for which) should that contain all I need?
Will I have issues with sony system stuff?
Also what about registering it? I guess there will be no issue as far as warranty is concerned (as said, it is a proper legit win 7)
My Y580 should be arriving shortly. I got it on the Black Friday Special and it comes with Windows 8. I bought a SSD to replace the HDD and I am wanting to downgrade it to a fresh install of Windows 7 Ultimate or Pro and I have a couple questions:
Â
How to do this for the Y580? I have not been able to locate one.
Â
Also I am assuming I would not want to use the Windows 8 device drivers correct? Do I use the Windows 7 device drivers?
Â
Would use the drivers from the Lenovo site or each devices specific website? I am going to try to save them on a DVD in advance and want to be prepared.
Now that the new Sony Z is out, I think it would meaningful to get a sense of the boot time for this system under various scenarios.
If people could post the boot times of their Z with this information:
- Whether you're calculating the boot with all the bloatware untouched (factory settings), with the $50 Sony Fresh Start (which still has a couple unnecessary programs), a Clean Install, or a Manual Uninstall of all programs.
- And the size of your SSD or HDD. If it is an SSD, it would be nice to know if you can tell us have many SSDs are in the RAID 0 configuration as that affects the speed.
I think this would be very helpful not just for direct comparison, but as another factor to consider in whether to do a clean install, which takes more tech-savvy than some may have.
Does anyone have a link to a website or PDF describing how to properly open and disassemble a VAIO VGN-SZ75GN?
I have a VAIO VGN-SZ75GN, bought about 8 months ago, and now I want to exchange the built-in hard-disc with a solid-state disc.
I need some guide with illustrations/pictures, how to reach the disc
I'm thinking about purchasing new z with "Fresh Start" option and wondering what's included with it.
On my current TZ, I've used "Clean Install" and everything worked fine for me.
I'm just wondering what you guys have set up for tweaks in Crysis and I'd love some help optimizing my copy. I'm playing under Vista with the 1.1 patch and would enjoy getting a few extra frames/options enabled without the high performance cost.
View 9 Replies View RelatedDell System Recovery Guide-Winter 2010
Written by Richard Hamilton – Thomas Chace-Contributor/Proofreader
Need to recover your Dell, but don’t know where to start? Just Curious? Look no further, as this guide will walk you through the system recovery process. Whether you use XP, Vista, or 7, you’ll be back up and running in no time.
I’ll go over the pro’s and con’s of each recovery method, so you can make an informed decision. Unlike some other computer makers, the recovery method’s Dell has offered has changed over time, hence the need for this guide .....
if any bloatware removal guides exist for Acer machines? IE, which programs can I easily remove. We recently picked up an Acer (desktop) and it came LOADED with bloatware.
View 6 Replies View RelatedI'm looking for a service guide for an acer travelmate 230/280, can anyone point me in the right direction?
I have the ones for travelmate 240/250 and aspire 1360/1520, is there somewhere I can upload them to?
i need aspire service manuel guide...
View 5 Replies View RelatedI will be adding to this regularly - please message me with anything and everything you would think would be helpful for others
I created this thread to be a one stop source for all the helpful information we have collected in over 500 pages of the owners lounge. Hopefully, I can keep it to one main page.
The order is as follows.
1. Introduction
2. General Information & Hardware Options
3. Operating Systems - XP, Fresh Vista, Windows 7
4. Software
5. Accessories & Recommendations
6. Basic Modifications
7. Advanced Modifications
8. Photo Gallery
9. Misc
The HP Laptop Out-Of-The-Box-Guide Windows 7 Edition
So, you just bought a new HP laptop? Congratulations and here starts your journey of optimization.
1.CREATE HP RECOVERY DISCS, Do not do anything else in this guide without doing this. Creating these discs will allow you to restore your computer to a factory state at any time if you mess up. To create these discs, click the start orb, and type in recovery. Click the program called recovery disc creation, and follow the prompts. IF YOU DO NOT DO THIS, YOU COULD RENDER YOUR SYSTEM INOPERABLE IF YOU MESS UP AND YOU WILL NOT BE ABLE TO FIX IT WITH A SIMPLE RESTORE. Also, back up your SwSetup folder (C:SwSetup) to a DVD for original software and drivers...............