I've written a SR240 CPU Replacement Guide. It covers disassembly, cpu replacement and reassembly.
It is in PDF format, 15 pages long, about 2.4MB in size. It would probably work for most SR2XX series notebooks, and maybe others as well.
Replacing Dell's default thermal paste in the Dell Studio XPS 1340 can lower your cpu, gpu and ambient temperatures by as much as 15C/60F.
When I first received my SXPS 1340 from Dell, my temperatures were:
THRM-57C, CPU-52C, GPU-62C.
For me, these temperatures were O.K., but I knew I could lower them by replacing the thermal paste.
My temperatures after replacing the thermal paste were:
THRM-48C, CPU-34C, GPU-50C. Note that after a month or two of having the MX-2 inside your computer, the cooler it will become as it settles
which of these great guides in the forum can I follow to install Windows 7 Ultimate x64 on a VGN-FZ31Z ?
Is it possible to install W7 x64 on this type
I have Vaio VGN-SZ1M (bought in 2006) that I need to take apart. Unfortunately, I can't figure out how to pop out the keyboard. I have removed the "relevant" four screws from the bottom, then figured that the part between keyboard and display doesn't seem to be removable (as it is with my even older, super slow Toshiba Satellite I am relying on right now), and now I am stuck. Does anybody know where to find a disassembly guide? - Preferably a step-by-step guide as I am not only a blonde but also not exactly super computer-savvy (as this thread clearly demonstrates). Or does anybody know how to take this notebook apart?
For some reason the VGN-SZ1M (or VGN-SZ1M/B) has two different model names printed on it, the other one being "PCG-6J2M", but according to the Sony website the "PCG-6..." model number is used "for different purposes" - no idea what that means - and the "real" model number is VGN-SZ1M).
I have spent the past two hours trying to find a disassembly guide online (or just a quick "how to pop out/remove the keyboard" explanation, but haven't been successful. I have also tried to get in touch with Sony's customer service in the U.S., however, they cannot (or won't) help me because the laptop was bought in Germany (where I was living at that time), so the U.S. customer support doesn't feel responsible (or so), and the customer support in German doesn't apply because I am now located in the United States. Talk about being caught between a rock and a hard place. Don't take this as a rant, please, it's not meant as venting. Just trying to explain my level of "stuck-ness".
I recently purchased a refurbished TT Series laptop from SonyStyle. It didn't come with much in way of documentation - I'm still trying to sort out what they gave me.
Is there a write-up anywhere about the TT series computers? For example, something that tells how to adjust the screen brightness? Most new devices come with a booklet that identifies everything on the device, and tells how to use it. I find I still have questions about my TT, and while they may be rather ignorant (I don't know much about the TT), I'm still trying to figure out an answer....
clean Windows 7 (64) installation. My guide is more of a 'bare bones' installation as I only installed what is needed for functionality of the big features. The guide is incomplete. I will continue to update the document as I make more progress. Please feel free to report anything you find that is incorrect etc.
keep in mind this is for a FZ280 E/B, I have no idea if it will work on other FZ models.
I am still having problems with the Bluetooth driver/software and the Wireless Switch Utility (what exactly is this needed for?). I believe the functionality for Bluetooth is dependent on the something to do with the Wireless Switch Utility. However I haven't had any luck installing either option.
There appears to be a problem with the power management. I unplugged the notebook for the first time and the battery went from 95% to 60% within 5 - 10 minutes. Any thoughts will be appreciated. I will be researching for a solution as well.
Below is the attached guide and a link to download the drivers I have used for the installation.
[url]
DISCLAMER:The Windows 7 Beta is a pre-release version of Windows. While this a stable and high-quality beta,
it's not the finished product. It could crash your computer or cause you to lose important files or information.
BEFORE doing this procedure, backup all your data...
(Last update: May 27 2010)
Change log:
Mar 06 2010 - Changed SUS, VES, and VCC versions. Updated Intel 4965 adapter driver. Added Web-cam software. Added instruction for wireless band switching and disabling Bluetooth from device manager.
Mar 26 2010 - Updated Intel SATA/AHCI driver from 8.​9.​0.​1023 --> 9.6.0.1014
Mar 30 2010 - Updated Nvidia driver (laptopvideo2go) from 195.62 --> 197.16
Apr 03 2010 - Updated Nvidia driver (self modded inf) from 195.62 --> 197.16
Apr 22 2010 - Added Nvidia driver 197.45 through Windows Update
May 09 2010 - Update to SUS, S-button and additional settings in VCC.
May 27 2010 - Added Nvidia 257.15 driver, modded inf, and instructions.
The following steps below include various driver sources and install instructions.
1. Install your edition of Windows 7. I chose to change the UAC setting to never notify. If you leave it in the default setting, various prompts may open when installing the drivers and utilities. Open "Computer", click the "Organize" tab, navigate to "folder and search options", click "View" tab, and uncheck "Hide empty drives in the computer folder".
