Sony :: Z590 No Wireless N
Jan 11, 2009Is there no wireless N just bought a linksys n router and could have sworn the Z590 had wireless N. I want to use it for streaming on my network
View 7 RepliesIs there no wireless N just bought a linksys n router and could have sworn the Z590 had wireless N. I want to use it for streaming on my network
View 7 RepliesNot sure who moved my post to "price check", but if I wanted it there I would have put it there as I am looking for opinions from Sony users and owners who frequent this specific thread and possibly not the price check thread. Thanks
I am preparing to sell my Z590, it has 4GB of RAM, original Sony restore disks, 320GB 7200 RPM HD and I believe a 2.4Ghz P8600 processor, slimline ac adapter and the Sony high resolution screen.
if the CPU in Z is removable / upgradable like PC or is it solder on the motherboard like TZ?
View 4 Replies View RelatedIS there a travel adapter for the Z that is smaller and thinner then the one that ships with it???
View 6 Replies View RelatedWhen I try to customize Z590 CTO, the only option for CPU is P8400, but for Z540 CTO, P8400, P8600 and P9500 are all optional.
Sony don't want to put better cpu to Z590? I thought Z590 should be superior to Z540......
after seeing that Sony had updated it's drivers page with Windows 7 drivers, I decided to take the plunge and install Windows 7 on my VGN-Z590.
Everything worked out fine, and seamlessly (well, except video, that one got a little weird for a bit, but I eventually figured that out), except for one thing.
I have a Sony SRS-BTM30 Bluetooth speaker. This used to work just fine with my VGN-Z590, when I was running Vista on it, but now that I've installed Windows 7, it refuses to connect.
I can pair it just fine, it shows up amongst my bluetooth devices, but unlike previously, it does not show up in the list of "Playback Devices" (in the Windows 7 mixer/audio controls), and if I go to Audio tab of the Windows 7 Bluetooth Settings, it shows up in the list of devices, but if I select it and click on Connect, it will flash "Connecting" for a second, then return to its previous "Disconnected" state without connecting.
So, I was wondering if anyone else had any similar experiences with their Bluetooth gear.
Also I am wondering what Bluetooth driver you guys (people who have upgraded their Zs to Windows 7) are using? I noticed that there are no Bluetooth drivers listed in the Sony eSupport site for the VGN-Z590's Windows 7 drivers. I tried, uninstalling the Bluetooth drivers that came along from my previous OS (Vista) install, during the Windows 7 upgrade process and tried reinstalling the Windows Vista Broadcom drivers for the VGN-Z590, but that didn't seem to make a difference.
I just got a CTO Z590 2.4 GHZ, 3 GB ram, Vista Business "Fresh Start". I'm getting a feel for its performance.
When I attempt to play a HD video with my from within IE, Chrome, Firefox, or quicktime at full screen the video is choppy, less than 10fps. I've got the newest versions of webbrowers, flash, and quicktime.
Here are some examples:
[url]
[url]
[url]
I've let the videos buffer so internet connection isn't an issue, and I'm in "speed" mode.
I'm upgrading from 6 year old 1.4Ghz Athlon, so I had expected the Z590 wouldn't have a problem, am I expecting too much?
Do others have an issue with these videos?
Should I make use of my XP downgrade disk?
Are the components that come in a 2.26 ghz motherboard compatible with a 2.53 or 2.66 or higher ghz processor? I plan on ordering a Z590 as I fear the 690 will end up starting at a higher base price (ie like in Canada), and then upgrading it with a faster processor, more ram, etc. I just want to make sure I can do all of those things without issue.
View 10 Replies View RelatedWhat's the difference among these three?
I configure(CTO) the same spec (color, CPU, Harddrive and so on) for all these three. But the prices are a little bit different. They have same graphic card 256MB too. Does anyone know about the difference?
Another question is... Are Sony SR series good? I configure them as Z series, the only difference is DDR2(SR) and DDR3(Z) and SR even has 512 graphic memory.
Got Display working great. Used Euro drivers. However
Flag says power management driver not installed- Sony programmable i/o driver
and i cannot get the protector suite to work, it installs but states i need to plug in fingerprint reader into usb port.
I didn't make the disks when I first bought the computer (not sure why not) but I want to make disks for just in case I need to reformat in the future. What are the steps I need to take to do so? I am using Windows Vista Business.
View 10 Replies View Relatedjust installed the Intel X25 160GB SSD. If you all coach me on what benchmarks you would like to see I would be more than pleased to post them.
It does seem to make the system snappier - but I question the cost benefit.
My question for you all is that I cloned the drive using acronis true image and I am wondering if I would get better performance if I did a clean install rather than a clone of my drive?
Just received a z590 that I want to repalce the 5400rpm HD with a faster one.
I did a search, but all the links no longer work.
Looking specifically for directions on how to remove the keyboard to get to the hardddrive (e.g. what screws or tabs to pop open)
how do we go back to vista when august comes around. my z didnt come with any vista disc?
View 3 Replies View RelatedI recently updated my bios and decided to do a new full install of Windows 7. (Previously running Windows 7 Beta).
After doing a clean install and installing the Sony Notebook Utilities. I started getting this pop up message.
"The installed battery may not be properly connected to the computer or may not be compatible with the computer.
Click OK to enter Hibernate Mode, and remove reinsert the battery
See the electronic VIOA(R) User guide for more information about using the battery"
At first I thought this was an issue with Windows 7 - so after searching the forums and no results I figured I would revert back to Vista. Now I am getting the same error.
