I am just in the process of downloading this, should be done in a hour or so, and wanted some feedback of those that are running x64 on FZ's such as driver issues ect? I am running Windows 7 Ultimate x86 (7600) at the moment
if anyone else has had a problem with a FZ21Z laptop and I found a whole load of problems with the GPUs and sony are fixing them:
I am trying to diagnose whether my problem is linked.
Last week i was using it fine and then all of a sudden it just stopped working. When i rebooted the sony vaio screen at the start has green lines and other dotted lined running from top to bottom. It then went into start up repair from which at first i managed to get it to load but now will not load at all.
I have tried reinstalling the OS (W7) which worked for a while but then the same problem came back and now i cannot get it to start at all.
The error reportsays something like startup repair offline
signature 01: 6.1.7600.16385
signature 04: "some more numbers"
signature 05: autofailover
signature 07: bad driver
os version: 6.1.7600.2.0.0.256.1
locale ID: 1033
Before all this it did get very hot.
Does this problem look like it may be the GPU and therefore would it be worth contacting sony. I bough the laptop in early 2008.
I tried to copy data from one hard drive to another, and a little notice came up saying I would be better using a high speed port. I was cleaning out my closet yesterday, and noticed on my FZ box it says it comes with 3 high speed ports, but only two show in device manager, which are the two on the right side, as the drive I was transferring from was plugged into the one on the left.
I'm thinking about doing a full clean install of Windows 7 (64-bit) on my SZ6 (SZ680 in my case),
and was wondering whether any of you guys have managed to do so successfully already (getting all hardware to function, as well as the Fn, Brightness keys, etc.
Does anyone have any idea if it's possible to download Windows 7 RC 1 for a VGN-FZ190 pre-installed with Vista Ultimate? I'm worried about the drivers not being backwards compatible and it was a mistake buying from Sony 2 years ago without realizing they don't have each and every single driver needed for this computer on their website.
I just upgraded from Vista to windows 7 pro 64. I have a Sony Z, but there isn't any driver support for the video card (geforce 9300m gs) from Sony. The computer doesn't seem to even be recognizing there is a graphics card aside from the on board one.
Also, in device manager there is a 'Base System Device' driver isn't installed either. I've gone over this with sony but I keep getting different people and basically telling me to do the same thing
Can you guys play blu ray on Z in speed mode? I can play in stamina fine but not in speed mode. I think it's because the video card driver's not up to date
i just installed windowns 7 on my tz21,everything works perfect,but my WLAN and WWAN do not work at the same time it means if i want to use WLAN,i have to switch WWAN off by using the VAIO Smart Network can any1 sort this problem for me?many thanks. and it was fine when on vista.
I just recently installed a 64 bit version of windows 7 on my sz650 and so far everything is working great. Most of the important drivers have already been detected by windows.
The biggest inconvinience I have is that I can't seem to find a touchpad driver for the 64 bit version of windows 7. Th touchpad works fine and I can use it but I cant use the scroll function. I've been looking all over the internet for a compatible driver and it's driving me crazy. i really don't want to go back to vista as I like 7 a lot better. Has anyone gotten the scroll function to work on 64 bit 7? If you have can you please post a link to the driver?
I have TZ191 N XC. 32GB SSD. It ran Windows Vista Business beautifully (clean install, of course).
Upgrade install of Windows 7 took forever - roughly 2 hours. But, no errors, or hiccups in installation. Boot times seem about the same as Vista - which were pretty quick, but its been a year now, so I'm a little ho-hum lol. Anybody with a clean install notice faster boots?
Other than that, Windows 7 feels pretty much like Vista. I notice very little improvements, or problems. Aesthetically, I wouldn't even call it much different. As I mentioned to someone on a different board, I don't know if I'm "unimpressed" or "still happy". What's the difference with this OS again?
I faxed my receipt/email to the number provided in the confirmation email and I was wondering if anybody has gotten a confirmation that your request for the Windows 7 upgrade has been successful.
Just installed Windows 7 on a separate partition of my vaio SR. Things went surprisingly smooth. It picked up many drivers (unlike vista) right off the bat. ATI graphics, wifi, ethernet were all working. For the rest, I (re)installed drivers from esupport site for Vista 32 bit. The only minor problem I ran into was the Intel Chipset driver for which I had to run it in Vista Compatibility mode to install. Has any other SR owner given windows 7 a shot?
I've installed Windows 7 64-bit on my Sony Z12MN today and cant seem to get the drivers to work. I tried downloading 64-bit drivers from Sony's website for their Z690 which is more or less the same but any driver I try to run, I get the message that its not intended for my model and the installation aborts.
Is there any way to extract the files from these Sony drivers and then manually install the driver? I know WinRAR couldnt do it
Just installed windows 7 on my vgn-sz650. I have ran into a couple road blocks.
1) I keep getting an error window that says "The installed battery may not be properly connected... ...Click "OK" to enter hibernatemode". I don't get this error with vista. I get the error with the AC plugged in or running off the battery.
2) Can't get the FN keys to work.
Anyone have experience with installing windows 7 on a SZ series?
After successfully upgrading bios to enable VT, I'm noticing some issues with Win7 and my vgn sz280p. The s1/s2 buttons do not work, the video card switch does not say anything when switched (in vista and xp i get a notice to reboot in order to switch graphics cards), and the FN-F1 to F7 keys do not work properly. FN-F1 does not work, F2-F4 (audio controls) work although nothing shows in the screen and no beep, F5-F7 (contrast and LCD/projector) do not work. FN-F10 and F12 also do not work, even FN-Break (delete).
Anyone here using vgn sz and windows7? How did you resolve the buttons issue? I tried installing the vista drivers but they wouldn't work (most of them).
Also, what upgrades have you guys done to a vgn sz laptop? RAM, CPU? I believe I can upgrade RAM from 2GB to 4GB but not sure if the bios will take it. And I'm not sure if I can switch from core duo to core 2 duo.
Other than these few issues, I believe this vgn sz laptop performs good with windos 7. This 3yr old laptop of mine outperforms my other cheaper laptops that I bought a couple months back.
I have installed Windows 7 Ulitimate on my FZ280. I followed the instructions of ScuderiaConchiglia and the win7 suggestions of Dr Pratik. The instructions seemed to be perfect.
I installed the OS and followed his instructions. Everything seems to work perfectly, including the Fn keys.
But I have found my first issue. I am having problems playing blu ray discs. I have tried Windows Media Player, DivX and Cyberlind PowerDVD to no avail
So the mic on my TT was working under Windows 7 the other day. But now I notice today that it is not working at all. The built in mic isn't even showing, nor is a plug in mic to the mic port
When I installed Windows 7 32 bit I seemed to have lost a few of my drivers, those being the scroll bar in my touchpad, my camera, and the computers ability to go to sleep.
I found this link ftp://ftp.vaio-link.com/PUB/VAIO/ORIGINAL/ but I don't know which ones I need. So if any one good help, that would be grea