There will be two exclamation marks for the "Mass storage controller" and "Unknown device" in the device manager. Intel 4965 Wifi, Marvell network controller, and Conexant modem drivers are included in Windows 7. You can update them if necessary
I share with You the steps I've made to install a fresh Win 7 on A Vaio VPCF11Z1E (EU model)
1 Before anything else be sure to make Your recovery disks If You haven't already done them. It's very important to actually do them since we'll need them later. You will use them for a future installation of the bundled utilities You may require.....
where i can find guide to Win 7 upgrade ?
I have read almost every tread here and everyone mention user "firestone" guide to fresh win 7 install but i can`t find it!
From browsing the forums, i see that everyone is having trouble updating their drivers. Mobility modder currently does not support the ATI 4 series but there is still a way to install the drivers for us fortunuately . By doing this, you are able to install the display driver v9.6 but no CCC unforunately; however you can still retain the CCC v9.2 from Sony's official drivers.
1> Download the appropriate version OS of the 9.6 driver from [url]
2> Double click the file you just download and click install. It will unzip a folder to C:ATI (default). These are driver files. When the actual installation wizard comes up, cancel it.
3> Browse to C:ATI9-6_beta_win7_64_dd_CC (Driver name, e.g.)PackagesDriversDisplayW7_INF (For 32-bit) OR W76A_INF (for 64-bit)
**Btw, I am doing this example based on the Window 7 Install. (Other versions of the OS should be the same except the INF file name may be different)**
4> I am under 64-bit so I will use W76A_INF as an example for this guide. Double click on the INF file (for W7, it is named C7_81757)
5> Scroll down the file until you see a list like;
"ATI Radeon HD 2400 XT" = ati2mtag_RV610, PCIVEN_1002&DEV_94C1&SUBSYS_0D021002
"ATI Radeon HD 2900 PRO" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_30001002
"ATI Radeon HD 2900 XT" = ati2mtag_R600, PCIVEN_1002&DEV_9400&SUBSYS_25521002
6> Add this anywhere between the entries you see above (does not have to be exact, just place this entry somewhere along the lines of the WHOLE list)
"ATI Mobility Radeon HD 4570" = ati2mtag_M9x, PCIVEN_1002&DEV_9553&SUBSYS_9033104D
Congratulations, the display driver can now be installed ONLY VIA the HAVE DISK method.
7> Quick review on HAVE DISK method; Device Manager > Right Click ATI 4570 then Update Driver Software > Browse my computer > Let me pick a list of Device drivers... > Have Disk > (Now browse to the INF file you just edited, in this example; the C7_81757 inf file.) Install, voila, DONE.
8> Now, to get the CCC v9.2 (Can't get 9.6 yet), get Sony's ATI drivers, run it and click on CUSTOM install, NOT EXPRESS, install CCC only and anything that is mandatory (DO NOT INSTALL THEIR DISPLAY DRIVERS!!!) .Voila, CCC 9.2 function (which is the same as 9.6 essentially).
I believe this method works for NW series w/ ATI 4570 too.
Quote:
UPDATED OCTOBER 27 2009 FOR OFFICIAL WINDOWS 7 RELEASE
will benefit many of you upgrading to Microsoft Windows 7 64-bit RTM. This install was done and tested on a Vaio VGN-FW139E/H.
Hardware
While the VGN-FW line shares many components, many models also differ. So, I will first list the hardware that is on the VGN-FW139E and the install was done on.
Audio: Realtek High Definition
Audio (HDMI): Realtek ATI HDMI Audio
Network: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
Wireless: Atheros AR928X
Touchpad: ALPS Pointing Device
SD Memory Card Reader: Ricoh
MS Memory Card Reader: Ricoh
Modem: Conexant CX11270
Video: ATI Mobility Radeon 3400 Series..................
Just a quick guide on how to make a bootable DVD using your Sony Upgrade Discs so you can do a clean install.
1) Insert your upgrade DVD into your DVD Drive and load up "Windows Explorer"
2) Browse to your DVD rom drive and expand it, there should be a bunch of directories, and you should have 2 that are called "Win7OS32" and "Win7OS64".....
Does anyone have a link to a website or PDF describing how to properly open and disassemble a VAIO VGN-SZ75GN?
I have a VAIO VGN-SZ75GN, bought about 8 months ago, and now I want to exchange the built-in hard-disc with a solid-state disc.
I need some guide with illustrations/pictures, how to reach the disc
The last AW has disappeared from usa sonystyle.com Any news, info about coming replacement? When
View 10 Replies View RelatedMy cat knocked a glass of juice over and some splashed onto the keyboard of my month old SR290.
Multiple sticky keys and some just aren't working.