I also have two Sony Notebook batteries here - both bought direct from Sony. One extended and one standard - both give same error message.
Could this be a BIOS issue? Is there a way to revert to an older bios?
I'm trying to determine if owners of Z590s that were purchased after the win7 upgrade start date (6/26) have been able to register for Sony's upgrade program.
View 6 Replies View RelatedI would like to purchase a Z590 which is currently configured with a SSD Raid of 60GBX2
I was hoping I could break the raid configuration and use one SSD for OS and other for data.
But 60gb for data might be less. Can I replace both SSDs with
1 2.5" SSD and 1 250 GB standard SATA notebook hard drive
if you have an older SZ and want to add a 3rd wire, this will show you how and where to put it.
So a while back I upgraded the the 4965AGN in my SZ750N to an Intel 5200, since that day, B&G has been noisy. I managed to arrange the antenna connections in such a way as to minimize it to within tolerable limits. I also talked to some experts and they said it wasn't going to hurt anything if there was a bit of static so I left it.
I have known for a while that is was the white antenna lead that was causing the static. Unfortunately disconnecting it caused a drop in signal. While working on my Windows 7 guide I had a problem and had to open the laptop. While doing so I noticed the white lead and the antenna it attached to. I hadn't ever really noticed where it sat before. Sony couldn't have hardly chosen a worse place for it.
Sony decided the best place for it, and I assume this is because they merely upgraded the old 2 wire wireless to 3 by adding this, is almost under the power button. Right next to... a speaker. The lead runs along a Speaker wire and puts the antenna right next to it. See pics 1 & 2................
I have a Sony Vaio VGN N130G with an
integrated Intel PRO/Wireless 3915ABG wireless or
Intel PRO/Wireless 3945ABG that runs the standard sony driver.
I also have a Dell Inspiron 6000 with a Intel PRO/Wireless 2200BG that runs the driver for Intel Proset/Wireless driver .....
I have a Sony Vaio VGN N130G with a Pro/Wireless driver.
I searched for a driver called Intel® PROSet/Wireless driver. This driver pulls down 2-3 bars of wireless signal while my Sony Vaio with Pro Wireless driver only pulled down 0-1 bars intermittently.
I'm having issues with my SR420's wireless connection. I'm running Vista (64-bit) and my wireless adapter is the Intel WiFi Link 5100 AGN. My router is a Linksys WRT54G.
The problem: My connection overall is flaky, unless I'm within 20 feet of the router.
The connection drops intermittently, but when I'm able to maintain one, my system reports speeds of 1-2 Mbps.
I'm confident the router isn't the issue because I have two other laptops in the house (both running Vista—one 32-bit, another 64-bit) that have no issues connecting or maintaining a connection.
Both are able to maintain speeds of 54 Mbps (I've run speed tests on all three systems to verify).
I just got a new VGN-NW230 and the wireless seems very slow and has had problems connecting at times. The laptop has an Atheros AR9285 (it's N and the specs say it's 150 Mbps capable) and my router is a Netgear WNDR3700. I've updated the drivers on the Atheros and the router firmware is up-to-date.
The card only reports connecting at 65 Mbps. I have another laptop with an Intel 5100 card and it connects anywhere between 150-300 Mbps. For a "real world" test, I compared the speeds on speedtest.net. The Atheros (Sony) is getting at most 1.5 Mbps down, while the laptop with the Intel 5100 gets 17 Mbps down
Sony is using the Atheros 802.11b/g/n on the F11.
Does it support 450mbps or just 300mbps? like Intel ultimate N 6300.
Has anyone with the SZ series got the wireless switching utility to work on windows 7. I got everything else to work except that. I tried both the vista driver and xp.
I don't use bluetooth so i prefer to turn it off. But when it's disabled the blue bluetooth light is still lit
Ive had my FZ190 for about 2 years. Every time I move my laptop the wireless indications on the front will turn off, thus loosing my internet. Then I have to fiddle with the wireless switch on the front to get it to reconnect
View 4 Replies View RelatedI recently got a sony vaio CW at bestbuy yesterday. The link for it is below. Brought it home and started using it.
Everything worked perfectly for the first hour, and then the wireless just went out. It will no longer allow me to search for wireless networks. Two other laptops in my house are working fine so its not the router.
The wireless switch on the front is ON, however the little light is not lit. When I go to the SmartWi Connection Utility in the taskbar, it only lists an on/off option for Bluetooth, no Wifi option
I have a Sony Z11, and sometimes my job takes me far away from Wi-Fi coverage, however my 3G iphone does get 3G reception.
View 10 Replies View RelatedMy wireless switch on my Z seems to not function.
When I turn it off, I maintain my wireless connection. The light turns off, but my connection maintains.
i've been using the VPCZ1, and everything has been working great. but recently, i've been having this problem where out of the blue, my internet access gets cut off. And I cannot reconnect to the connect because it shows that there are no available networks. I have to restart the computer to get it to fix itself. 2nd time it happened was today.
View 10 Replies View RelatedMy new Sony VAIO SR 390 arrived yesterday. When I turn on the computer, restart, awake from sleep, etc, I have to manually disconnect and reconnect to my wireless network. If I don't, I have the little yellow triangle in the tray saying "unidentified network" and the internet doesn't work.
I have turned the wireless switch on and off, disabled and enabled the connection, updated the driver, and changed the power settings in the device manager. All of this has not helped.
Other than that, I have had no problems and I'm very happy with the computer. I haven't noticed the battery drain issue either.