I currently have two Acer laptops, an Aspire 5630 laptop and an Aspire One Netbook. The power adapter for the 5630 is a bit bigger (i.e., the "black box in the middle of the power cord) than the one for the netbook. The adapter for the netbook won't charge the 5630, however, when I plug in the adapter for the 5630 into the netbook, it says "charging" and seems to be charging the netbook fine. My question is whether this could do any damage to netbook or the netbook battery.
I have an Acer Aspire 5630 and the USB ports do not go off when Windows is shutdown, hibernating or when it goes into slleep (standby) mode. They only go off when I disconnect the AC power. I just bought an external USB drive as my internal is almost full, but I don't want to have the external drive on 24/7. Disconnecting the drive is a bit inconvenient as I use the laptop with an external display and keyboard and keep the laptop itself hidden behind my desk. I updated the BIOS to Ver. 3.60, but I don't see settings in the BIOS for USB ports. Can these ports be turn off programatically. Do I need a special Acer Application or drivers to turn off the USB ports? I removed all the Acer Management bloatware that came with the laptop. Are there any jumpers inside the laptop that need to be changed?
I have a Dell Inspiron 1520 and my friend has a Latitude D820.
Tonight she accidentally plugged my power adapter into her laptop. A few hours later, she noticed that her laptop indicated that it wasn't plugged in, and that's when we realized that she had accidentally used my adapter instead of hers.
Now my adapter doesn't work at all. We've tried the adapter with both our laptops with different outlets with the same problem, so we know it's the adapter. The green light also doesn't come on when it's plugged in anymore.
Did plugging my adapter into her laptop somehow screw up my adapter, or could this just be a coincidence? Is there any way to fix the adapter or at least figure out what the problem is? And if I have to purchase a new adapter, do the universal ones they sell at retail electronics stores work OK? I would order one from Dell but I'm working on a project now and I don't have time to wait for it to ship.
I have the Aspire 1410 -2285 with Windows 7 and the Celeron SU2300 Processor. The AC power supply clearly shows the specifications as 19 volt, 1.58, amp, 30 watt. I want to purchase another adapter but everywhere I search lists the adapter for the 1410 as 19 volt 3.42 amp and 65 watt. This include Amazon. Can I use this AC adapter with this computer.
The power adapter has the following specs. Input: AC100-240V Output: DC19V 3.42A Power: 65W
I purchased a Targus APA10US universal power adapter. Its specs are as follows. Input: AC100-230V Output: 15-24V -2A Power: 65W Max
My Aspire calls for a #14 tip, but that one did not come with the adapter. Can I use another Targus adapter (#3) with a different tip without doing damage to the PC? I have been told that the tip does some type of voltage regulation and adjusts to the settings of the PC.
I have an acer travelmate 4002wlmi, i had power adapter problem, the old one semms to be wrong, the notebbok was standing 3weeks along, today i get a new power adapter i want to charge but it doesent, i made the battery out and pussed the powerbutton 30seconds, an after that it begans to charge. some time after i tried to start my computer but it wont, just the fan o the power light on but on the screen heappens nothing, and not boot on.
I have just installed an i7 2670Qm on my T420 today.The machine will crash pretty soon after booting up, with the screen having colorful vertical and horizontal lines before it restarts itself and give the memory error beeping pattern (1 beep-pause-3 beeps-3 beeps-pause-1 beep).So then I took out one RAM from the bottom, and the machine appears to work normally again, more or less.
In the OS (Win7 64), The power manager alerts me that the 65w AC adapter is giving not enough power, so the laptop is running on battery. I thought I just need a 90W AC brick so the laptop will work as it should, so I am arranging a 90w one to come in later. But on a second thought, if the battery cannot start the laptop with 8GB of RAM properly.
Is it the CPU or RAM or Mobo or something else? Where should I look?The machine works fine with the previous CPU i3-2310m and 8GB of RAM.The RAM modules I have are 2 x 4GB Samsung 2Rx8 PC3-12800S-11-11-F3.The BIOS version is updated to the latest 1.46.
Our Studio 1749 will retain a solid connection when the power adapter is plugged into the power board along the side of my laptop. I am unsure if the pins residing in the power board are pushed toward each other so as to not retain connection when the adpater in plugged into the laptop.
problem i have with my lcd screen.P01-10-09_14.18.jpg
As you can see the screen is completely white, its hard to tell by the picture but the edges off the screen are fading to black and there is lots of little lines running horizontally as well.
Now when i plug an external screen the picture comes up on the external and the computer works fine, just seems that the laptop screen is playing up for some reason.
Also when i turn the laptop off for an hour or so the screen suddenly comes back to life, sometimes for days and sometime for only a couple of hours.