I took a couple of sticky keys off to clean with rubbing alcohol and a q tip and now they don't work (they did before cleaning
how to remove the lower part of the screen bezel? I removed the two screws at the top, popped it off all the way down to the hinges,
View 4 Replies View Relatedand first of all sorry as there seem to be loads and lots of ssd threads already.
I just couldn't find any specific on that model.
Is the z11 the same as the z520?
My boss wanted to buy a new laptop (office work only) and I adviced against it, because I think the hardware of the z11 is still VERY fast.
The bottleneck is the old 5400rpm hard drive.
I've a Vaio TT that I'm (or was) fairly happy with, and before that I had the TX and the TZ.
I would however like to replace the TT since the Blu-ray has stopped working for the second time and I just refuse to pay an insane amount of $ to have it fixed. The question is, - Replace it with what?
I want an ultra-portable, i.e. 12" or smaller screen, weight less than 3 lbs, and it must have Blu-ray and SSD. Where can I find one
I have been having a bit of a nightmare with Sony support. Basically, when my laptop first arrived, my F7 key always looked a bit "off" - the backlight under it always seemed brighter, and it was slightly raised on one side, but I ignored it - how often does anyone use F7?
Anyway, I was cleaning the keyboard because it has that stupid type of keyboard that picks up every bit of oil (drives me mad!) and the F7 key just came off. It wasn't even a harsh cleaning
where I can find a brandnew original one?
View 6 Replies View RelatedI have a non working touchpad for my SZ-483N/C. Does anyone know a place that I can get a replacement?
View 8 Replies View RelatedI want to replace my HD with a SSD.
I can't find a service manual.
Does anyone know how to disassemble the computer
where I can find a service manual or instructions on how to get inside a VAIO TZ37? I'm looking for options to replace the 120GB HDD with a 128GB (or bigger) SSD. I understand the 120GB HDD is PATA but not sure how many pins the connector has.
I know I can just unscrew the bottom and have a look but I prefer to find out a bit more before attempting that. My past experience in trying to get inside a Z505R was very frustrating as the screws were hidden under a few snapped in clips, they were very difficult to get off without breaking them (without the proper knowledge or tools).
Also while I am asking questions, here are couple more ...
1. Is it absolutely not possible to go beyond the 2GB memory limit?
2. Are there Windows 7 drivers available for TZ37?
3. If so, is it worthwhile upgrading from Vista Biz to Windows 7 on the TZ37?
I have been thinking about the X series but with its Atom CPU and lack of DVD/RW, it's kinda like a very very expensive netbook. So I think it would be better investment to beef up my TZ37 with a SSD. I have been very happy with it once it's booted up and ready, it's just that Vista takes years to boot time the 4200rpm HDD. My work around has been putting it to sleep 95% of time and only power off/on when I absolutely have to or when it has crashed big time. The wake up from sleep is very quick, so that's the saving grace of its slow HDD.
Anyone know where to get some replacement parts such as the keyboard for the Vaio Z?
View 4 Replies View Relatedif you can take apart a Sony Z and replace the optical drive with a standard hard drive? Would the older tutorial here be the same way you can take apart a new sony Z or how do you think you could get in there?
[url]
Or is that a different model? I don't suppose there's a new tutorial out for the new Zs as they just came out.
On another note - I heard you're suppose make a new connector for the hard drive because the Sony Z uses microSATA or uSATA or something like that for their optical drives. There isn't a connector that you can readily purchase now.
My new Sony Vaio I ordered will be arriving soon. I did some research and the main criticism about the new laptop appears to be the short battery life.
I saw this battery on amazon for the Sony Vaio E series. Link
I was wondering would this give extra battery life if I bought it? I think the battery shipped with the Vaio is 3500mah but this new one is 5000mah. How many extra hours would it give? Just wondering if it is worth it or not.
Also is the battery for the 15.5" screen size E series or the other sizes?
how to take apart the keyboard on the Sony Vaio TX.
[url]
However, the keyboard 'came-away' from the rest of the latop so fast upon lifting it up I did not get a real chance to see how it actually connects to the laptop.
I am now having a real problem connecting the keyboard back to the laptop. Does anyone have any high resolution images of how their laptop is connected or how it should be done?
I contacted Sony support about the keyboard color; I was going to change the color of my system to white so I could have the white keyboard (and I really started liking the color).
Unfortunately, it was too far along in the process (even though it was backordered and not shipping til the end of April) to modify the order.
It isn't really worth the trouble, in my opinion, to wait for the notebook, return it, and wait another two or three weeks for the white one
I replaced the 40 GB hard drive that came with my VGN-B100B with a Western Digital 250 GB drive. When I installed Windows XP Professional on it, the partition was only 127 GB. The WD drive is a PATA, which I understand to be synonymous with EIDE, which should work on this computer. Is there a limit to how large a hard drive this computer will recognize?
View 6 Replies View Related