Kingston Memory/4GB 667MHz DDR2 Non-ECC CL5 SODIMM (Kit of 2)
but my acer only recognizes 1 module at the time. i tested both modules seperatly but and both work so its not the modules. also the bios sees only 1. what is wrong here? according to the sites and manuals it should recognize both mdules.
Recently I bought new Acer Extensa 5630 with 4GB & 320 GB Hard disk.I installed Windows XP os ,on mycomputer properties, it is showing 3GB of RAM Size,I contacted the dealer who sold the laptop and he is telling 4gb is not supported for Windows XP.SO I changed the OS to VIsta home Basic stil it is showing 3GB instead of 4GB.
if i can get my Card reader built in to the ACER 5630 to read SDHC cards? surely it could be sorted with a driver update? real pain in the ass if no work around
I have acer 5630 bought in 12/08, 5 months later---- charged overnight. Woke up in morning to find that top corner on back of screen is melted and bubbled up, like it shorted out from the inside. Sent to Acer and tech says " You had to put it next to a heat source". I told them NO WAY!, but they say there is no way this could happen without a heat source from the outside. I guess someone got in the house last night and took a propane torch to it, or maybe they held a candle to it for ten minutes. There is no damage to the screen and the unit still works fine. This is driving me crazy. Oh, I forgot maybe our chihuahua held the torch to it.
I have an Acer Aspire 5630 and since 2 weeks i'm having problems with the touchpad and the keyboard. I tried reinstalling Windows Vista which didn't work. Then i tried windows 7 and it also has the same problem( also tried new drivers etc) . With an extern keyboard and mouse it is able to use te laptop.
fn+ f7 doenst work. (because de keyboard doenst work )
The strange part is that when i acces the bios, de keyboard works.
When I use to plug my laptop into the mains you could see the screen got a lot brighter as though it was a power surge. For some reason that no longer happens the display is quite dull and tough to read unless in a dark room!
There was a distinct difference to screen brightness between 'High performance' and 'Power saver' mode. This is no longer the case and the laptop seems stuck in power saver brightness!
I upgraded my RAM to 4gb and installed Vista x64 Home Premium. the system was only showing 3gb on start up so I updated BIOS to 3.50 via DOS as it can not be done inside Vista x64.
Bios update completed and notebook shutdown.
Now no power in notebook.
No lights on when connected via Power adapter or battery.
system will not turn on.
Downloaded and tried the crisis disk to reset the BIOS and still nothing.
I can't seem to load the Touchpad Software fot the Acer 5630 Laptop ? Do I use the Alps or the Synaptics Software ? When I load the Alps I get pop-ups on startup that don't go away asking me if I want to start Apoint.exe and other files. I uncheck the pop-up but it still keeps coming back ? When the computer fully loads and I right mouse click on the Touchpad Icon in the right bottom tray it shows up like regular mouse software. It used to have an area asking me if I want to shut the touchpad. Not anymore. As for the Synaptics Software if fails when I try to load it. Do you have a solution to this problem ? I do use a USB Mouse and never use the Touchpad.
my dad has an Aspire 5630 and he wants to know what sort of upgrades he can do on it, would he be able to upgrade the ram to 1GB and put an 7,200rpm HD in it?
I have a new Aspire 5630 with vista installed. The disk drive is very high speed and whistles loudly when installing applications from dvd. I expect this and it is not a problem The trouble is that when i try to play a music DVD the same sound completely swamps the music and so DVD playback is a NO NO.
On my desktop PC I had a similar problem and had to install Nero Drivespeed which allows me to set playback speed to "silent"
This does not seem to work on vista ( neither does any other program that i have tried.)
Surely this must be a problem to a lot of people and I would assume that there would be a setting in the bundled DVD playback software to solve this problem. Or perhaps there is?
On the Gateway, it's a T2450 (2.0ghz) while the Acer has a T5550 (1.66ghz). I don't know which one is better, but I'm thinking the Gateway would be better (but bigger isn't always necessarily better?)
I was also wondering which one has better tech support and warranty also? This will be my first laptop and I hope it will last me for a long time. I guess I'm looking for a better bang for the buck.
I have an acer aspire 5630 with a geforce 7300 go.
I am suppose to have 1024mo RAM but it only shows physical memory 766 everywhere. In bios, extended sharing is set to 766...and i can't change it, it's in blue.
My video memory is 128.
Is there a way i can change the sharing memory?... so i know if my ram is broken? It still under warranty for a month.
Also, my fan does a huge noise ... but only when i start it.
When a play games like cod4... it's heating but everything is fine, any isues? maybe a bearing? Should I change my fan? cleaning it up does nothing.
